Sink of Scrubbing - SexLab Integration

[Splintered_Lizard]

Oh! Yes, BISR, that's correct.

 

So you can never get fully clean with a basin? The problem is this: My character looks clean except she has some cum on her. I use the basin to clean it off and the basin applies slightly dirty--giving her dirt that was not there before. I do not like this behavior as it makes no sense. She wasn't dirty but she gets dirty from using a basin? It'd be one thing if she was covered in dirt already, but my character was not.

Edited March 11 by Splintered_Lizard

[kaxat]

@Splintered_Lizard I will consult with Nuascura. Adding dirt that was not there before sounds like unintended behavior in BISR. I would not be surprised if they want to patch it in a future update.

 

If the behavior is expected I can always alter the code to be do a full clean. That will make BISR unlike the other mods which do partial cleans, and thus there is still a reason to fully bathe at times. It also means that the wash basin will trigger a "bathing" message in BISR which is not quite accurate.

 

Thanks for the report.

[Nuascura]

@Splintered_Lizard  Thanks for the report. I dissected BiSR's scripts and found a potential issue. I had some time to test a resolution with kaxat's latest public version of this Sink of Scrubbing addon and can confirm that my latest test build works a-okay. Please test with 2.7.6 when I release it on Nexus.

 

Rather than either of our mods making you "slightly dirty," BiSR just wasn't able to properly bathe the actor and reset its spells. The issue appears to stem from the fact that my revised function sequences are built around BiSR's own animation sequences. So Kaxat's passing of the NoAnimate argument wasn't taken into proper consideration by my scripts.

 

If the above isn't the case and BiSR actually adds dirt to you when you bathe as you say, then I'm unfortunately a little lost on the cause. Maybe it is a semantic issue / misunderstanding:

 

Since Kaxat's function does not pass any soap forms to BiSR, your actor is always treated as having bathed with a wash rag. So, from a dirt tier scale of 0 to 4 where 0 is cleanest, you will only ever return to dirtiness tier 1 (Not Dirty). It is possible that your dirt thresholds were inadventently set to overlapping values, or the percentage at which overlays begin applying is set too low.

Edited March 11 by Nuascura

[Splintered_Lizard]

Thank you, I will look about for the newest release when it drops and try it out. I will also double check some values next time I play.  

[tatkaa4]

Good afternoon.

I can't add a washbasin.

I have "Bathing in Skyrim -1.5", Sink of Scrubbing - Interactive Wash Basins, and Sink of Scrubbing - SexLab Integration v1_2_0.

When I enter placeatme SoS_Washbasin in the console, nothing happens.

[kaxat]

@tatkaa4 I should have elaborated on that suggestion. It works if you have all of the common SKSE Console plugins installed. But not everybody installs those.

 

The problem you are facing is that SoS_Washbasin is an Editor ID (EDID). EDIDs are text and typically never change. But Vanilla Skyrim prefers Form IDs in the console. Form IDs are an 8 character hexadecimal number that change with your load order. In my case SoS_washbasin is FE440800. For you it will be different. Console commands are considerably easier if you have the mods installed that allow you to use EDIDs. 

 

I forget which mod fixes this. It might be PO3 Tweaks which loads more EDIDs in memory so they can be referenced. Or perhaps it is one of the other console mods I have installed. More Informative Console, ConsolePlusPlus, ConsoleUtil, or Console Commands Extender.

 

If you do not wish to install mods that make console commands easy then another option is to type help "Wash basin" 4 ACTI. I think that command works in vanilla Skyrim. It will tell you the Form ID for the washbasin in your load order. Use that instead. i.e. PlaceAtMe FE440800.

 

Another problem you may face is that the wash basin might be placed at a weird angle. You can click on it in the console and type setangle x 0 and then follow it up with setangle y 0 to stand the basin upright.

 

After moving a basin or changing its angle, type disable and then enable to see the changes take immediate effect. Alternatively you can leave the area and come back.

 

Edit: One other problem might be that you forgot to select the player before typing PlaceAtMe. PlaceAtMe works on whatever object you have selected in the console. If it is the character it will place the basin at your feet. If instead you select a rug, it will place the basin in the middle of the rug.

Edited March 16 by kaxat

[tatkaa4]

4 hours ago, kaxat said:

@tatkaa4 Я бы хотел подробнее остановиться на этом предложении. Оно работает, если у вас установлены все стандартные плагины SKSE Console. Но не все их устанавливают.

 

Проблема, с которой вы столкнулись, заключается в том, что SoS_Washbasin — это идентификатор редактора (Editor ID, EDID). EDID — это текст, который обычно не меняется. Но в ванильной версии Skyrim в консоли используются идентификаторы форм. Идентификаторы форм — это 8-значное шестнадцатеричное число, которое меняется в зависимости от порядка загрузки. В моем случае SoS_washbasin — это FE440800. У вас будет другое значение. Консольные команды значительно упрощают работу, если у вас установлены моды, позволяющие использовать EDID.

 

Я уже не помню, какой мод это исправляет. Возможно, это PO3 Tweaks, который загружает в память больше идентификаторов EDID, чтобы на них можно было ссылаться. А может, это один из других установленных мной консольных модов. Например, More Informative Console, ConsolePlusPlus, ConsoleUtil или Console Commands Extender.

 

Если вы не хотите устанавливать моды, упрощающие использование консольных команд, можно ввести help "Умывальник" 4 ACTI. Думаю, эта команда работает в ванильной версии Skyrim. Она выдаст вам идентификатор формы умывальника в вашем порядке загрузки. Используйте его вместо PlaceAtMe FE440800.

 

Еще одна проблема, с которой вы можете столкнуться, заключается в том, что раковина может быть установлена под неправильным углом. Вы можете нажать на нее в консоли и ввести setangle x 0, а затем setangle y 0, чтобы поставить раковину вертикально.

 

После перемещения раковины или изменения ее угла наклона введите отключить, а затем включить, чтобы изменения вступили в силу немедленно. Либо вы можете выйти из области и вернуться обратно.

 

Примечание: возможно, вы забыли выбрать игрока перед тем, как ввести команду PlaceAtMe. PlaceAtMe работает с любым объектом, который вы выбрали в консоли. Если это персонаж, то раковина будет поставлена у его ног. Если же вы выберете коврик, раковина будет поставлена в центр коврика.

 

Thank you very much for your prompt and open response.

I didn't have More Informative Console installed, but after installing it, everything worked.

[Ursur1major]

I am a bit confused on how to use this mod.
I've got it and all requirements installed but when I try to refresh myself my dirt level doesn't change at all.

I am just supposed to interact with a Wash Basin, click "Refresh yourself" and it's supposed to work right?

[Ursur1major]

I'm getting the popup message about feeling refreshed.

But my dirtiness never goes down, I know sink of Scrubbing is not supposed to make you fully clean, at least with the other mods.

But I'm at 66% dirtiness before using it, and 66% dirtiness after using it.

[LynErso666]

I tested for a long time on many playthroughs and it just kinds sits there. Cool lil scrubbing bonus when cleaned, but it certainly doesn't do any cleaning of Sexlab's cum at all. No effects whatsoever aside from the base bonuses u get from Sink of Scrubbing itself. I can only imagine it's just completely incompatible with SLACS2, either that or it just doesn't work with Sexlab at all anymore or something.  SLACS2 cleaning hotkey works great tho. Apparently an entirely new system for the cum is used with SLACS2 is used.

I'm not using Dirt and Blood or anything like that, because well, all of those dirt mods are full of bugs, conflicts and all sorts of nonsense, and I used Dirt and Blood when it first came out for years. Never again with any of that nonsense. And it appears it's still way more trouble than it's worth.

I'd so appreciate a SLACS2 patch someday tho! Thank u very much for all the time u spent on this. 🩷

Edited July 1 by LynErso666

[43deadwood]

On 3/16/2026 at 5:24 AM, tatkaa4 said:

Good afternoon.

I can't add a washbasin.

I have "Bathing in Skyrim -1.5", Sink of Scrubbing - Interactive Wash Basins, and Sink of Scrubbing - SexLab Integration v1_2_0.

When I enter placeatme SoS_Washbasin in the console, nothing happens.

Try

player.placeatme SoS_WashBasin

This works well for me

I use Jaxonz Positioner to move it into place - but once moved it won't function until a cell re-set, so if you're going to do this use it first!

[kaxat]

On 7/2/2026 at 9:13 AM, 43deadwood said:

I use Jaxonz Positioner to move it into place - but once moved it won't function until a cell re-set, so if you're going to do this use it first!

 

You can probably select the wash basin in the console and disable then enable the object. So type disable and press enter. Then enable and press the enter key.

 

For some reason the game engine does not fully update when you move furniture. The visuals will move but the interaction hitbox and entrance points remain at the old position. Briefly disabling the object causes these to update and move to the new location. Or you could wait for the cell to unload.

 

  

On 4/22/2026 at 8:09 AM, Ursur1major said:

I'm getting the popup message about feeling refreshed.

But my dirtiness never goes down, I know sink of Scrubbing is not supposed to make you fully clean, at least with the other mods.

But I'm at 66% dirtiness before using it, and 66% dirtiness after using it.

 

What mod are you using that adds dirt?

 

  

On 7/1/2026 at 2:59 AM, LynErso666 said:

I'd so appreciate a SLACS2 patch someday tho! Thank u very much for all the time u spent on this. 

This mod calls the vanilla SexLab.ClearCum() function. It is unfortunate if SLACS2 does not support that function. But it might support it on some versions of SexLab. I know P+ fires off the event Sexlab_ClearCum so that other mods can easily support when this function is called. I would not be surprised if Osmel's tweaks has a similar fix.

Edited Sunday at 04:22 AM by kaxat

[Ursur1major]

6 hours ago, kaxat said:

What mod are you using that adds dirt?

Bathing in Skyrim - Renewed.