DavePeesThePool

Ahh, no I didn't have sexlab attraction installed, thanks. Must not have read the 1st post carefully enough to grab all the requirements.

This concept is a long time coming as far as I'm concerned. The random sex mod touched on this concept but just barely. I've been wanting something which has NPC's initiating sex with the PC and other NPC's for quite a while now. And utilizing the relationship rank, arousal, etc... is a no-brainer. Unfortunately this mod gives me a CTD upon startup, before I even get to the title screen. And oddly enough when I loaded the mod into NMM, it changed the mod's name to DE Necro... Not knowing really anything about modding, i assume you started this mod by making a copy of some other small mod and modifying that framework to put your mod into it... then forgot to update some meta data file from which NMM is drawing the mod's title?

It's looking good now. Thanks!

I'm relatively certain that I had downloaded it after you mentioned you updated the bsa. Anyway, I went ahead and redownloaded and overwrote the files as you suggested. I loaded an earlier save from before Alicia turned to Ali and beat her again till she changed. Still seeing the pearly blue.

Good deal, latest update fixed my CTD problem when replacing Alicia with Ali. I'm also seeing the pearly blue for Ali's armor instead of a texture. Though it doesn't look bad necessarily, if nobody else had mentioned it, I would have thought it was deliberately textured as such.

This seems to be working pretty smoothly for me until I beat her enough. I've noticed that when I beat her with alicia's whip she eventually gets a red aura around her (very briefly) then she does a conjure animation where she disappears. I then get a message about sanguine sending a new and improved version of alicia (is this the evil twin everyone is talking about?). In any case, I get the conjure animation again as if she was spawning back in, but nothing appears within this, and a couple seconds after the 2nd conjure animation ends, I CTD. I had this happen multiple times in the hjerim basement, and just had it happen next to the raven rock standing stone in solthsteim. I've basically never seen what happens when I beat her enough cause it CTD's every time. I suspect maybe i'm missing some textures or a mesh for this new version possibly? But I just installed this last night and hadn't installed anything else since so I definitely didn't overwrite anything. I did use the low poly version of the apache skyhair... if that makes a difference.

In case anyone cares, i extrapolated a solution for my problem while reading through ag12's thread for the skyrim slavery mod. In the console you'd run what's below to show the ID for the character you have in each slot... I had to press PageUp to scroll up through the output to get to the ID of slot 1. showquestvars ag12sx3qGlobal I then did a 'prid character_id' with that to get the character selected, and then did a 'moveto player' to get them placed in front of me. Turns out the one occupying my slot was indeed dead, it dropped a dead body in front of me. Tried resurrecting, re-killing, resurrecting again and using the enslave spell, nothing worked... so I changed tactic. Since this is controlled by a quest, I did 'resetquest ag12sx3qGlobal' to reset the quest... that successfully cleared out all my slots. However at this point I'm still not able to successfully enslave anyone... it gives me experience each time I cast at someone below 10% health, but I never get the message that they are enslaved, and they just stay hostile to me (which by the way, whoever above was asking for the console commands to up your slaver level, this may be a dirty workaround where you can spam the spell after resetting the quest to get your level really high on the same enemy [assuming your character can tank all their hits, like I said they are hostile]. However I did notice that even though I got to level 17, and received the message that I should be able to enslave 2 at a time now... it still would only let me use one. I don't know if that's a symptom of the workaround, or if this mod isn't fully set up to handle multiple slots. I did notice in ag12's thread that for the original mod, they had to do a workaround where they had to do some modification in the construction set to open up the slots... I had assumed (or hoped) that this particular mod handled this already, but maybe not). Anyway... back on track, to make it so you can again actually enslave someone, you need to get the quest back on its correct stage. I noticed when I ran the original showquestvars that it was on stage 90... so I did a 'setstage ag12sx3qGlobal 90' and after that, I was able to successfully enslave people again.

It might also be cool to have an option whereby the higher your slaver skill, the higher the low health threshold will be.

Is there a console command I can use to find my slave in slot 1... or remove them from the slot, or just clear out all the slots? I enslaved my first bandit, brought them to an inn because I didn't know about the morthal sewers place to sell them and after I couldn't figure out how to sell them, I let them go (using the command in the special menu). I then went to another location and cast enslave on another bandit... I got the experience points and it said I enslaved them, but then when I talk to them, I only get the sexlab romance and sexlab submit dialog options... not the slaver menu. I then recast enslave, got more slavery experience points, but still the same thing. I left that bandit there and found another bandit... same issue, except this time I cast enslave on them a few times (getting more xp every time) until it told me all my slots were full and couldn't enslave any more. At this point when I cast the slave list, it shows slot 1 has Bandit... and all the other slots are empty. I went to the original camp where I enslaved my first bandit (who actually worked properly, but I had released). Apparently she walked all the way back there from the inn where I freed her... she was naked and non-hostile, and when I talk to her, no slave options, just the dialog from the 2 sexlab mods... casting enslave on her at this point tells me I don't have any open slots. So I killed her. I then killed the other 2 bandits from the other locations I had attempted to enslave. I'm fairly certain that those 3 are the only ones I attempted to enslave (but I could be wrong)... I'm still showing Bandit in slot 1 in the list slaves spell output. Does killing a slave not remove them from the list? Or did I accidentally do something funky that somehow threw off the mod? I can tell you that between the point in time where I had the working slave and I attempted to enslave someone else (at which point it was no longer working) I had installed sexlab aroused, and updated sexlab submit to the latest version. Otherwise nothing changed. Any thoughts?

if you properly installed bodyslide and bodyslide ++, you will find an executable bodyslide++ in this folder: ...\Skyrim\Data\CalienteTools\Bodyslide\ You run that, and the gui has dropdowns on the top left for group, and sliderset. Once you've select the options indicated above, you click the build button.

Thank you good sir! That did the trick.

Yeah, I uninstalled TBBP a couple days ago that I got from the nexus and nabbed the one someone recommended earlier in this topic that was hosted on loverslab and installed that one instead. I can confirm Orc&ElfFix4TBBP.esp is present and activated in my mod manager. By the way, the character giving me problems is breton.

The weird thing is... everything works fine in a couple scenarios... - With TBBP installed, and using regular bodyslide meshes... no crash on disrobe - with TBBP installed, and using bodyslide ++ and the CB++Body TBBP sliderset, no crash on disrobe (and TBBP is functioning great... just no pregnant belly) - with TBBP NOT installed, and using bodyslide ++ and the CB++Body TBBP Belly or BellyBig50 slidersets, no crash on disrobe, but the body looks terrible when trying to animate when I walk without TBBP installed (however, the pregnant belly works with my sexlab hentaipregnancy) - with TBBP installed, using bodyslide ++ and the CB++Body TBBP Belly or BellyBig50 slidersets, I crash on disrobe. So it's not just the mesh alone... but somehow it's not working right with TBBP actually installed even though I know TBBP is working correctly with other TBBP specific meshes. I've installed/overwritten/reinstalled xp32's skeleton 5 or 6 times in the last few days... Just for sanity's sake (or insanity I guess, depending on how you look at it)... the behavior I described above has been the same throughout it all.

I appreciate the help. i followed your steps... Still getting CTD upon disrobe.

I would hate for you to eat your shirt. I did use the troubleshooting section. Just to make sure i just went through it again, reinstalled xpsm 1-81 using NMM. Went into bodyslide ++, chose CB ++ Bodies group filter, CB ++ Body TBBP Belly sliderset... then build. startup the skse from NMM, load my game, disrobe, CTD. If at this point I go into bodyslide ++, choose CB ++ Bodies and CB ++ Body TBBP sliderset, build. I can open the game using the same steps above, disrobe, and everything looks fine, the TBBP animations are working great... I just have no pregnant belly with my hentaipregenancy. Maybe there's a step I'm missing from xp32's installation? Like I said, I'm just using NMM to install the XPMS 1-81 NMM-BAIN Installer (downloaded right through the manager)... I've downloaded the FULL RESOURCES v1-6 - For MODERS-Animation but didn't do anything with it... does it contain something I need? xp32's installation instructions, at least on the nexus description page, aren't very clear (or in fact, there's not really any instructions). But I figured since it said "for Moders" and I'm not a modder, that it wasn't something I needed. I was already using realistic ragdoll (reduced force) from way before installing xp32... so I didn't do anything to change or reinstall that... I am NOT using joy of perspective (and never had). Maybe there's still something I'm missing? I do try to read every OP for stuff installed from loverslab, and every description from anything installed from the nexus before installing, so I THINK I have all my requirements in order... but I'm only human. Do you think I'm missing something? Don't eat your shirt