How to properly configure SLIF for CBBE 3BA

[Player80]

I don't know why but I just have too many inconsistencies on a new modlist.

 

I'm using the "Slif bodymorph setting" for CBBE 3BBB. I have tried both the version as is and with some slight edits.

I have disabled NiOverride entirely, I'm only using the "percentages" with the "steps".

I'm using the default modus, instant inflation, Top X of 3.

 

• Fill her up Baka Edition (1.552V) seems to manage the belly node on its own, even though it still registers within slif. Setting all the belly percentages to 0% and reloading everything doesn't revert the belly back to what it normally looks like
• I've set both Estrus Chaurus and Hentai Pregnancy 's maximum sliders to 10 for the breast node. HP seems to work, but EC's growth is negligible
• Sexlab Survival 's mystery potion seems to inflate some sliders I have set to 0%

 

Would anyone be able to give me some advice on how to properly setup SLIF? What settings do you use on the config page, the toggle page, the values and slider page, the preset page and lastly the bodymorphs page?

[QuesterSFM]

I think way too late, but did you manage to solve the issue?

[safado]

The title is a statement, not a question.

 

Necroing this to make it rest in peace. ?

Hopefully

 

You do not choose what "modus" is used, the mod sending events to SLIF is the one choosing.  In FillHerUp-baka enabling "bodymorphs" will use "morph modus" with the default being "PregnancyBelly", with "bodymorph" disabled it will use "default modus" and your settings set the "look".  If you change "Bodymorph" enabled settings and the mod is already registered, you need to unregister "FillHerUp" in SLIF from the modus you disabled in the mod.  NEcesary to clear the old values for the morphs and let it update in the preferred modus selected in the FillHerUp MCM,

 

Last time I checked, "Estrus Chaurus" was limited to size 3 for breast nodes and glutes, while belly can reach 6. The settings are in the "Skeleton Check" page of the MCM.  You may be changing something else.

 

Sexlab Survival uses "Morph Modus" for the inflation potion, you can set the size but not the morphs used.  It will use "Default modus" for Needs belly scaling for hunger.  The potion inflation use hard-coded morphs with the names "BreastsFantasy", "BreastsSmall"(reversed value), "BreastPerkiness", "NippleLength", "BreastsSSH", and "DoubleMelon".

       
 

You may not know that SLIF "Morph Modus" bypass "Default Modus" settings and is instead setup at the mod sending the morphs, if that mod's author let you.  That what happening with SL survival and maybe your setup for FillHerup.

 

Now R.I.P. ?

Edited January 20, 2023 by safado

[Watson152]

On 1/19/2023 at 4:36 PM, safado said:

The title is a statement, not a question.

 

Necroing this to make it rest in peace. ?

Hopefully

 

You do not choose what "modus" is used, the mod sending events to SLIF is the one choosing.  In FillHerUp-baka enabling "bodymorphs" will use "morph modus" with the default being "PregnancyBelly", with "bodymorph" disabled it will use "default modus" and your settings set the "look".  If you change "Bodymorph" enabled settings and the mod is already registered, you need to unregister "FillHerUp" in SLIF from the modus you disabled in the mod.  NEcesary to clear the old values for the morphs and let it update in the preferred modus selected in the FillHerUp MCM,

 

Last time I checked, "Estrus Chaurus" was limited to size 3 for breast nodes and glutes, while belly can reach 6. The settings are in the "Skeleton Check" page of the MCM.  You may be changing something else.

 

Sexlab Survival uses "Morph Modus" for the inflation potion, you can set the size but not the morphs used.  It will use "Default modus" for Needs belly scaling for hunger.  The potion inflation use hard-coded morphs with the names "BreastsFantasy", "BreastsSmall"(reversed value), "BreastPerkiness", "NippleLength", "BreastsSSH", and "DoubleMelon".

       
 

You may not know that SLIF "Morph Modus" bypass "Default Modus" settings and is instead setup at the mod sending the morphs, if that mod's author let you.  That what happening with SL survival and maybe your setup for FillHerup.

 

Now R.I.P. ?

You seem very wise, can you walk me throug hwhy a mod wouldn't register in SLIF? I've been trying to get inflation stuff to work for breasts on both BoS and MME to no avail

[astor2015]

On 9/29/2024 at 4:56 AM, Watson152 said:

You seem very wise, can you walk me throug hwhy a mod wouldn't register in SLIF? I've been trying to get inflation stuff to work for breasts on both BoS and MME to no avail

MMe should be registered automaticaly, bos uses its own morphs system that can be easily edited with the json files included on the mod. 

[safado]

On 9/29/2024 at 3:56 AM, Watson152 said:

You seem very wise, can you walk me throug hwhy a mod wouldn't register in SLIF? I've been trying to get inflation stuff to work for breasts on both BoS and MME to no avail

 

There was a Bodymorph (bypass SLIF) fix somewhere and an old SLIF patch, but this works better with SLIF.  It is an add-on for MME that adds extra MCM with configurable bodymorphs using SLIF. If configured in its json files can be used for any playable body type with bodyslide files available. Give a like to @wm46 if it solves it for you.  Read the instructions, quick-start for 3BAv2 go the MCM\external load-save\load defaults.

Here is another good SLIF "patch", but for morphology.

 

Another community patch for MME when using it with POP.

Edited October 25, 2024 by safado

[Straeker]

@safado pardon the necro, but I'm wondering if you have any insight. I have mods that use the default modus and are registering properly in there, but slif isn't calculating morphs from the node values. I followed the tullius/3ba setup guide (which used to work for me perfectly), but i am still only seeing node/bone inflation, not the morphs determined from my set percentages. Any idea what might be "blocking" the calculation from node to morph? I couldn't find anything in my slif debug log, which i'll attach. Hannah is the PC's name.

slif_debug.0.log