SylvianGreymyst Posted June 27, 2020 Posted June 27, 2020 So, I just reinstalled Skyrim Special Edition, and went to go play it, but apparently none of the animations are working. Everything works in the game, except the animations. All the spells and stuff work fine, matchmaker will give the the whole "Actor has an irresistible aura about them" message for both my character and the NPCs, but nothing happens. No animation starts, and the npcs just go on with their day. That goes for creatures too. I've gone through all the troubleshooting steps, but I will admit I am not the most code or tech savy person in the world, so I very well might've missed something, so I've come here to ask for help. Now, best I can see this might be the problem? But I am not sure. Quote [06/26/2020 - 06:34:23PM] ERROR: Static function PushActor not found on object vinutil. Aborting call and returning None stack: [alias PlayerRef on quest SexLabMatchMaker (14000D62)].sslmatchmaker.RegisterActor() - "sslMatchMaker.psc" Line 57 [Active effect 4 on (180099BF)].sslMatchMakerMagicEffect.OnEffectStart() - "sslMatchMakerMagicEffect.psc" Line 11 [06/26/2020 - 06:34:24PM] SEXLAB - NOTICE: ValidateActor(Thunder) -- TRUE -- HIT [06/26/2020 - 06:34:24PM] ERROR: Static function PushActor not found on object vinutil. Aborting call and returning None stack: [alias PlayerRef on quest SexLabMatchMaker (14000D62)].sslmatchmaker.RegisterActor() - "sslMatchMaker.psc" Line 57 [Active effect 5 on (180099BB)].sslMatchMakerMagicEffect.OnEffectStart() - "sslMatchMakerMagicEffect.psc" Line 11 [06/26/2020 - 06:34:35PM] SEXLAB - NOTICE: ValidateActor(Buck) -- TRUE -- HIT [06/26/2020 - 06:34:35PM] ERROR: Static function PushActor not found on object vinutil. Aborting call and returning None stack: [alias PlayerRef on quest SexLabMatchMaker (14000D62)].sslmatchmaker.RegisterActor() - "sslMatchMaker.psc" Line 57 [Active effect 4 on (180099BD)].sslMatchMakerMagicEffect.OnEffectStart() - "sslMatchMakerMagicEffect.psc" Line 11 [06/26/2020 - 06:34:38PM] SEXLAB - NOTICE: ValidateActor(Horse guy) -- TRUE -- HIT [06/26/2020 - 06:34:38PM] ERROR: Static function PushActor not found on object vinutil. Aborting call and returning None stack: [alias PlayerRef on quest SexLabMatchMaker (14000D62)].sslmatchmaker.RegisterActor() - "sslMatchMaker.psc" Line 57 [Active effect 3 on (00000014)].sslMatchMakerMagicEffect.OnEffectStart() - "sslMatchMakerMagicEffect.psc" Line 11 [06/26/2020 - 06:35:08PM] VM is freezing... [06/26/2020 - 06:35:08PM] VM is frozen [06/26/2020 - 06:35:09PM] Log closed That was at the end of my papyrus log, which I checked after SL's debug log showed no errors. Quote [06/26/2020 - 06:31:01PM] SexLabDebug log opened (PC) [06/26/2020 - 06:31:01PM] NOTICE: ValidateActor(Horse guy) -- TRUE -- MISS [06/26/2020 - 06:31:02PM] NOTICE: ValidateActor(Shahira) -- TRUE -- MISS [06/26/2020 - 06:31:22PM] SexLab Debug/Development Mode Deactivated [06/26/2020 - 06:31:22PM] Config Reloading... [06/26/2020 - 06:31:27PM] AnimCache: Cleared! [06/26/2020 - 06:31:43PM] RegisterSlots() Creature: Creatures not enabled, skipping registration. [06/26/2020 - 06:31:45PM] Thread[14] Setup - [sslthreadcontroller <SexLabThread14 (0706C638)>] [06/26/2020 - 06:31:45PM] Thread[13] Setup - [sslthreadcontroller <SexLabThread13 (0706C637)>] [06/26/2020 - 06:31:45PM] Thread[12] Setup - [sslthreadcontroller <SexLabThread12 (0706C636)>] [06/26/2020 - 06:31:46PM] Thread[11] Setup - [sslthreadcontroller <SexLabThread11 (0706C635)>] [06/26/2020 - 06:31:46PM] Thread[10] Setup - [sslthreadcontroller <SexLabThread10 (0706C634)>] [06/26/2020 - 06:31:46PM] Thread[9] Setup - [sslthreadcontroller <SexLabThread09 (0706C633)>] [06/26/2020 - 06:31:47PM] Thread[8] Setup - [sslthreadcontroller <SexLabThread08 (0706C632)>] [06/26/2020 - 06:31:47PM] Resizing animation registry slots: 128 -> 160 [06/26/2020 - 06:31:47PM] Thread[7] Setup - [sslthreadcontroller <SexLabThread07 (0706C631)>] [06/26/2020 - 06:31:47PM] Thread[6] Setup - [sslthreadcontroller <SexLabThread06 (0706C630)>] [06/26/2020 - 06:31:48PM] Thread[5] Setup - [sslthreadcontroller <SexLabThread05 (0706C62F)>] [06/26/2020 - 06:31:48PM] Thread[4] Setup - [sslthreadcontroller <SexLabThread04 (0706C62E)>] [06/26/2020 - 06:31:48PM] Thread[3] Setup - [sslthreadcontroller <SexLabThread03 (0706C62D)>] [06/26/2020 - 06:31:49PM] Thread[2] Setup - [sslthreadcontroller <SexLabThread02 (0706C62C)>] [06/26/2020 - 06:31:49PM] Thread[1] Setup - [sslthreadcontroller <SexLabThread01 (07062452)>] [06/26/2020 - 06:31:49PM] Thread[0] Setup - [sslthreadcontroller <SexLabThread00 (07061EEF)>] [06/26/2020 - 06:31:58PM] NOTICE: ValidateActor(Horse guy) -- TRUE -- MISS [06/26/2020 - 06:31:59PM] NOTICE: ValidateActor(Buck) -- TRUE -- MISS [06/26/2020 - 06:32:07PM] NOTICE: ValidateActor(Moonbeam) -- TRUE -- MISS [06/26/2020 - 06:32:18PM] NOTICE: ValidateActor(Moonbeam) -- TRUE -- HIT [06/26/2020 - 06:32:18PM] Resizing animation registry slots: 160 -> 192 [06/26/2020 - 06:32:19PM] NOTICE: ValidateActor(Thunder) -- TRUE -- MISS [06/26/2020 - 06:32:26PM] Resizing animation registry slots: 192 -> 224 [06/26/2020 - 06:32:35PM] Resizing animation registry slots: 224 -> 256 [06/26/2020 - 06:32:46PM] Resizing animation registry slots: 256 -> 288 [06/26/2020 - 06:32:57PM] Resizing animation registry slots: 288 -> 320 [06/26/2020 - 06:33:06PM] Resizing animation registry slots: 320 -> 352 [06/26/2020 - 06:33:17PM] Resizing animation registry slots: 352 -> 384 [06/26/2020 - 06:33:28PM] Resizing animation registry slots: 384 -> 416 [06/26/2020 - 06:33:39PM] Resizing animation registry slots: 416 -> 448 [06/26/2020 - 06:33:48PM] Resizing animation registry slots: 448 -> 480 [06/26/2020 - 06:34:23PM] NOTICE: ValidateActor(Moonbeam) -- TRUE -- HIT [06/26/2020 - 06:34:24PM] NOTICE: ValidateActor(Thunder) -- TRUE -- HIT [06/26/2020 - 06:34:35PM] NOTICE: ValidateActor(Buck) -- TRUE -- HIT [06/26/2020 - 06:34:38PM] NOTICE: ValidateActor(Horse guy) -- TRUE -- HIT [06/26/2020 - 06:35:09PM] Log closed Typically, all the SL debug log shows when I look at it is the "ValidatingActor(Name) -- True -- Hit" and that's it for an entire log usually. I'll upload both the latest SL debug log and the full Papyrus Log here too, just incase I missed something. Any help anyone can give is much appreciated, most likely I did something stupid, but I honestly don't know what so please don't be too harsh? SexLabDebug.0.log Papyrus.0.log
coolfreaky Posted June 27, 2020 Posted June 27, 2020 can you provide the FNIS log output for any skeleton or animation error . Load Order could help to see what is installed . sexlab debag says you have not enabled creature ! in game press ESCAP selec Mod Configuration ( MCM ) and enable Creatures you need to look if creatures are allowed in aroused creatures and if you use SL animation loader you need to register your animations Spoiler Spoiler
SylvianGreymyst Posted June 27, 2020 Author Posted June 27, 2020 FNIS log output Quote FNIS Behavior V7.6 6/26/2020 10:55:40 PM Skyrim SE 64bit: 1.5.97.0 - C:\Program Files (x86)\Steam\steamapps\common\Skyrim Special Edition\ (Steam) Skeleton(hkx) female: XPMS2HDT (126 bones) male: XPMS2HDT (126 bones) Patch: "GENDER Specific Animations" Patch: "SKELETON Arm Fix" Reading Billyy_Creature V1.0 ... Reading Billyy_CreatureBeasts V1.0 ... Reading Billyy_CreatureConstructs V1.0 ... Reading Billyy_CreatureFurniture V1.0 ... Reading Billyy_CreatureHumanoids V1.0 ... Reading Billyy_CreatureInsects V1.0 ... Reading Billyy_CreatureMisc V1.0 ... Reading Defeat V5 ... Reading FNISBase V7.6 ... Reading FNISCreatureVersion V7.0 ... Reading FNISSpells V5.0.1 ... Reading HCOSBestiality V1.0 ... Reading HCOSVore V1.0 ... Reading MoreNastyCritters V1.0 ... Reading SexLab V1.63 ... Reading SexLabAP V1.63 ... Reading SexLabAroused V2.9 ... Reading SexLabCreature V1.63 ... Reading SRBCreatures V1.0 ... Reading XPMSE V7.2 ... All Anim Lists scanned. Generating Behavior Files... No GENDER directory male No GENDER directory female Alternate Animation mods: 1 sets: 16 total groups: 30 added file slots: 170 alternate files: 164 Create Creature Behaviors ... Reading Billyy_CreatureConstructs V1.0 ... Reading HCOSWildlife V1.0 ... Reading MoreNastyCritters V1.0 ... Reading Billyy_Creature V1.0 ... Reading Billyy_CreatureBeasts V1.0 ... Reading HCOSBestiality V1.0 ... Reading SexLabCreature V1.63 ... Reading Billyy_CreatureHumanoids V1.0 ... Reading Billyy_CreatureFurniture V1.0 ... Reading Billyy_CreatureInsects V1.0 ... Reading Billyy_CreatureMisc V1.0 ... Reading HCOSVore V1.0 ... Reading SRBCreatures V1.0 ... 3544 animations for 20 mods successfully included (character) 4483 animations for 13 mods and 45 creatures successfully included. As for my load order: Quote 00 Skyrim 01 Dawnguard 02 Hearthfires 03 Dragonborn 04 Unoffical Skyrim Special Edition Patch 05 Campire 06 Race Compatibility 07 Lykaios Race 08 Sexlab 0a Creature Framework 0b Sexlab Aroused 0c Underground Bathhouse 0d Baddog Schlongs core 0e Schlongs of Skyrim - Core 0f SkyUI_SE FE 000 Hairs Beast Race - Extended Plus 10 SOS Race Menu 11 FNIS 12 Hunting in Skyrim 13 More Nasty Critters 14 Sexlab More Creatures 15 Immersive Horses 16 Frostfall 17 Torch Arrow 18 SiblingWiP (spawns two NPCs) 19 Race Menu Mortphs UUNP 1a UI Extensions 1b One With Nature 1c Horny Creatures 1d SLAL Animation Obj Billyy 1e FNIS Spells 1f Sexlab Matchmaker 20 SL ANimation Loader 21 CBBE 22 ub_cell_darkarea 23 ub_disable teleportroom 24 Ub_adoption hearthfire extension 25 ub tapestry 26 ub invite any npc 27 BD Horse Race 28 BD Horse NPC 29 BD Horse Hoodie 2a BD Horse SOS 2b SOS - VectorPlexus Regular Addon 2c Schlongs of Skyrim 2d Race Menu 2e XPMSE 2f Race Menu Plugin 30 Alternate Start - Live Another Life 31 BD Horse LAL Addon I have a feeling the "No Directory Male/Female" is the problem.
coolfreaky Posted June 27, 2020 Posted June 27, 2020 gender specification is not a problem ( only needed when you have male specific animations ) your fnis is very ok run LOOT your Load Order seems odd ! did you enable creatures in sexlab MCM ? did you register the animations in SL ANimation Loader MCM ?
SylvianGreymyst Posted June 27, 2020 Author Posted June 27, 2020 I did enable Creatures and also registered animations in MCM, yes. And what do you mean male specificc animations?
coolfreaky Posted June 27, 2020 Posted June 27, 2020 GENDER specific animations: in Skyrim only a few animations are defined gender specific (different animations in the "Animations/female" and "Animations/male" folder. This patch allows you to make other animations gender specific provided they are "properly" created by the animators, see the Note). If you want to use such animations (e.g xp32's New Animation Pack, dualsun's Pretty Combat Idles, or NonokuraSan's Female Animation Pack), simply copy them into your "Animations/female" (or "male"), and use this patch. https://www.nexusmods.com/skyrim/mods/11811 what is your statue now ? still not working !!!
SylvianGreymyst Posted June 27, 2020 Author Posted June 27, 2020 Yup, animations are still not playing at all. And it's just the SL animations, too. Nothing else is broken.
SylvianGreymyst Posted June 27, 2020 Author Posted June 27, 2020 So, Vortex has had this error pop up, not sure if it's related but doesn't hurt to mention it, right? htdPhysicsExtensions.dll(<Manually installed>) not valid.
coolfreaky Posted June 27, 2020 Posted June 27, 2020 htdPhysicsExtensions.dll L E version not S E ( delete it ) try this one https://www.nexusmods.com/skyrimspecialedition/mods/30872?tab=description what is your sexlab version ? sexlab light se or sexlab 1.63 beta 8
SylvianGreymyst Posted June 27, 2020 Author Posted June 27, 2020 Beta 8, one of the steps in the troubleshooting guide I found had me reinstall SL, so I reinstalled Sexlab SE 1.63 beta 8. And installed the htd physics you suggested.
coolfreaky Posted June 27, 2020 Posted June 27, 2020 i think it is 1f Sexlab Matchmaker it is working just with sexlab light . as you have sexlab 1.63 beta 8 best use sexlab Mass matchmaker instead https://www.loverslab.com/files/file/6874-mass-match-maker-se/ or the real one sexlab matchmaker : https://www.loverslab.com/topic/17343-sexlab-matchmaker-updated-09172014/ it seems to be S E compatible .
thoe0039 Posted June 27, 2020 Posted June 27, 2020 quick question. delete/disabel sexlab light? i have a similar problem
thoe0039 Posted June 27, 2020 Posted June 27, 2020 ok so this just happen sexlab error: unsupported version rollback detected (16208->16200) proceed at your own risk.
coolfreaky Posted June 27, 2020 Posted June 27, 2020 1 hour ago, thoe0039 said: quick question. delete/disabel sexlab light? i have a similar problem of course you must delete the light version it conflicts !!! 1 hour ago, thoe0039 said: ok so this just happen sexlab error: unsupported version rollback detected (16208->16200) proceed at your own risk. ...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.