I need a lot of help with this annoying Bodyslide issue

[HexedPrincess]

So put simply I am trying to change the sizes for an armour I found for a themed character but it didn't inherently have bodyslide (which by itself is annoying considering the character) but I managed to find some data. After making my own in outfit studio, however, and countless hours wasted, I can't get this to work at all.

 

 

I make this in bodyslide.

 

 

But get this in-game.

 

 

The body is missing and parts are clipped to hell and back. I have tried checking the nif directly in nifskope, and it's showing exactly what I made in bodyslide. I am honestly at wits end here and I need some help, big time.

[foreveraloneguy]

Open OFS. Open the project. Click slider > conform all. Click File > save project. Close OFS. Rebuild the outfit in bodyslide.

[Guest]

What you could do is make a conversion slider. The idea behind this is using sliders you're going to make a slider going from your
low weight body to your high weight body so that when you're building outfits for your body you only ever need to convert an 
outfit for you low weight and use the slider to make the high weight. It will make building outfits simple and easy.
 
I'll go on explaining if you need further help later when I get off work you can message me if you want to go this route which will
save you time in the long run and if you already know all this stuff then well maybe someone else will find it helpful ^^
 _________________________________________________________________________________________
HOW BODIES WORK

So basically your body has two weights 0 and 1.
the 0 weight is a low weight while the 1 weight is a high
 
0 weight= 0 
1 weights=100
 
weights between 0-100 are calculated between the two thats why they both need to be built.

 
 (Step One)
BUILDING A PRESET

1.) Open up Bodyslide
2.) Set Outfit/Body dropdown to "UUNP Special" for example
3.) Set the sliders and configure your body from the low weight to the high weight
4.) When you're done select Save As and save it under its respective group.
5.) Then Click Build.
 
hint: in the boxes where the percentage is can also be set to negative numbers.
hint #2: Select "Preview" and move the slider at the top back and forth to see your body from both weights

(Step Two)
BUILDING A CONVERSION SLIDER

1.) Open up Bodyslide
2.) Open Outfit Studio
3.) Select file>New Project and then select Unified UNP Special click Next
4.) for you outfit you want to select "femalebody_0.nif" located in (meshes\actors\character\character assets\) then click finish.
5.) Now for the outfit(femalebody_0) that was loaded you want to right click and delete any other object that isn't your body.
6.) Repeat Step 4 & 5 but with "femalebody_1.nif" but make sure you select "Keep Other Shapes" before clicking finish.
 
RECAP: You should have UUNP Special loaded as Reference in green and the two objects/outfits below it are femalebody low/high for 
your preset.
 
7.)Now you want to hide your reference select only your Low weight Femalebody object and press ctrl+c this is a shortcut to the conform all. command.
8.) Then without exiting out of Outfit Studio you'll bring up your Bodyslide window and select your preset

 _________________________________________________________________________________________
 
Still editing... I'll be back later i have to go to work.