Rad Morphing Redux Helper

[jbezorg]

37 minutes ago, LenAnderson said:

 

Yeah. If I had known how bad MO2 messes up paths I would have probably added this at least as an option. I have never used MO2 so I cannot really help you a lot with troubleshooting. I would suggest looking at the helper's log file to see what paths the application expects and also check what path Windows reports for the running helper application and how all that fits with the location of the SliderCategories folder.

Is RMR Helper able to find the XMLs of other bodies? Then check if the XML for your osp file can be found there as well and if not make sure it appears there somehow...

If found this info if it's any help.

https://stepmodifications.org/wiki/Guide:Mod_Organizer/Advanced

 

[DarkSinfulMage]

Was working on a new set of morph sets for BT3 and FG.

Certain body-wide slider morphs don't seem to process when I'm using RMRHelper+bodyslide:

TigerSanBB, seveNBase Bombshell.

 

Back when I was using CBBE, it was the TorsoBig slider that didn't work.

 

A few feature requests/issues:

 

- The upper thresholds would be useful for setting for RADs intake. Being able to measure the highest amount of rads you would want to take in and spread the morph accordingly over that range would be really nice.

I'm fairly sure I can do it with morphs from SPECIAL, (1-25ish) but since the system is to be flexible with input types - being able to control all of these values will be important.

 

- Tooltips for everything would be good. Compile the knowledge or user examples of the thread into the program/documentation.

Will get a log for testing.

 

 

[SerSnuffles]

Sorry if this might be a simple fix, but RMR helper is stating that "MCM default setting file does not exist at E:\SteamLibrary\steamapps\common\Fallout 4\Data\MCM\Config\RadMorphingRedux\settings.ini"

i'm not quite sure how to fix this as i'm sort of new to modding in general. using vortex.

[vaultbait]

On 8/22/2023 at 2:47 AM, SerSnuffles said:

Sorry if this might be a simple fix, but RMR helper is stating that "MCM default setting file does not exist at E:\SteamLibrary\steamapps\common\Fallout 4\Data\MCM\Config\RadMorphingRedux\settings.ini"

i'm not quite sure how to fix this as i'm sort of new to modding in general. using vortex.

 

That is a file included in the Rad Morphing Redux mod. Did you install/enable Rad Morphing Redux and click the Deploy button in Vortex before trying to use RMR Helper?

[Koopstaknicca21]

wont work for me, it says 3 directories dont exist even though ive installed RMR and deployed

[Koopstaknicca21]

2023-09-26 19:10:42.703    adc98259-f769-466d-8df3-1e96bc8a4ff4    3398e23a-2b49-4c82-a0bf-57b6b86e715f    INFO    starting RmrHelper
2023-09-26 19:10:42.704    adc98259-f769-466d-8df3-1e96bc8a4ff4    ce76c28a-0780-43cf-b0d4-61d157234e6a    INFO    preparing dialogs
2023-09-26 19:10:42.784    adc98259-f769-466d-8df3-1e96bc8a4ff4    85186032-0bf6-4b7b-a32c-c923aaefc95f    INFO    loading body types
2023-09-26 19:10:42.786    adc98259-f769-466d-8df3-1e96bc8a4ff4    91d2e7d1-a467-4069-b056-9344799c45cb    INFO    BodyService.LoadBodyList: C:\Users\xxx\AppData\Roaming\Vortex\fallout4\mods\RmrHelper_v1.6.2(1)\Tools\BodySlide\SliderCategories
2023-09-26 19:10:42.786    adc98259-f769-466d-8df3-1e96bc8a4ff4    7de80ab3-7942-4a9e-a2f4-273279209929    WARN    directory does not exist: C:\Users\xxx\AppData\Roaming\Vortex\fallout4\mods\RmrHelper_v1.6.2(1)\Tools\BodySlide\SliderCategories

 

[LenAnderson]

On 9/26/2023 at 9:08 AM, Koopstaknicca21 said:

wont work for me, it says 3 directories dont exist even though ive installed RMR and deployed

 

On 9/26/2023 at 10:12 AM, Koopstaknicca21 said:

2023-09-26 19:10:42.703    adc98259-f769-466d-8df3-1e96bc8a4ff4    3398e23a-2b49-4c82-a0bf-57b6b86e715f    INFO    starting RmrHelper
2023-09-26 19:10:42.704    adc98259-f769-466d-8df3-1e96bc8a4ff4    ce76c28a-0780-43cf-b0d4-61d157234e6a    INFO    preparing dialogs
2023-09-26 19:10:42.784    adc98259-f769-466d-8df3-1e96bc8a4ff4    85186032-0bf6-4b7b-a32c-c923aaefc95f    INFO    loading body types
2023-09-26 19:10:42.786    adc98259-f769-466d-8df3-1e96bc8a4ff4    91d2e7d1-a467-4069-b056-9344799c45cb    INFO    BodyService.LoadBodyList: C:\Users\xxx\AppData\Roaming\Vortex\fallout4\mods\RmrHelper_v1.6.2(1)\Tools\BodySlide\SliderCategories
2023-09-26 19:10:42.786    adc98259-f769-466d-8df3-1e96bc8a4ff4    7de80ab3-7942-4a9e-a2f4-273279209929    WARN    directory does not exist: C:\Users\xxx\AppData\Roaming\Vortex\fallout4\mods\RmrHelper_v1.6.2(1)\Tools\BodySlide\SliderCategories

 

 

 

The path from your log suggests that you launched RMR Helper from Vortex's staging directory and not from the FO4 Data directory. That won't work as it won't be able to find BodySlide.

[Osoltwist]

I got everything connected between bodyslide and RMR helper. When I create slider sets it adjust the the preview at the 0 set and when I slide the value up the selected part gets smaller. Has anyone else seen this issue?

[Nuka Cherry]

20 hours ago, Osoltwist said:

I got everything connected between bodyslide and RMR helper. When I create slider sets it adjust the the preview at the 0 set and when I slide the value up the selected part gets smaller. Has anyone else seen this issue?

 

Some of the fusion girl slider set morphs act in reverse on my system, if that is what you mean. So larger is -1 and smaller is +1.

Edited February 12, 2024 by Nuka Cherry

[loopzoob]

Is there a way to manually add different sliders? I'm trying to see if i can use the ColdSteel Sliders with this Mod but I can't work out where to add the new sliders added by them

[loopzoob]

None of my slider's match up, Using CBBE Body and CBBE Curvy Body/Preset, and adding only Chubby Arms as a Slider Set causes Preg Belly Slider to change when editing the Trigger Value

[Whacked]

No need to respond, it is indeed FSM. Too bad the rear end is so light and bloomer-y, too distracting when in third person (in a wtf kind of way).

 

@LenAnderson Kind of off topic for the mod, and I did try searching this topic for answers but found none 😒. I would like to know which texture mod you are using in the bodyslide example of the mods functions. I have been unable to find a texture with decent tan lines, if I had to guess fsm? Thanks for any info.

Cheers

Edited May 2, 2024 by Whacked

[buttonpop]

The changes made in RMR Helper are not showing up on the MCM ingame. I have tried reloading MCM settings. The triggers I set in the tool are not affecting the game; the MCM just says "Select a trigger", with a blank dropdown menu. Morphs are not being applied ingame, either. I have made sure that the tool is generating a .ini file. The changes DO show up in the bodyslide preview window. My papyrus log is attached.

Also, I'm using TWB.

Papyrus.1.log

Edited May 16, 2024 by buttonpop

[buttonpop]

Just what is the issue with RMR Helper and TWB? It does not detect any of the sliders added by TWB and only works with native CBBE sliders. Why does RMR Helper use SliderCategories in the first place, instead of the actual sliderset files? I do not see any reason as to why RMR Helper shouldn't work with TWB.

Sorry if I'm coming off as asshole-y, I'm just at the end of my rope after trying to get this mod to work for several days.

[vaultbait]

9 hours ago, buttonpop said:

Just what is the issue with RMR Helper and TWB? It does not detect any of the sliders added by TWB and only works with native CBBE sliders. Why does RMR Helper use SliderCategories in the first place, instead of the actual sliderset files? I do not see any reason as to why RMR Helper shouldn't work with TWB.

Sorry if I'm coming off as asshole-y, I'm just at the end of my rope after trying to get this mod to work for several days.

 

The source code for RMR Helper is available (linked from the file page). Try to modify it to add TWB support and/or switch to using SliderSet instead of SliderCategory files. If you're interested in publishing an updated version, check with @LenAnderson on intended permissions for RMR Helper since the file page doesn't seem to say (he released RMR under very permissive terms, so probably intended the same for this).

Edited May 20, 2024 by vaultbait

[buttonpop]

6 hours ago, vaultbait said:

 

The source code for RMR Helper is available (linked from the file page). Try to modify it to add TWB support and/or switch to using SliderSet instead of SliderCategory files. If you're interested in publishing an updated version, check with @LenAnderson on intended permissions for RMR Helper since the file page doesn't seem to say (he released RMR under very permissive terms, so probably intended the same for this).

thanks for the pointers. i will make an attempt.

update: i now see that the mod is coded mainly in CS, which i know next to nothing about. this is not a job for me. (god i need to go back to school)

Edited May 20, 2024 by buttonpop

[khirasier]

On 5/20/2024 at 10:29 PM, vaultbait said:

 

The source code for RMR Helper is available (linked from the file page). Try to modify it to add TWB support and/or switch to using SliderSet instead of SliderCategory files. If you're interested in publishing an updated version, check with @LenAnderson on intended permissions for RMR Helper since the file page doesn't seem to say (he released RMR under very permissive terms, so probably intended the same for this).

ive been trying to do this but looking through the source files im having trouble looking for the call that decides where it gets the slider sets from so it will pull from sliderset instead of slidercategory. the function its calling is called getslidersets which i imagine is the one i have to edit but i cant find where the function library is in the source files. but looking at it i see no reason why it shouldnt be able to pull the slider data from the slider categories for twb anyway the slider categories are set up correctly for it to be able to pull the sliders from it anyway

 

Edited January 6, 2025 by khirasier

[MoBai636]

I'm using the latest bs, rmr, and rmr helper. When I start from mo2, nothing happens, not even the logs. I don't know why?