Transfer Settlements - The Slog Recreational Facility

[msmfoster]

Transfer Settlements - The Slog Recreational Facility

View File

---

The Slog Recreational Facility

A Transfer Settlements blueprint that attaches a multi-level administrative building to the shower facilities and adds a greenhouse. The end effect increases bunk space and food production, while simultaneously increasing defensive capabilities.

 

Quote

Have you seen Dierdre's dirty little secret in the attic?

Details on this build:

• Main building houses shops and medical facilities with a central lounge area.
• Open warehouse over the settlement workshop for workbenches and additional turrets.
• Large greenhouse provides additional defensive capability in that area.
• Brick structure added to the main building.
• First deck: Contains washrooms, gym, and kitchen.
• Second deck: Contains bunks, and the third houses a barber shop.
• Third deck: Contains a barbershop, massage table, and spa.
• Easy roof access of The Slog through the administrative building.

 

Note. It is possible to open up a doorway between The Slog and adjoining administrative building. However, NPCs will not use it and it may cause visual glitches. Save before you scrap the wall.

Settlement Features

• 25 bunks.
• 130 food.
• 630+ defence.
• 260 power.
• 60+ water.
• Tier 3 Medical, Restaurant, Clothing, and General Store.
• Dedicated gym area.
• Vault-Tec drink dispenser and slot machines.
• Working sinks and showers.
• Power mostly runs through conduits to minimise visible power lines.
• Cat and dog included in the build.
• No visual glitches observed from this build.

Requirements

Downloadable Content

• Contraptions Workshop
• Vault-Tec Workshop
• Wasteland Workshop
• Far Harbour

Hard Requirements

• Transfer Settlements. To import this blueprint.
• Scrap Everything or an equivalent. To clear out the area as per Setup Instructions.
• Homemaker. Primary build components for most of the settlement, decorations, furniture, and miscellaneous objects.
• Settlement Objects Expansion Pack. Fusion generators, railings, pools, foundation liners, cooking station, and water pumps.

 

Note. Transfer Settlements will not add items if the mods are missing. Mods listed below are not required but will remove associated elements.

Soft Requirements

• Craftable Working Sinks and Showers Redux. Working sinks and showers.
• Erotic Art. Frames and pictures used throughout.
• Working Fridges. Simple mod that adds working fridges, ice machines, and vending machines.
• Working Washer and Dryer (Immersive Laundry). Player functional laundry machines and dryers with sound effects.
• Singing Settler. Flooring for the gym and barber shop.

Nice to Have

• Armour and Weapon Keywords Community Resource. Additional types of workshops, namely power armour.
• Videos of the Wasteland. Working televisions and projectors.
• Invisible Furniture. Adds invisible markers that are used as idles for settlers and pets.
• Gruffydd's Signs and Posters. Billboards and signs.
• Crazy Sex Animations. Invisible mats that make settlers happy through masturbation, done without using the Advanced Animation Framework, and additionally places assignable gurneys that increase happiness.
• Sex Toys of the Commonwealth. Adds the random placement of sex toys throughout.
• Companion Ivy. If you happen to have Ivy as a companion, one of her broadcast towers will be added in an out of the way area.

Unrelated But Useful

• Place Everywhere. Allows you to make minor adjustments if necessary.
• Armour Rack Female Mannequin Fix. Fixes the armour rack to support alternate bodies like Fusion Girl.

Setup

Clearing the area is relatively straightforward:

• Cleanup the area removing all beds, showers, furniture and junk.
• The pool and surrounding areas should be clear of clutter, brush, and park elements.

Maintain the following:

• Maintain the existing food production, since this build will simply add-on to the existing stock.
• The fire pit besides the boarded up door leading into Arlen's workshop.

A few elements cannot be scrapped normally, in this case you will need to do the following:

• Go into the console.
• Select the object (E.g., Holly or Dierdre's bed).
• Disable
• MarkForDelete

 

Note. Disable first in case you selected the wrong object. In that case Enable will recover the object without consequence.

Build a Transfer Settlements console from Power > Miscellaneous on top of the workshop.
 

Note. Import should be done with Workshop Mode enabled.

Tasks After Import

No additional requirements other than confirming that all power has been restored as expected.

Notes on Imports

Transfer Settlements recommends leaving the area after import and to not return for 1-2 game days. However, I found that saving on site always crashes the game.

The easiest way to get away and save is to coc Vault111Ext from the console. Wait a couple of minutes before heading into the vault. Once you arrive at the bottom it is safe to save.

I recommend that you import/export Blueprints using Stable defaults. Using other methods has caused ladders, walls, and flooring to appear without collision. In many cases the collision effects are found elsewhere leading to interesting behaviours among the NPC population, and leading to a snap back effect as you push through an area and are forced back by the invisible wall.
 

Note. This blueprint was tested with Transfer Settlements working under Stable.

Lastly Import wired power connections should always be selected as part of the import process. It will reliably re-connect all wired connections. This saves you the trouble of linking up floors, turrets, and in some cases re-establish connections for hidden or buried runs.

Notes on Power and Performance

These blueprints utilize ambient fill lighting to provide a pervasive glow. I use Naked Bulbs to create a lived-in atmosphere for statues, fountains, and roof voids.

Warning for Dynamic Lighting Users

If you use mods that turn all lights into dynamic, shadow-casting sources, the sheer number of these bulbs will severely cripple your framerate. I strongly recommend using the Transfer Settlements Blueprint Editor to strip out all instances of 306F1 before importing.

Optimization for Complex Builds:
Because of the heavy use of conduits to reduce visible power lines, these settlements have high object counts. To steps below may improve performance.

• Enable Faux Power in the Workshop Framework's workbench settings.
• Use the Transfer Settlements Blueprint Editor to strip all conduits from the .json file.

This can reduce build complexity by up to 40% without losing the overall aesthetic of the settlement.
 

Note. I cannot guarantee the above will work.

A Special Thanks To

Thank you to Caladon for creating the template that makes blueprints installable.

Thank you to PiCSeL for the magazine and painting retextures seen in the screenshots.

Updates

Version 1.0.1

• Added washers and dryers from Immersive Laundry.
• Increased the amount of idles found throughout.
• Closed off the roof of the administrative building, while maintaining the same amount of turrets.
• Added a saloon, spa, and massage parlour mix within the additional space created above.

 

---

• Submitter
  msmfoster
• Submitted
  10/24/25
• Category
  Sexual Content
• Requirements
  Transfer Settlements