In regards to FNIS 7.0XXL

[arpaschad]

So I just saw that 7.0 was out for a long time and I only found out now through the announcements section of this forum and since my the number of creature animations I have in the SL registry are full I think it might be a good idea to upgrade my FNIS after 3 years...(last version I used was 6.3) so I downloaded the new version, uninstalled the old one, installed 7.0, pointed NMM to where it is located and when I tried to start it this error comes up on the very top of FNIS: ERROR OCCURRED: 53  ..\..\..\TESV.exe

 

so any help resolving this issue would be greatly appreciated...I've tried running it directly but same problem exists...

 

EDIT: Reverted back to 6.3 and everything now works... now to make 7.0 work...

[fore]

Can you post the full FNIS output?

And say where you have Skyrim, FNIS, and MO installed? Which type of device? Error 53 in Windows says "The network path was not found."

is the path between the generator and

One difference between 6.3 and 7.0 is, that 7.0 works for both Skyrim and SSE. And for that FNIS has to check in which environment it is. Which is done by looking for the exe files. And "..\..\..\TESV.exe" is the path between the location of the generator "Skyrim\data\tools\GenerateFNIS_for_Users\GenerateFNISforUsers.exe" and "Skyrim\TESV.exe".

 

Not even knowing if you really use MO, I am a little scared that this could be the cause. Since there have been numerous, different situations, where MO has difficulty dealing with different file locations at the same time (same file in Skyrim\Data, in MO\mods, in bsa, in loose files}. And that often resulted in some Windows errors (like "path not found")

 

[fore]

So I just saw that 7.0 was out for a long time and I only found out now through the announcements section of this forum and since my the number of creature animations I have in the SL registry are full I think it might be a good idea to upgrade my FNIS after 3 years...(last version I used was 6.3) so I downloaded the new version, uninstalled the old one, installed 7.0, pointed NMM to where it is located and when I tried to start it this error comes up on the very top of FNIS: ERROR OCCURRED: 53  ..\..\..\TESV.exe

 

so any help resolving this issue would be greatly appreciated...I've tried running it directly but same problem exists...

 

EDIT: Reverted back to 6.3 and everything now works... now to make 7.0 work...

 

 

Can you post the full FNIS output?

And say where you have Skyrim, FNIS, and MO installed? Which type of device? Error 53 in Windows says "The network path was not found."

is the path between the generator and

One difference between 6.3 and 7.0 is, that 7.0 works for both Skyrim and SSE. And for that FNIS has to check in which environment it is. Which is done by looking for the exe files. And "..\..\..\TESV.exe" is the path between the location of the generator "Skyrim\data\tools\GenerateFNIS_for_Users\GenerateFNISforUsers.exe" and "Skyrim\TESV.exe".

 

Not even knowing if you really use MO, I am a little scared that this could be the cause. Since there have been numerous, different situations, where MO has difficulty dealing with different file locations at the same time (same file in Skyrim\Data, in MO\mods, in bsa, in loose files}. And that often resulted in some Windows errors (like "path not found")

 

Would you please try this version of the 7.0XXL generator. I have replaced the check for TESV.exe with another one, located directly in the generator folder.

 

THe strange thing is, that I use exactly the same path since decades in order to get the Skyrim version number (and I don't want to remove that check, of course). Just in another context, and a little later. Now the place for this "other context" is also earlier than before, and it would not be a surprise if this version would also fail. But it is important for me to know, what really is the cause, or at least the situation, of the failure. 

 

https://drive.google.com/file/d/0B4wJfSHB28r8enlIWXJNNURJLVk/view?usp=sharing 

[arpaschad]

 

So I just saw that 7.0 was out for a long time and I only found out now through the announcements section of this forum and since my the number of creature animations I have in the SL registry are full I think it might be a good idea to upgrade my FNIS after 3 years...(last version I used was 6.3) so I downloaded the new version, uninstalled the old one, installed 7.0, pointed NMM to where it is located and when I tried to start it this error comes up on the very top of FNIS: ERROR OCCURRED: 53  ..\..\..\TESV.exe

 

so any help resolving this issue would be greatly appreciated...I've tried running it directly but same problem exists...

 

EDIT: Reverted back to 6.3 and everything now works... now to make 7.0 work...

 

 

Can you post the full FNIS output?

And say where you have Skyrim, FNIS, and MO installed? Which type of device? Error 53 in Windows says "The network path was not found."

is the path between the generator and

One difference between 6.3 and 7.0 is, that 7.0 works for both Skyrim and SSE. And for that FNIS has to check in which environment it is. Which is done by looking for the exe files. And "..\..\..\TESV.exe" is the path between the location of the generator "Skyrim\data\tools\GenerateFNIS_for_Users\GenerateFNISforUsers.exe" and "Skyrim\TESV.exe".

 

Not even knowing if you really use MO, I am a little scared that this could be the cause. Since there have been numerous, different situations, where MO has difficulty dealing with different file locations at the same time (same file in Skyrim\Data, in MO\mods, in bsa, in loose files}. And that often resulted in some Windows errors (like "path not found")

 

Would you please try this version of the 7.0XXL generator. I have replaced the check for TESV.exe with another one, located directly in the generator folder.

 

THe strange thing is, that I use exactly the same path since decades in order to get the Skyrim version number (and I don't want to remove that check, of course). Just in another context, and a little later. Now the place for this "other context" is also earlier than before, and it would not be a surprise if this version would also fail. But it is important for me to know, what really is the cause, or at least the situation, of the failure. 

 

https://drive.google.com/file/d/0B4wJfSHB28r8enlIWXJNNURJLVk/view?usp=sharing 

 

 

 

I am not using MO but NMM and I installed my Skyrim in Drive D: 

the generator is installed like this: Generator: D:\TSEV Skyrim LE\Data\tools\GenerateFNIS_for_Users\GenerateFNISforUsers.exe

 

and the link you provided needs some kind of confirmation...

[Guest]

Looks like not a valid steam installation.

Be aware that we do not support not-original versions of the game.

[winny257]

Looks like not a valid steam installation.

Be aware that we do not support not-original versions of the game.

 

yes, its installation path is a little strange.

where is the Steam folder? 

[Guest]

 

Looks like not a valid steam installation.

Be aware that we do not support not-original versions of the game.

 

yes, its installation path is a little strange.

where is the Steam folder? 

 

 

you can install your game outside of steam.

You just need to tell steam where you want to put it.

[LazyBoot]

 

 

Looks like not a valid steam installation.

Be aware that we do not support not-original versions of the game.

 

yes, its installation path is a little strange.

where is the Steam folder? 

 

 

you can install your game outside of steam.

You just need to tell steam where you want to put it.

 

Kind of, but steam will still put "steamapps" and usually "common" in the path anyway.

[Guest]

 

 

 

Looks like not a valid steam installation.

Be aware that we do not support not-original versions of the game.

 

yes, its installation path is a little strange.

where is the Steam folder? 

 

 

you can install your game outside of steam.

You just need to tell steam where you want to put it.

 

Kind of, but steam will still put "steamapps" and usually "common" in the path anyway.

 

 

Really? I just moved my folder and when I run skyrim it still boots steam to play it. No steam app or anything on the folder.

[LazyBoot]

Really? I just moved my folder and when I run skyrim it still boots steam to play it. No steam app or anything on the folder.

Well, moving games without properly (re-)installing can easily lead to things not working.

[winny257]

 

Really? I just moved my folder and when I run skyrim it still boots steam to play it. No steam app or anything on the folder.

Well, moving games without properly (re-)installing can easily lead to things not working.

 

 

to it once again to say clearly, this is the installation path for Skyrim: \Steam\SteamApps\common\Skyrim, whether C, D, E, or anywhere else!

Skyrim is a Steam Game and can only be (legally) installed via Steam.

[Guest]

 

 

Really? I just moved my folder and when I run skyrim it still boots steam to play it. No steam app or anything on the folder.

Well, moving games without properly (re-)installing can easily lead to things not working.

 

 

to it once again to say clearly, this is the installation path for Skyrim: \Steam\SteamApps\common\Skyrim, whether C, D, E, or anywhere else!

Skyrim is a Steam Game and can only be (legally) installed via Steam.

 

 

I run mine from D drive.

If you think I don't own it legally then you can check my steam page.

[winny257]

 

 

 

Really? I just moved my folder and when I run skyrim it still boots steam to play it. No steam app or anything on the folder.

Well, moving games without properly (re-)installing can easily lead to things not working.

 

 

to it once again to say clearly, this is the installation path for Skyrim: \Steam\SteamApps\common\Skyrim, whether C, D, E, or anywhere else!

Skyrim is a Steam Game and can only be (legally) installed via Steam.

 

 

I run mine from D drive.

If you think I don't own it legally then you can check my steam page.

 

 

that I have never claimed, my skyrim is also on D drive.

it is not about you, it is about this path: D:\TSEV Skyrim LE\Data\tools\!

this path is impossible!

I already said Skyrim is a Steam game, it is impossible to install without steam, so Skyrim must appear in the Steam folder.

[Guest]

 

that I have never claimed, my skyrim is also on D drive.

it is not about you, it is about this path: D:\TSEV Skyrim LE\Data\tools\!

this path is impossible!

I already said Skyrim is a Steam game, it is impossible to install without steam, so Skyrim must appear in the Steam folder.

 

 

Are you aware after installation you can move the skyrim folder to exactly the path you described and run the game through steam regardless? Just manually click the .exe file and the game runs.

When you launch the game through either SKSE or the base game Steam pops up. I myself put all the skyrim copies (I have like 6) in a "Skyrim Masterfile" and as I mod various ones or break them I just jump to the next copy I made of the vanilla version.

 

So far I have never had any issue.

[winny257]

 

 

that I have never claimed, my skyrim is also on D drive.

it is not about you, it is about this path: D:\TSEV Skyrim LE\Data\tools\!

this path is impossible!

I already said Skyrim is a Steam game, it is impossible to install without steam, so Skyrim must appear in the Steam folder.

 

 

Are you aware after installation you can move the skyrim folder to exactly the path you described and run the game through steam regardless? Just manually click the .exe file and the game runs.

When you launch the game through either SKSE or the base game Steam pops up. I myself put all the skyrim copies (I have like 6) in a "Skyrim Masterfile" and as I mod various ones or break them I just jump to the next copy I made of the vanilla version.

 

So far I have never had any issue.

 

 

yes, in this case you are right, You can move the Skyrim folder after installation, but a connection to Steam should always remain.

I used a short time a NO steam crack, because me steam with its monitoring and shit advertising went on the nerves.

but after a short time removed again, no more updates and thus many problems.

[V3rius]

 

 

that I have never claimed, my skyrim is also on D drive.

it is not about you, it is about this path: D:\TSEV Skyrim LE\Data\tools\!

this path is impossible!

I already said Skyrim is a Steam game, it is impossible to install without steam, so Skyrim must appear in the Steam folder.

Just wanted to add that my skyrim lies on "Program Files (x86)\Skyrim (Special)". I did the same thing, i copied it from the Steam Folder ("Program Files (x86)\Steam\steamapps\common\Skyrim") and everything works.

Originally i planned to mod one Game "normal" and another with stuff from here, but that was to much hassle and MO made things easier  .

In Short: The Folder can be outside of the Steam Folder Path while still be a valid copy. 

 

 

 

yes, in this case you are right, You can move the Skyrim folder after installation, but a connection to Steam should always remain.

 

This is as far as i know correct.

[winny257]

 

---snip---

In Short: The Folder can be outside of the Steam Folder Path while still be a valid copy. 

 

---snip---

 

 

Yes, thats right, I already said a move is possible, but the folder which you move called * Skyrim * and not * TSEV Skyrim LE *!

and renaming the Skyrim folder is not advisable, because this renamed (TSEV) Skyrim (LE) folder is no longer recognized by the Skyrim EXE.