ItalianDragon Posted February 9, 2020 Share Posted February 9, 2020 8 hours ago, Felixa said: tried hard. but failed. I'm a complete noob about these things. It looks like i have to wait for that gentleman to fix it.or just give up. btw I modified the textures. but the effect is not ideal,. not the problem of covering, but the textures itself and some settings on the body do not match. There is no match at all in the setting of BS. I haven't tried to replace other nipples, at least my skill can't do that If you can make a better hi-res screenshot of the misalignment issue I can fix it. Takes like 5 minutes to do in photoshop. Link to comment
Thanosfarmer Posted February 9, 2020 Share Posted February 9, 2020 On 2/8/2020 at 2:42 PM, Felixa said: emmmmm……That's quite difficult for me. I can't modify DDS files……so Could you help fix it? please…… you can either do what Italiandragon suggested or you can download paint net. It is free and natively supports .dds file. Downside is it has less tools than photoshop. It has clone tool though. that is what you need right now. I edited both normals and diffuse textures with paint .net 1 Link to comment
Felixa Posted February 10, 2020 Share Posted February 10, 2020 12 hours ago, Shigtay said: you can either do what Italiandragon suggested or you can download paint net. It is free and natively supports .dds file. Downside is it has less tools than photoshop. It has clone tool though. that is what you need right now. I edited both normals and diffuse textures with paint .net I tried to modify it with PS, but I didn't seem to find the right way. I referred to another normal skin map, and then tried to move the position of the nipple there, at least it seemed ok. I think it can solve this problem, but as a result, the effect is very strange, because the shape of the nipple is different, the root is not covered well, and the shadow under the chest is also squeezed together. Link to comment
Felixa Posted February 11, 2020 Share Posted February 11, 2020 On 2/10/2020 at 1:23 AM, Shigtay said: you can either do what Italiandragon suggested or you can download paint net. It is free and natively supports .dds file. Downside is it has less tools than photoshop. It has clone tool though. that is what you need right now. I edited both normals and diffuse textures with paint .net Today, I tried to replace the nipple. It's much better. But because it's still a female body in essence, it uses a male textures so the position is too low. It doesn't look very good. looks like it's almost over. anyway thx for your advice 1 Link to comment
Ashen1 Posted February 12, 2020 Share Posted February 12, 2020 Hey can someone port this to fo4 (cbbe) (with animated/physics anus) (as a male for unique player) I was working on a femboy mod for fo4 but my computer died on me. (Now I have to wait a while to get new one sigh...) Link to comment
Ashen1 Posted March 2, 2020 Share Posted March 2, 2020 2 hours ago, mekanikaru said: Hide contents I'm trying to port this to fallout 4 with animated anus and I'm not sure on how to do it. 1 Link to comment
vfmolinari10 Posted March 3, 2020 Share Posted March 3, 2020 How can I make such attractive characters? I'm fairly new to modding, so my knowledge extends so far as youtube tutorials go. I understand some of the femboys here are female bodies edited in Bodyslide, but I really don't know how to use it properly, and even when I can just make a girl with no boobs, the shadows already painted under the breasts looks really out of place. Am I having the wrong approach, or is Bodyslide the way to go? 2 Link to comment
angryjeo Posted April 17, 2020 Share Posted April 17, 2020 On 2/7/2020 at 7:53 PM, Felixa said: thx. but But forget what I just said. i tried the SE version,It works very well.The only problem is that the Texture of nipples doesn't seem to be aligned hi, may i ask how you got it to work in LE? when i try to load it in game my whole character gets purple shining textures, tried converting them to dxt1 in photoshop too but same thing. im using CBBE. 1 Link to comment
ItalianDragon Posted April 17, 2020 Share Posted April 17, 2020 I keep on posting on the other thread but I forgot there was this one for all things femboy. I've been working on a femboy custom race with scratch-made body meshes which I plan to make customizable through BodySlide. I've recreated one I'd made modifying BodySlide files (which I didn't know wasn't permitted) in Zbrush and now I'm entering the detailing/finishing pass along with some anatomy fixes. ^^ Here's how it looks now: Spoiler 3 Link to comment
Ashen1 Posted April 18, 2020 Share Posted April 18, 2020 5 hours ago, ItalianDragon said: I keep on posting on the other thread but I forgot there was this one for all things femboy. I've been working on a femboy custom race with scratch-made body meshes which I plan to make customizable through BodySlide. I've recreated one I'd made modifying BodySlide files (which I didn't know wasn't permitted) in Zbrush and now I'm entering the detailing/finishing pass along with some anatomy fixes. ^^ Here's how it looks now: Reveal hidden contents Any thoughts on making a fo4 version? I tried to make one but my pc died. Link to comment
ItalianDragon Posted April 18, 2020 Share Posted April 18, 2020 9 hours ago, Ashen1 said: Any thoughts on making a fo4 version? I tried to make one but my pc died. Once I'm 100% done with the Oldrim one, sure, why not I was already considering on making a SSE versionlater on and since both SSE and FO4 run on the same engine it wouldn't be excessively difficult to do. Main problem would be adjusting to FO4's character creation which is very different from Skyrim's so I'd likelyhave to do a lot of tinkering to get it to work properly. 1 Link to comment
Ashen1 Posted April 18, 2020 Share Posted April 18, 2020 3 hours ago, ItalianDragon said: Once I'm 100% done with the Oldrim one, sure, why not I was already considering on making a SSE versionlater on and since both SSE and FO4 run on the same engine it wouldn't be excessively difficult to do. Main problem would be adjusting to FO4's character creation which is very different from Skyrim's so I'd likelyhave to do a lot of tinkering to get it to work properly. You have my undying gratitude \[T]/ 1 Link to comment
Ashen1 Posted April 19, 2020 Share Posted April 19, 2020 On 4/18/2020 at 9:35 AM, ItalianDragon said: Once I'm 100% done with the Oldrim one, sure, why not I was already considering on making a SSE versionlater on and since both SSE and FO4 run on the same engine it wouldn't be excessively difficult to do. Main problem would be adjusting to FO4's character creation which is very different from Skyrim's so I'd likelyhave to do a lot of tinkering to get it to work properly. Oh yeah if I remember correctly fo4 bodies have the feet and body in one mesh. Link to comment
ItalianDragon Posted April 20, 2020 Share Posted April 20, 2020 3 hours ago, Ashen1 said: Oh yeah if I remember correctly fo4 bodies have the feet and body in one mesh. Not just that, the sliders are also completely different from what Skyrim/SSE uses. So ye, I'll have to do quite a bit of learning on that aspect. 1 Link to comment
Ashen1 Posted April 20, 2020 Share Posted April 20, 2020 5 hours ago, ItalianDragon said: Not just that, the sliders are also completely different from what Skyrim/SSE uses. So ye, I'll have to do quite a bit of learning on that aspect. Just curious, what are you gonna do about the dick? I couldn't figure that one out. Link to comment
ItalianDragon Posted April 20, 2020 Share Posted April 20, 2020 2 hours ago, Ashen1 said: Just curious, what are you gonna do about the dick? I couldn't figure that one out. IDK yet to be honest. Skyrim/SSE have SoS for that aspect but IDK waht Fallout 4 has as a mod of that type (if it has one to begin with that is). So yep, I'll have to do a bunch of research into that jsut to figure out WTF to do next ^^ Link to comment
Ashen1 Posted April 20, 2020 Share Posted April 20, 2020 3 hours ago, ItalianDragon said: IDK yet to be honest. Skyrim/SSE have SoS for that aspect but IDK waht Fallout 4 has as a mod of that type (if it has one to begin with that is). So yep, I'll have to do a bunch of research into that jsut to figure out WTF to do next ^^ Look up Advanced Animation Framework (AAF). I couldn't figure it out but hopefully you will. Edit: will the butt be jiggly? Link to comment
ItalianDragon Posted April 20, 2020 Share Posted April 20, 2020 9 hours ago, Ashen1 said: Look up Advanced Animation Framework (AAF). I couldn't figure it out but hopefully you will. Edit: will the butt be jiggly? Thanks, I'll look into it And yep, jiggly butts will jiggle :3 1 Link to comment
Felixa Posted April 22, 2020 Share Posted April 22, 2020 On 4/18/2020 at 3:59 AM, angryjeo said: hi, may i ask how you got it to work in LE? when i try to load it in game my whole character gets purple shining textures, tried converting them to dxt1 in photoshop too but same thing. im using CBBE. Sorry, I don't know how to convert SE back to LE,this textures is not made by me. You'd better ask the original maker. He's in this post,and Shigtay said he could make the Le version. Link to comment
SavrenX Posted April 24, 2020 Share Posted April 24, 2020 23 hours ago, KittenCupcakes said: By any chance, is that armor up for DL? I wanted to try making a male version of 2B myself That assets from team tal though. I don't have permission to load it as my refit. Not to mention i use other body mod. ? But femboy always be femboy no matter what armor. This one femboy ebony armor. Spoiler 4 Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now