TBD SE - [TRX] Futanari addon

[slash197]

TBD SE - [TRX] Futanari addon

View File

---

Info:

TRX Futanari Addon, converted to (imperfectly) fit the Touched By Dibella body.

 

Combined all of the pubic hairs into one BodySlide file, with individual zaps.  Second image is the pubic hairs in order.

 

Attached a TBD version of the TRX seamless texture .blend file, to assist in making more seamless textures.  All screenshots except the first two were taken using this resource.

 

Install:
Activate in mod manager of choice or manually extract to Data folder.
Build meshes in BodySlide, "outfit" named the same as this file.

 

Credits:

TRX Futanari Addon: TRX_Trixter

Touched By Dibella: Themilkdrinker

Original Nyl2Balls slider: JohnyBungalow1

TBD-TRX_seamless_sample.blend

---

• Submitter
  slash197
• Submitted
  03/16/2023
• Category
  Adult Mods
• Requires
  TRX Futanari Addon, Touched By Dibella body
• Regular Edition Compatible
  No

 

[XD4RKPL4YERX]

[someuselessuser]

Correct diffuse now unless I packed wrong files.

Are there textures for TBD somewhere? I can't seem to find any so I attempted creating textures for default TBD options. Diffuse is complete failure, normal is workable, specular or whatever it is I don't even know if it makes a difference, subsurface texture is same blank small texture from TBD. I don't mind using diffuse from other skins much so it is fine as long as I can keep my TBD normal map.

 

TRX TBD Textures.7z

Edited March 27, 2023 by someuselessuser

[slash197]

Any CBBE texture works for TBD.  Any dick texture patched for those skin textures, and not run through my modified seamless resource, will have more visible seams under different lighting and viewing angles. 

 

The video guide for the seamless resource goes through every step.

[someuselessuser]

I did use the resource but turns out my stupid ass exported unmodified diffuse. Updated my previous post with correct file.

 

Modified chastity belt from Devious Devices to not clip with this. Widened front slit a lot and moved the lock higher and made it a little smaller. Textures look stretched due to me basically torturing the mesh but shiny flat texture variants from new DD versions look better.

DD - TBD - Futanari.7z

[ShufflesLucario]

from what i'm seeing, the balls slider wasn't included in the files

 

[slash197]

37 minutes ago, ShufflesLucario said:

from what i'm seeing, the balls slider wasn't included in the files

 

 

It's definitely there.  Did you get the correct file, 1-2?  The slider is down at the bottom of the dick sliders, below the zaps for the pubic hairs.

[Naitoraz]

Amazing work man!

 

How hard would it be to port the slider to the male version?

[ShufflesLucario]

15 hours ago, slash197 said:

 

It's definitely there.  Did you get the correct file, 1-2?  The slider is down at the bottom of the dick sliders, below the zaps for the pubic hairs.

ah i see, im blind haha

would there be any way to get that balls slider working for this addon? 
 

 

[slash197]

Either of those wouldn't be hard, but you'll have to ask donnerwetter or Trickster to do it.  The crotch connections are different enough that I want to keep my hands only on my TBD versions.

[donnerwetter]

2 hours ago, ShufflesLucario said:

ah i see, im blind haha

would there be any way to get that balls slider working for this addon? 
 

 

 

I've actually looked into cribbing some sliders from UBE onto my schlongs, though you'd also need to add the sliders to the bodies meshes. From my tests, just making the seams look good would probably be a couple of evenings' work in itself. Considering the amount of different schlong projects involved it'd take a while just to save them with the new sliders too. I'd also probably add them to the 3BA versions first to be honest.

Edited April 5, 2023 by donnerwetter

[ShufflesLucario]

On 4/5/2023 at 1:48 PM, donnerwetter said:

 

I've actually looked into cribbing some sliders from UBE onto my schlongs, though you'd also need to add the sliders to the bodies meshes. From my tests, just making the seams look good would probably be a couple of evenings' work in itself. Considering the amount of different schlong projects involved it'd take a while just to save them with the new sliders too. I'd also probably add them to the 3BA versions first to be honest.

I mean honestly your addon is pretty perfect, i just wanted those saggy egg shaped balls tbh

[slash197]

The Nyl2balls is one of the easier drastic (ain't even gonna think about trying to copy things like the horse glans sliders) sliders to copy, but it still required a bunch of steps.

 

Had to export that slider from UBE, import it into the TRX project, use TRX's sliders to get the balls to overlap as much as possible, then make that the base shape and export the resulting TRX dick.  Imported that and the exported Nyl2balls into Blender, shrinkwrapped only the balls on the TRX dick to the Nyl2balls, cleaned up the result because it moved vertices at the texture seams. THEN exported that, and imported it back into the TRX project as a new slider.

[ShufflesLucario]

On 4/6/2023 at 6:47 PM, slash197 said:

The Nyl2balls is one of the easier drastic (ain't even gonna think about trying to copy things like the horse glans sliders) sliders to copy, but it still required a bunch of steps.

 

Had to export that slider from UBE, import it into the TRX project, use TRX's sliders to get the balls to overlap as much as possible, then make that the base shape and export the resulting TRX dick.  Imported that and the exported Nyl2balls into Blender, shrinkwrapped only the balls on the TRX dick to the Nyl2balls, cleaned up the result because it moved vertices at the texture seams. THEN exported that, and imported it back into the TRX project as a new slider.

eesh, no luck for me then

[DrDocture]

im not sure if im just DOING it wrong but like...how do i USE the addon

[slash197]

2 hours ago, DrDocture said:

im not sure if im just DOING it wrong but like...how do i USE the addon

 

You install the required mods and read their instruction, then install this.

[XD4RKPL4YERX]

the bodyslides you use in the screenshots are from your Nordic Leg Day Preset?

[slash197]

3 hours ago, XD4RKPL4YERX said:

the bodyslides you use in the screenshots are from your Nordic Leg Day Preset?

 

Yes.

[BigRick9]

I'm probably doing something dumb, but for some reason I can't get the PH zaps to work. All the other sliders seem to work fine but I always end up with the PH4 option. Any thoughts on what I might be doing wrong?

[slash197]

16 hours ago, RicoPico said:

I'm probably doing something dumb, but for some reason I can't get the PH zaps to work. All the other sliders seem to work fine but I always end up with the PH4 option. Any thoughts on what I might be doing wrong?

 

You should have check marks next to each of the hairs that you want to remove.

 

Is your Bodyslide the latest version?  Version mismatches between what was used to make a project and what is used to build the outfit can cause seemingly random problems.

[BigRick9]

7 hours ago, slash197 said:

 

You should have check marks next to each of the hairs that you want to remove.

 

Is your Bodyslide the latest version?  Version mismatches between what was used to make a project and what is used to build the outfit can cause seemingly random problems.

 

D'oh, I was being dumb. I was treating the boxes like they were additive instead of removing. Thanks for your help!

[voxik47679]

is it possible to have this as a stand alone version? using unique player + some followers using TBD while normal npcs are using cbbe. would be nice if the npcs could still use the original trx while having this one available for PC and followers in the mcm settings.

[slash197]

On 7/18/2023 at 8:39 PM, voxik47679 said:

is it possible to have this as a stand alone version? using unique player + some followers using TBD while normal npcs are using cbbe. would be nice if the npcs could still use the original trx while having this one available for PC and followers in the mcm settings.

 

That wouldn't be hard to do, just tedious.  Duplicating the Bodyslide files and pointing to a new meshes folder, making new textures folder, pointing the meshes to those textures, making a new esp. 

 

Maybe in a couple days.  I'm working on something that may or may not end up getting released.

[slash197]

On 7/18/2023 at 8:39 PM, voxik47679 said:

is it possible to have this as a stand alone version? using unique player + some followers using TBD while normal npcs are using cbbe. would be nice if the npcs could still use the original trx while having this one available for PC and followers in the mcm settings.

 

This file has now been uploaded, and should work fine.

 

The update notes have information.

[voxik47679]

1 hour ago, slash197 said:

 

This file has now been uploaded, and should work fine.

 

The update notes have information.

hell yeah. appreciate your hard work!