Giant Anal Beads SMP SSE

[Etherwind]

30 minutes ago, StritziPower said:

So i've now reinstalled XMPSSE, HDT-SMP and FSMP, that didnt do it. If reinstalled this mod, also didn't help. How would i go about the Nifskope solution, re-adding the physics.xml path? I've also tried Mod Organizer 2 that also didn't help.

 

Edit: i've now also re-added the physics.xml file to the mesh via Nifskope, with a tutorial here on LoversLab, but sadly that also didn't fix it. I might be cursed or something

Well, shit. I'm afraid I have no idea what's causing your issue then.

 

Just to make sure, you don't have both HDT-SMP and FSMP installed at the same time, right? FSMP is a replacement for the old HDT-SMP mod.

[StritziPower]

29 minutes ago, Etherwind said:

Well, shit. I'm afraid I have no idea what's causing your issue then.

 

Just to make sure, you don't have both HDT-SMP and FSMP installed at the same time, right? FSMP is a replacement for the old HDT-SMP mod.

I didn't know that would mess things up, but i uninstalled HDT-SMP but that also didn't fix it, i assume to install the mod and to be able to use it in game it's just drag and drop the files in the correct folders, like the original mod right?

[Etherwind]

14 minutes ago, StritziPower said:

I didn't know that would mess things up, but i uninstalled HDT-SMP but that also didn't fix it, i assume to install the mod and to be able to use it in game it's just drag and drop the files in the correct folders, like the original mod right?

You can automate mod installation with Mod Organizer 2, no need to manually drag and drop files into folders, if that's what you meant. Just download FSMP from Nexus through MO2 and install it with it. You can also drag and drop the Giant Anal Beads SSE .7z file into MO2 to install it with that too. It will automatically install it in the right place once you activate it.

 

Make sure you also have the requirements for XPMSSE just in case.

[StritziPower]

On 2/3/2023 at 6:39 PM, Etherwind said:

You can automate mod installation with Mod Organizer 2, no need to manually drag and drop files into folders, if that's what you meant. Just download FSMP from Nexus through MO2 and install it with it. You can also drag and drop the Giant Anal Beads SSE .7z file into MO2 to install it with that too. It will automatically install it in the right place once you activate it.

 

Make sure you also have the requirements for XPMSSE just in case.

Sorry for the late reply, but every mod that uses smp has this problem, with which settings did you install xmpsse and fsmp? i think i choose a wrong option somehwere in the installer of one. Or could it maybe be a compatibility issue with CBPC?

[Electricdive]

This is great, thank you!

[Etherwind]

11 hours ago, StritziPower said:

Sorry for the late reply, but every mod that uses smp has this problem, with which settings did you install xmpsse and fsmp? i think i choose a wrong option somehwere in the installer of one. Or could it maybe be a compatibility issue with CBPC?

Hopefully I can remember everything from the top of my head, because I don't have Skyrim or anything related installed at the moment. I don't remember every individual check when installing something like FSMP or 3BA, but there should be guidance in the installers or a readme or the description in the mod pages if you're unsure of something.

 

Here's what I use and should be the bare minimum you need, including SMP, XPMSSE and their requirements:

 

SKSE

Mod Organizer 2

XP32 Maximum Skeleton Special Extended - XPMSSE

Fores New Idles in Skyrim SE - FNIS SE

RaceMenu

FSMP - Faster HDT-SMP

Caliente's Beautiful Bodies Enhancer -CBBE- (if using CBBE)

CBBE 3BA (3BBB) (if using CBBE)

PapyrusUtil SE - Modders Scripting Utility Functions

BodySlide and Outfit Studio

(Optional if you want to use with 3BA) CBPC - Physics with Collisions for SSE and VR

(Technically optional, but highly recommended, especially if you use a lot of mods) LOOT

 

I don't use UNP, so I can't help with installing that, if you were planning on using that. CBBE is what I use.

 

I also don't use Vortex, so I can't help with that either if you were still planning to use it instead of Mod Organizer 2. I would highly recommend using MO2.

 

Download everything through Mod Organizer 2 or drag and drop your files into it for easier and simpler installation, with the exception of SKSE and LOOT. LOOT has its own installer and you drag and drop SKSE's files into your Skyrim folder. It will automatically install everything in the right directory. If something doesn't look right, like what you'll encounter when trying to install FNIS for example, it'll open up a window that lets you drag and adjust the file structure until it looks right. It will tell you when everything looks okay.

 

You need to launch FNIS, BodySlide, LOOT and SKSE through Mod Organizer 2. You can add shortcuts for FNIS, LOOT and BodySlide in the dropdown menu in the top right. SKSE should have one automatically after you've dragged and dropped its files into your Skyrim directory. If the shortcut hasn't shown up, restart Mod Organizer 2.

 

In BodySlide, check "Build morphs" in the lower left corner. After that, press "Batch Build" if you just want to get everything working, or go individually through your bodies and/or outfits and press "Build" on each. Remember to pick 3BBB Advanced when asked for when building. Your naked body should now have physics and morphs in game. You need to get armour mods with 3BA support if you want morphs and jiggles on your armour pieces, but I'll leave that up to you. You can also get ready made presets if you want to change how your body looks or you can fiddle with the sliders yourself, but again, I'll leave that up to you.

 

When running FNIS, remember to check the skeleton arm fix. You can download FNIS Behavior SE 7_6 XXL instead of the regular if you want more animation slots, if you're planning to use SexLab or something. If you are, remember to check the gender specific animations box, too.

 

CBPC isn't 100% necessary, but I believe it's lighter on your computer compared to SMP when using with 3BA. There are specific steps for it when installing 3BA, but if you want to skip all that, you don't need CBPC.

 

Remember to enable any .esps the mods might've added. Launch LOOT and let it adjust your load order before launching SKSE.

 

With that, you should hopefully have physics in game. There's a chance I might've forgotten a step or two somewhere, but this wall of text should guide you towards the right path at least. Modding is a bit finicky, but it becomes easier once you start figuring out how everything works.

Edited February 5, 2023 by Etherwind

[StritziPower]

4 hours ago, Etherwind said:

Hopefully I can remember everything from the top of my head, because I don't have Skyrim or anything related installed at the moment. I don't remember every individual check when installing something like FSMP or 3BA, but there should be guidance in the installers or a readme or the description in the mod pages if you're unsure of something.

 

Here's what I use and should be the bare minimum you need, including SMP, XPMSSE and their requirements:

 

SKSE

Mod Organizer 2

XP32 Maximum Skeleton Special Extended - XPMSSE

Fores New Idles in Skyrim SE - FNIS SE

RaceMenu

FSMP - Faster HDT-SMP

Caliente's Beautiful Bodies Enhancer -CBBE- (if using CBBE)

CBBE 3BA (3BBB) (if using CBBE)

PapyrusUtil SE - Modders Scripting Utility Functions

BodySlide and Outfit Studio

(Optional if you want to use with 3BA) CBPC - Physics with Collisions for SSE and VR

(Technically optional, but highly recommended, especially if you use a lot of mods) LOOT

 

I don't use UNP, so I can't help with installing that, if you were planning on using that. CBBE is what I use.

 

I also don't use Vortex, so I can't help with that either if you were still planning to use it instead of Mod Organizer 2. I would highly recommend using MO2.

 

Download everything through Mod Organizer 2 or drag and drop your files into it for easier and simpler installation, with the exception of SKSE and LOOT. LOOT has its own installer and you drag and drop SKSE's files into your Skyrim folder. It will automatically install everything in the right directory. If something doesn't look right, like what you'll encounter when trying to install FNIS for example, it'll open up a window that lets you drag and adjust the file structure until it looks right. It will tell you when everything looks okay.

 

You need to launch FNIS, BodySlide, LOOT and SKSE through Mod Organizer 2. You can add shortcuts for FNIS, LOOT and BodySlide in the dropdown menu in the top right. SKSE should have one automatically after you've dragged and dropped its files into your Skyrim directory. If the shortcut hasn't shown up, restart Mod Organizer 2.

 

In BodySlide, check "Build morphs" in the lower left corner. After that, press "Batch Build" if you just want to get everything working, or go individually through your bodies and/or outfits and press "Build" on each. Remember to pick 3BBB Advanced when asked for when building. Your naked body should now have physics and morphs in game. You need to get armour mods with 3BA support if you want morphs and jiggles on your armour pieces, but I'll leave that up to you. You can also get ready made presets if you want to change how your body looks or you can fiddle with the sliders yourself, but again, I'll leave that up to you.

 

When running FNIS, remember to check the skeleton arm fix. You can download FNIS Behavior SE 7_6 XXL instead of the regular if you want more animation slots, if you're planning to use SexLab or something. If you are, remember to check the gender specific animations box, too.

 

CBPC isn't 100% necessary, but I believe it's lighter on your computer compared to SMP when using with 3BA. There are specific steps for it when installing 3BA, but if you want to skip all that, you don't need CBPC.

 

Remember to enable any .esps the mods might've added. Launch LOOT and let it adjust your load order before launching SKSE.

 

With that, you should hopefully have physics in game. There's a chance I might've forgotten a step or two somewhere, but this wall of text should guide you towards the right path at least. Modding is a bit finicky, but it becomes easier once you start figuring out how everything works.

Thank you so much for the all the help and this guide, i hope this wil get the physics working.

[h2639643186]

Can you make a version of fallout 4，please

[h2639643186]

I really like this one，Can you make a version of fallout 4，please

[ebbluminous]

8 hours ago, h2639643186 said:

I really like this one，Can you make a version of fallout 4，please

Nice of you to assume that they make FO4 mods...

[Etherwind]

On 2/19/2024 at 10:14 AM, h2639643186 said:

Can you make a version of fallout 4，please

 

On 2/19/2024 at 10:16 AM, h2639643186 said:

I really like this one，Can you make a version of fallout 4，please

 

No, I don't play Fallout 4. Shouldn't be too hard to port it yourself.

[belegost]

Just FYI I liked them so much I made a devious version, available now in downloads section. This is a simple esp edit, giving them iron anal plug functionality. Also made them craftable. No assets were included and your mod is a requirement.

Thank you for taking your time to bring these to SSE in the first place.

Edited September 7, 2024 by belegost

[Etherwind]

On 9/7/2024 at 9:00 PM, belegost said:

Just FYI I liked them so much I made a devious version, available now in downloads section. This is a simple esp edit, giving them iron anal plug functionality. Also made them craftable. No assets were included and your mod is a requirement.

Thank you for taking your time to bring these to SSE in the first place.

Thank you for adding DD support! I'll add a link to your mod on the first post as well.