raptor4d4 Posted August 20, 2016 Posted August 20, 2016 I've been having ENB troubles all week, ever since I bought and set up my new gaming rig. The ENB I was using on my old rig has a problem on my new one. Interiors all look perfect but as soon as I step outside I get this. As you can see, the sky is excessively blue and bright. I know there has to be a setting I can tweak in the ENB GUI but I have no idea what! My attempts to find a substitute ENB have failed. A decent one I found to replace it keeps breaking on me for unknown reasons. I want to get my original ENB working again. I'm at my wits end with this so ANY help anyone can give me is greatly appreciated. PLEASE HELP ME FIX THIS!!! loadorder.txt Papyrus.0.log
Anrakis Posted August 20, 2016 Posted August 20, 2016 I know multiple possible culprits. Not sure what may apply for your problem: Check you skyrimprefs.ini and make sure bFloatPointRenderTarget is set to 1 Does the problem happen only on you savegame or also with a complete new game? Do you have mods installed that change the weather? What happens if you fiddle around with the bloom settings? What happens if you decrease SkyGradientIntensity?
raptor4d4 Posted August 20, 2016 Author Posted August 20, 2016 I know multiple possible culprits. Not sure what may apply for your problem: Check you skyrimprefs.ini and make sure bFloatPointRenderTarget is set to 1 Does the problem happen only on you savegame or also with a complete new game? Do you have mods installed that change the weather? What happens if you fiddle around with the bloom settings? 1) I did adjust that setting a long time ago. I use Mod Organizer so I made sure to modify the ini through MO. 2) Every save. Old and new. 3) I edited my first post and attached my load order. But no. I removed weather modifying mods a long time ago. What's strange is that it was working perfectly fine on my old rig. But I transferred everything to my new rig, not leaving a single thing out, and suddenly I got this. 4) I tweaked one or two bloom settings but didn't see much difference. But there are so many bloom settings I have no idea which one I should be aiming for. Any suggestions?
Anrakis Posted August 20, 2016 Posted August 20, 2016 I'm by no way an expert in enb bloom settings. All I know is that bloom and SkyGradientIntensity may have an effect on the brightness of the sky. Does the problem occur when starting a new game without any mods? If so then we can safely assume that no mod is interfering..
raptor4d4 Posted August 20, 2016 Author Posted August 20, 2016 I'm by no way an expert in enb bloom settings. All I know is that bloom and SkyGradientIntensity may have an effect on the brightness of the sky. Does the problem occur when starting a new game without any mods? If so then we can safely assume that no mod is interfering.. Created a new profile where the only mods active were the ones necessary for the ENB and Alternate Start so I could quickly skip the intro. Still go the problem. I'll play with more bloom settings.
raptor4d4 Posted August 20, 2016 Author Posted August 20, 2016 Turned all the bloom settings down to zero. No noticeable change.
SepticSpoon Posted August 20, 2016 Posted August 20, 2016 Uninstall your enb/preset, then re-install it?
raptor4d4 Posted August 20, 2016 Author Posted August 20, 2016 Uninstall your enb/preset, then re-install it? This particular ENB I've done that probably 8 times now. No dice.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.