Jordick's 7B Conversions

asianboy345 · December 16, 2014

So, quick question. I'm trying to open up some of your conversions in Nifskope (like the Mammoth Lord and Crusader) and keep getting a wall of error text saying these:

""device position incorrect after block number 3 (NiSkinInstance) at 0x4310 ended at 0x4348 (expected 0x4338)""

""device position incorrect after block number 4 (NiSkinData) at 0x4338 ended at 0x4371 (expected 0x519d)""

""device position incorrect after block number 5 (NiSkinPartition) at 0x519d ended at 0x1a82f3 (expected 0x66e5)""

""device position incorrect after block number 6 (BSLightingShaderProperty) at 0x66e5 ended at 0x66e9 (expected 0x674d)""

""device position incorrect after block number 7 (BSShaderTextureSet) at 0x674d ended at 0x6751 (expected 0x682a)""

""device position incorrect after block number 8 (NiTriShape) at 0x682a ended at 0x682e (expected 0x688b)""

""device position incorrect after block number 9 (NiTriShapeData) at 0x688b ended at 0x688f (expected 0x2902b)""

""device position incorrect after block number 10 (NiSkinInstance) at 0x2902b ended at 0x2902f (expected 0x29067)""

""device position incorrect after block number 11 (NiSkinData) at 0x29067 ended at 0x29097 (expected 0x301aa)""

etc. etc.

This only happens with the body armor, not the boots or the gauntlets, although I've only tested these two.

I can't import them into 3ds max either, that get an error, too. The original ADEC version works fine though.

Any way to fix this?

Jordick · January 6, 2015

So, quick question. I'm trying to open up some of your conversions in Nifskope (like the Mammoth Lord and Crusader) and keep getting a wall of error text saying these:

""device position incorrect after block number 3 (NiSkinInstance) at 0x4310 ended at 0x4348 (expected 0x4338)""

""device position incorrect after block number 4 (NiSkinData) at 0x4338 ended at 0x4371 (expected 0x519d)""

""device position incorrect after block number 5 (NiSkinPartition) at 0x519d ended at 0x1a82f3 (expected 0x66e5)""

""device position incorrect after block number 6 (BSLightingShaderProperty) at 0x66e5 ended at 0x66e9 (expected 0x674d)""

""device position incorrect after block number 7 (BSShaderTextureSet) at 0x674d ended at 0x6751 (expected 0x682a)""

""device position incorrect after block number 8 (NiTriShape) at 0x682a ended at 0x682e (expected 0x688b)""

""device position incorrect after block number 9 (NiTriShapeData) at 0x688b ended at 0x688f (expected 0x2902b)""

""device position incorrect after block number 10 (NiSkinInstance) at 0x2902b ended at 0x2902f (expected 0x29067)""

""device position incorrect after block number 11 (NiSkinData) at 0x29067 ended at 0x29097 (expected 0x301aa)""

etc. etc.

This only happens with the body armor, not the boots or the gauntlets, although I've only tested these two.

I can't import them into 3ds max either, that get an error, too. The original ADEC version works fine though.

Any way to fix this?

None that I can think of.

The BS I'm using for converting sometimes breaks up the meshes to the point that they cannot be opened in Nifskope anymore. I'm aware of that problem and honestly I don't care, because I rarely use Nifskope myself.

As a side note, any further updates can be found at Entry 5 !

Jordick · June 14, 2015

New entry brings new conversions. E6

reconcool · August 25, 2015

Jordick sir..........The Nightingale Armor is missing the face(Problem with the cowl)......no eyes no ears......just a blank spot........

Jordick · August 26, 2015

Jordick sir..........The Nightingale Armor is missing the face(Problem with the cowl)......no eyes no ears......just a blank spot........

Is it with just one hood or is it like that with all hoods?

You can quickly check that with console: help "nightingale hood" (and so on..)

I checked this out and noticed that the head indeed does disappear when you equip ONE of those 5 hoods (I have multiple armor mods installed simultaneously so you might have less than 5). But the problem isn't in the mesh files, but in the plugin instead, so this issue is not made by be (because I only touched the mesh files when I converted this, I didn't touch the plugin at all).

However, I did try to figure it out why one of those hoods turns your head invisible, so I checked the plugin. But I didn't find anything out of ordinary, so that one invisible hood in the game might be just some loose/scrap files that shouldn't be there but the game loads it anyway.

blackmake9527 · December 22, 2015

？？？？

Dexter146 · January 21, 2016

What about 7b for this armor

http://www.nexusmods.com/skyrim/mods/69681/?

Jordick · January 21, 2016

What about 7b for this armor

http://www.nexusmods...im/mods/69681/?

Sorry, no can do. I currently have no interest of converting stuff for the Skyrim, mostly because of the FO4.

As for do I have any interest converting stuff for FO4 then?

Absolutely yes, but it's still way too early to talk about that stuff since it has only been like 2 months since the release and the CK ain't even out yet. But once it does come out, the amount of outfit and armor mods for the FO4 will skyrocket, so perhaps then I can start thinking of converting stuff for it. But like I sayed, at this point it's still way too early to talk about that stuff.

RoastedGotEm · August 1, 2016

~~I can't see any of the pictures. Are the links broken or?~~

Nevermind, just found the link with all of them.

Jordick · August 1, 2016

~~I can't see any of the pictures. Are the links broken or?~~

Nevermind, just found the link with all of them.

Glad you found the link to them.

The reason why the pictures won't show up is because about half a year ago the whole LoversLab website underwent some drastic changes, but the moderators decided revert the site back to this old format. Because of that, all the pictures on the site went haywire and stopped showing up properly, and to get them working again everyone had to re-post those pictures by editing their posts.

I didn't do that back then, because I didn't feel like it was necessary because everyone were focusing on Fallout 4 at that time.

I've only just recently started fixing those pictures to my blog entries, but so far I've only managed to do that to my first 2 entries (entry 1 & entry 2). However, I do intent to fix the pictures in my other entries too, so can expect to see them working within few days.

Jordick · August 2, 2016

Finished fixing the pictures in this Entry, moving on the Entry 4 next.

Jordick · August 7, 2016

Apparently the moderators are still trying to upgrade the site LoversLab site, because the pictures broke again.

Gonna have to wait till the site is stable, before I fix them again.

leimvd008 · May 26, 2017

Be great!64, could you tell me where to download the MOD

Jordick · June 26, 2017

Be great!64, could you tell me where to download the MOD

Sorry for the long respone time. I check the notifications probably every 2 months or so these days as there's not much going on in the LL site for me.

I checked my MediaFire DL links for the Mammoth Lord (64.) conversion and they all seemed to work properly.

As for the original download site for the same mod, it seems that the site linked in that description has been taken down. You can try your luck and try googling around, but I can't help you further.

Maximus523 · February 27, 2018

Is there a way you could make the Glasses from this mod available for a standalone that'll be able to run on SkyrimSE?

Jordick · February 27, 2018

8 hours ago, Maximus523 said:

Is there a way you could make the Glasses from this mod available for a standalone that'll be able to run on SkyrimSE?

Care to elaborate which mod we're talking about exactly?

As for SkyrimSE, I do have plans on converting some of my previous conversions to the SE once the HDT physics are available for it.

Maximus523 · February 27, 2018

6 hours ago, Jordick said:

Care to elaborate which mod we're talking about exactly?

As for SkyrimSE, I do have plans on converting some of my previous conversions to the SE once the HDT physics are available for it.

I am talking about the glasses that are apart of the casual wear mod. as shown in this screenshot. I was wondering if you could remove the
HDT from them and putting them by themselves

Jordick · March 8, 2018

I might consider doing that at some point, but not right now as I'm busy with other stuff and I don't have the tools required atm.

As I mentioned before, I'm planning on converting some of my previous Oldrim conversions to SkyrimSE when the HDT physics are available for it. I'll try to keep your request in mind when that happens.

March 8, 2018

Most of the picutes dont even load (using opera and Chrome)

Jordick · March 13, 2018

On 3/8/2018 at 5:52 PM, NikoNeliko said:

Most of the picutes dont even load (using opera and Chrome)

That's because every time the LL domain gets updated, the pictures stops working for some odd reason. FYI, I've re-uploaded all pictures 3 times already over the years and I'm not really in a mood to do so again only to see that they stop working yet again.

If you've looked carefully in the early Blog Entry, you can see the "Notice" part on each of my Blog Entres, which declares this very issue.

It also tells you that you can check the pictures for every conversion that I've made from my Imgur.com site (though some of my earliest conversions don't have pics in there). Every conversion has album of its own, so you can quickly find the specific conversion that you're looking for with your browser's Search function (Ctrl+F).

Copy-paste in case you missed it:

Spoiler

Notice: Since the pictures keeps breaking up every now and then, I decided not to fix them anymore. However, I have stored them in my Imgur account, so you can go and check the pictures from there.

Also, if I ever decide to start making conversions again, you can see such updates on the latest Entry, which is Entry 6 in this case. (this is also described on every blog entry)

As additional info, I'm not planning on making any more conversions before the HDT Physics and tools for it are available for the SkyrimSE.

Sign In

120 Comments

Recommended Comments

Guest