tato34 Posted February 5, 2015 Posted February 5, 2015 check the captures and help me to find error thanks in advanced and sorry for my bad english
prideslayer Posted February 7, 2015 Posted February 7, 2015 I'm going to give you a suggestion or two. 1. Use SCOF. When you first start the game, at the main menu before doing anything else, open the console and enter: scof "debug.txt" Do not edit that file. Just upload it here, then delete it -- since making a "new" one does not delete the old one, it'll just keep growing. 2. Read the how to get help instructions, and follow them. Several people have tried to help you in the sewerslave thread and you're not following their instructions to get more information. It's impossible to help someone that does not cooperate.
tato34 Posted February 7, 2015 Author Posted February 7, 2015 This file is uploaded with other active mods when you can now upload the mod only with sewerslave thanks in advanced ConsoleOutputFile - 2_7_2015.txt
tato34 Posted February 7, 2015 Author Posted February 7, 2015 and I uploaded this file to only activated mod sewer slaver thanks in advanced and sorry for my bad english ConsoleOutputFile - 2_7_2015.txt debugtext.7z
tato34 Posted February 7, 2015 Author Posted February 7, 2015 Now I hope I have followed the instructions carefully and apologize if correctly followed orders
prideslayer Posted February 7, 2015 Posted February 7, 2015 Listen. Your English doesn't need an apology, but it does make it difficult to explain things to you. You have not followed the instructions. Since communicating is difficult, there is no alternative. I promise if you follow the instructions, your problems will go away. ------------ The file in that debugtext.7z does not have anything in it. You just need to figure this out on your own. It's easy. Disable all your mods, and test. If it doesn't work, something is not installed correctly -- reinstall and test again. If it does work, then enable ONE thing and test again. Repeat this process until it stops working, and you have found the problem.
tato34 Posted February 7, 2015 Author Posted February 7, 2015 I do not understand I do wrong I tried to follow your instructions but can not get it right can not I understand your instructions I apologize but I'm trying to do everything you indicate me and sorry for wasting your time with someone like me thank you to borrow your support sorry for my bad english ConsoleOutputFile - 2_7_2015.txt
Halstrom Posted February 7, 2015 Posted February 7, 2015 Perhaps you should also post in your own language and english so someone who speaks your language could help you or clarify your issues.
prideslayer Posted February 7, 2015 Posted February 7, 2015 His issue is pretty clear -- he's getting an error in a sexout ESM script. The problem is he doesn't seem to be following the "troubleshooting" instructions of disabling all the mods and enabling one at a time. If he did that and it still didn't work with just sexout and sewerslave, then something is installed incorrectly like NX or NVSE.
tato34 Posted February 8, 2015 Author Posted February 8, 2015 thanks objectives for me is ? reinstall fallout nv nvse nvse extender pd: I will be inactive a few days for me are operating on the 9th I begin to operate
prideslayer Posted February 8, 2015 Posted February 8, 2015 You need to reinstall at least NVSE and NX, starting over with the whole game couldn't hurt though.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.