Jump to content

SexLab Framework 1.63. Have trouble with first hurdle.


Recommended Posts

Posted

Let me begin with I am kind of an amateur when it comes to this level of moding. I’ll try not to waste your time so I did some troubleshooting first. I’m having a big problem trying to get SexLab Framework to work with Skyrim SE (Anniversary Edition).

I have successfully loaded SKSE 2.1.2, XP32 Maximum Skeleton, SkyUI, FNIS Idles, FNIS Creatures and FNIS Spells into my game using Mod Organizer 2.4.2. There are no errors or warnings when I run the GenerateFNISforUsers executable, so I think I’m good there. It looks like I meet all of the requirements.

What I can’t seem to get to work is the new SexLabFrameworkSE 1.63. And I see an error that states “Outdated of missing “SexLabUtil” SKSE plugin detected”. I removed and reinstalled the mod from Mod Organizer several times but I receive the same results.

According to Mod Organizer; the SexLabUtil.dll file is in the correct plugins folder. I made the change to the Skyrim.ini file to get the Papyrus log but no log file shows under the folder. I doubled checked to make sure I made the change and it did modified it correctly.

A ran LOOT and cleaned up all of my dirty files. Its not showing any more errors so I’m at a loss there. The game runs fine but it refuses to accept SexLabFramework. I hope I covered enough for you guys to point me in the right direction. Thanks for your help with this.

Framework.png

INI File.png

Log File.png

Posted

I'm having this exact issue. I have tried fresh reinstalls of everything. I would sincerely like an answer to this too. Even using the 1.64 update i still get this message every time I load to try and install it and no one else anywhere has had the issue recently with the new problems arising with AE and SKSE. I'm using NMM and even when checking my data folders the file is exactly where it is supposed to be.

Posted

Hello,

I looks like for me the solution was to use SexLab Framework 1.64. At the time I was troubleshooting the issue only 1.63 was available.

I uninstalled 1.63 with Mod Organizer 2 and installed 1.64. I ran LOOT and the GenerateFNISforUsers afterwards. Now it SexLab Framework is functioning. I can share my load order if anyone needs additional help. 

Thanks.

Posted
1 hour ago, AshKnight said:

Hello,

I looks like for me the solution was to use SexLab Framework 1.64. At the time I was troubleshooting the issue only 1.63 was available.

I uninstalled 1.63 with Mod Organizer 2 and installed 1.64. I ran LOOT and the GenerateFNISforUsers afterwards. Now it SexLab Framework is functioning. I can share my load order if anyone needs additional help. 

Thanks.

I'm having the issue with 1.64, I'm using vortex though maybe that has something to do with it, or my load order or both? I'm still kinda new to this modded Skyrim thing.

Posted
4 hours ago, Casey96 said:

I'm having the issue with 1.64, I'm using vortex though maybe that has something to do with it, or my load order or both? I'm still kinda new to this modded Skyrim thing.

I'm also having issues with 1.64 and using vortex. So possibly a common denominator?

Posted

I'm new to this, just like you, so I'm not quite sure. But, you might be right since I am not using Vortex.


Ha, Skyrim AE just updated in the background. Now the Skyrim script extender no longer works. Looks like I'm dead in the water until the script extender gets updated.

Posted
1 hour ago, AshKnight said:

I'm new to this, just like you, so I'm not quite sure. But, you might be right since I am not using Vortex.


Ha, Skyrim AE just updated in the background. Now the Skyrim script extender no longer works. Looks like I'm dead in the water until the script extender gets updated.

can I ask what mod manager you use instead of Vortex?
Also there's a preliminary version of the script extender for the AE 

Posted

I'm using Mod Organizer 2 that I got from the Nexus page: https://www.nexusmods.com/skyrimspecialedition/mods/6194 I like this mod manager because it has a tutorial that walks beginners (like me) through the installation and troubleshooting process.

I was using the latest version of Skyrim Script Extender and it was working well until Steam updated my game earlier this afternoon. Now I'm stuck until a new version is created.

 

 

SKSE.JPG

Posted
31 minutes ago, AshKnight said:

I'm using Mod Organizer 2 that I got from the Nexus page: https://www.nexusmods.com/skyrimspecialedition/mods/6194 I like this mod manager because it has a tutorial that walks beginners (like me) through the installation and troubleshooting process.

I was using the latest version of Skyrim Script Extender and it was working well until Steam updated my game earlier this afternoon. Now I'm stuck until a new version is created.

 

 

SKSE.JPG

okay I'll check out Mod Organizer 2 then thanks
oh damn, I didn't realize there had been another updated, I played yesterday and SKSE worked fine, hopefully there'll be an update soon

Posted
23 hours ago, AshKnight said:

I'm using Mod Organizer 2 that I got from the Nexus page: https://www.nexusmods.com/skyrimspecialedition/mods/6194 I like this mod manager because it has a tutorial that walks beginners (like me) through the installation and troubleshooting process.

I was using the latest version of Skyrim Script Extender and it was working well until Steam updated my game earlier this afternoon. Now I'm stuck until a new version is created.

 

 

SKSE.JPG

I switched to Mod Organizer 2 but I'm still getting the same issue with SexLabs as I did with Vortex

Posted

Yes.  I'm running Vortex with SexLabFramework164b, SKSE64 2,1,3, FNIS 7.6, and Skyui 5.2... so the game is running but I'm getting msgs from skyui as follows:

Skyui Error Code 1

SKSE64 not running ....

wait until SKSE64 is updated then install new version

 

Then I get another popup from RaceMenu

"You are running SKSE ver 0.0.0.0 expected 2.0.7.56 or greater....reinstall SKSE scripts

NiOverride plugin not detected various features may be unavailable

Error codes (0) (1) (2)"

 

The last message sums it up.  Amorous Adventures runs but the MCM menu is not there?  So options appear to be all default?  aka no action!!

FNIS also is not seeing the animations, thus not doing its thing to get "actions" working.

 

So looks like we are all in "hold mode" until Bethesda, SKSE, and SkyUI get in sync??

Posted

Yes.  I'm running Vortex with SexLabFramework164b, SKSE64 2,1,3, FNIS 7.6, and Skyui 5.2... so the game is running but I'm getting msgs from skyui as follows:

Skyui Error Code 1

SKSE64 not running ....

wait until SKSE64 is updated then install new version

 

Then I get another popup from RaceMenu

"You are running SKSE ver 0.0.0.0 expected 2.0.7.56 or greater....reinstall SKSE scripts

NiOverride plugin not detected various features may be unavailable

Error codes (0) (1) (2)"

 

The last message sums it up.  Amorous Adventures runs but the MCM menu is not there?  So options appear to be all default?  aka no action!!

FNIS also is not seeing the animations, thus not doing its thing to get "actions" working.

 

So looks like we are all in "hold mode" until Bethesda, SKSE, and SkyUI get in sync??

 

Update.....Got it working!! Ha!

So I double checked FNIS, and it was not running from the correct folder....fixed that in Vortex so it will stay fixed

Then I started the game using skse64_loader.exe  rather than SkyrimSE.exe  ...  fixed that in Vortex as well.

All good for now...just hoping Bethesda doesn't help us out with another update!

 

Posted

I appreciate the update, ArchFinder.

What worked for you may work for others. Now the community has another resource to check. Good show.

Posted
On 11/25/2021 at 6:58 PM, AshKnight said:

Well, good news is that SexLab Framework 1.64b just released. Replace that and give it a shot.

so I just tried with the new version and I still get the same message even tho the file is where it's supposed to be

 

Posted

I'm getting the same error, ("Outdated or missing "SexLabUtil" SKSE Plugin detected") I'm also pretty new to modding and I have no idea why this isn't working. I'm using Vortex, I have all the required mods and I'm using SexLab Framework 1.64b with an updated version of Skyrim AE. I have no clue what more to do, I ran LOOT several times and everything seems to be in order. I'm out of ideas, would love some help. Thanks!

Posted
On 11/27/2021 at 12:58 PM, ArchFinder said:

Yes.  I'm running Vortex with SexLabFramework164b, SKSE64 2,1,3, FNIS 7.6, and Skyui 5.2... so the game is running but I'm getting msgs from skyui as follows:

Skyui Error Code 1

SKSE64 not running ....

wait until SKSE64 is updated then install new version

 

Then I get another popup from RaceMenu

"You are running SKSE ver 0.0.0.0 expected 2.0.7.56 or greater....reinstall SKSE scripts

NiOverride plugin not detected various features may be unavailable

Error codes (0) (1) (2)"

 

The last message sums it up.  Amorous Adventures runs but the MCM menu is not there?  So options appear to be all default?  aka no action!!

FNIS also is not seeing the animations, thus not doing its thing to get "actions" working.

 

So looks like we are all in "hold mode" until Bethesda, SKSE, and SkyUI get in sync??

 

Update.....Got it working!! Ha!

So I double checked FNIS, and it was not running from the correct folder....fixed that in Vortex so it will stay fixed

Then I started the game using skse64_loader.exe  rather than SkyrimSE.exe  ...  fixed that in Vortex as well.

All good for now...just hoping Bethesda doesn't help us out with another update!

 

What exactly was it that you did that fixed it?

  • 3 weeks later...
Posted
On 12/13/2021 at 3:40 AM, ArgonianBard117 said:

What exactly was it that you did that fixed it?

I'm wondering this too bc I'm having the same issue still and I get a similar message with PapyrusUtil

  • 2 weeks later...
Posted

Im not sure if it will work for you.

I have the Latest SSE Build, Sexlab was giving me the same DLL error and i had no idea.
I started playing around with The files and Decided to Try The Sexlab v1.64c (AE)
Heck you would think that it would work because it is Anniversary Edition But turns out it works perfect with the latest SSE
(Here is the link)


Download v1.64c Delete v1.63 And Hopefully It will work. 

Let me know if it does!

Posted
58 minutes ago, Damyn said:

Heck you would think that it would work because it is Anniversary Edition But turns out it works perfect with the latest SSE

 

Because the latest SE build IS the AE build.

 

If you're Special Edition is updated, you ARE using Anniversary Edition. They are the same thing. 

 

Being on the AE version has nothing to do with buying the new DLC on steam. AE is any version of SE past runtime 1.6.

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...