Help me!! Game Crash and I do not know why!!

[Kahn81]

Hello,

I ask for help not to start all over again. The game starts charging me regularly saves, but when I walk or change feud I crash to the desktop. I also tried to start a new game and delete the last mod, but nothing.

Most do not know what to do, I enclose the registry Papyrus .... please help me !!

 

Papyrus.0.log

 

thank you all

[Andukar]

Men, i know this problem. When you moving between locations starting autosave and with autosave (and save as usual) game crashing.

 

So, when u load last save, call console for command. Than click on your hero and write "kill". Hero immediatly dying and initialising autoload to last save.

And than you can save game without crashes.

 

But here one problem - always when your game starts first time, u need to kill your hero with this way. Example - launch game, load save, kill and autoload. Kill only once at session of game.

[Guest]

It looks to me that you (among others) have a big problem with Hearfire DCL. Do you have installed Heartfire USKP?

Can you also post your load order?

[Kahn81]

It looks to me that you (among others) have a big problem with Hearfire DCL. Do you have installed Heartfire USKP?

Can you also post your load order?

 

hello and thk,

 

i have installed hearthfires.esm, you're referring to this mod?

 

how can I extract a file with my load order?

 

thk again

Men, i know this problem. When you moving between locations starting autosave and with autosave (and save as usual) game crashing.

 

So, when u load last save, call console for command. Than click on your hero and write "kill". Hero immediatly dying and initialising autoload to last save.

And than you can save game without crashes.

 

But here one problem - always when your game starts first time, u need to kill your hero with this way. Example - launch game, load save, kill and autoload. Kill only once at session of game.

thk,

i will try and I'll let you know:))

[Guest]

Which mod manager are you using - MO or NMM? If MO, I can't help you but if using NMM you can do it by visiting my OP in my signature or like this:

• Open your plugins.txt in a text editor. plugins.txt is found in your local application data folder. On Windows Vista/7, this is C:\Users\[username]\AppData\Local\Skyrim\plugins.txt.
• In plugins.txt, list the plugins you want active in the load order that you want them in. Each plugin goes on a separate line. Master files should go before non-master files. Merged or imported plugins are not active plugins, so should not be listed in plugins.txt.
• If you also have a loadorder.txt in the same folder as plugins.txt, then update it so that the plugins in plugins.txt are in the same order in both files.
• Save the edited file(s) and quit.

 

[Kahn81]

 

Which mod manager are you using - MO or NMM? If MO, I can't help you but if using NMM you can do it by visiting my OP in my signature or like this:

• Open your plugins.txt in a text editor. plugins.txt is found in your local application data folder. On Windows Vista/7, this is C:\Users\[username]\AppData\Local\Skyrim\plugins.txt.
• In plugins.txt, list the plugins you want active in the load order that you want them in. Each plugin goes on a separate line. Master files should go before non-master files. Merged or imported plugins are not active plugins, so should not be listed in plugins.txt.
• If you also have a loadorder.txt in the same folder as plugins.txt, then update it so that the plugins in plugins.txt are in the same order in both files.
• Save the edited file(s) and quit.

 

i have this

 

plugins.txt

 

loadorder.txt

 

i can copy all in plugins.txt and paste in loadorder file?

 

i use NMM and wyre bash for boss

 

thk again

[Guest]

OK, here is what you have to do:

Since you have all DCL's you have to install their USKPs - http://www.nexusmods.com/skyrim/mods/19/?tab=4&&navtag=http%3A%2F%2Fwww.nexusmods.com%2Fskyrim%2Fajax%2Fcomments%2F%3Fmod_id%3D19%26page%3D1%26sort%3DDESC%26pid%3D0%26thread_id%3D456679&pUp=1

- those patches fixing bugs in DCLs. Since you already have USKP for main game, you have to install all 3 others.

 

2 - Your load order is a mess. Install LOOT, and remove BOSS. LOOT is replacer for BOSSS and it's updated. https://loot.github.io/

Now after installing every single DCL run LOOT.

 

3. Pay attention to check for error that LOOT will report and do accordingly.

 

4. Make sure that you also have latest SKYUI 5.1, SKSE 1.7.3, FNIS 5.5

 

When you do all of this, come again and let us know what is happening.

[Kahn81]

OK, here is what you have to do:

Since you have all DCL's you have to install their USKPs - http://www.nexusmods.com/skyrim/mods/19/?tab=4&&navtag=http%3A%2F%2Fwww.nexusmods.com%2Fskyrim%2Fajax%2Fcomments%2F%3Fmod_id%3D19%26page%3D1%26sort%3DDESC%26pid%3D0%26thread_id%3D456679&pUp=1

- those patches fixing bugs in DCLs. Since you already have USKP for main game, you have to install all 3 others.

 

2 - Your load order is a mess. Install LOOT, and remove BOSS. LOOT is replacer for BOSSS and it's updated. https://loot.github.io/

Now after installing every single DCL run LOOT.

 

3. Pay attention to check for error that LOOT will report and do accordingly.

 

4. Make sure that you also have latest SKYUI 5.1, SKSE 1.7.3, FNIS 5.5

 

When you do all of this, come again and let us know what is happening.

Thank you so much,

I'll try following your instructions and I'll let you know!!

[Kahn81]

OK, here is what you have to do:

Since you have all DCL's you have to install their USKPs - http://www.nexusmods.com/skyrim/mods/19/?tab=4&&navtag=http%3A%2F%2Fwww.nexusmods.com%2Fskyrim%2Fajax%2Fcomments%2F%3Fmod_id%3D19%26page%3D1%26sort%3DDESC%26pid%3D0%26thread_id%3D456679&pUp=1

- those patches fixing bugs in DCLs. Since you already have USKP for main game, you have to install all 3 others.

 

2 - Your load order is a mess. Install LOOT, and remove BOSS. LOOT is replacer for BOSSS and it's updated. https://loot.github.io/

Now after installing every single DCL run LOOT.

 

3. Pay attention to check for error that LOOT will report and do accordingly.

 

4. Make sure that you also have latest SKYUI 5.1, SKSE 1.7.3, FNIS 5.5

 

When you do all of this, come again and let us know what is happening.

hello, I'm sorry I'm trying to do some 'testing by following your instructions )

 

But 'I was thinking of starting all over from scratch to do a clean job using only NMM and LOOT, there is a guide or a list to help you install the mod basic and and the most known and used?

[Guest]

 

OK, here is what you have to do:

Since you have all DCL's you have to install their USKPs - http://www.nexusmods.com/skyrim/mods/19/?tab=4&&navtag=http%3A%2F%2Fwww.nexusmods.com%2Fskyrim%2Fajax%2Fcomments%2F%3Fmod_id%3D19%26page%3D1%26sort%3DDESC%26pid%3D0%26thread_id%3D456679&pUp=1

- those patches fixing bugs in DCLs. Since you already have USKP for main game, you have to install all 3 others.

 

2 - Your load order is a mess. Install LOOT, and remove BOSS. LOOT is replacer for BOSSS and it's updated. https://loot.github.io/

Now after installing every single DCL run LOOT.

 

3. Pay attention to check for error that LOOT will report and do accordingly.

 

4. Make sure that you also have latest SKYUI 5.1, SKSE 1.7.3, FNIS 5.5

 

When you do all of this, come again and let us know what is happening.

hello, I'm sorry I'm trying to do some 'testing by following your instructions )

 

But 'I was thinking of starting all over from scratch to do a clean job using only NMM and LOOT, there is a guide or a list to help you install the mod basic and and the most known and used?

 

 

You can visit my thread in my signature and find tips, suggestions and alerts what to do.

If you install Skyrim from scratch and use NMM for mods installation, you'll be fine. I did it recently and all went well.

 

[Kahn81]

 

 

OK, here is what you have to do:

Since you have all DCL's you have to install their USKPs - http://www.nexusmods.com/skyrim/mods/19/?tab=4&&navtag=http%3A%2F%2Fwww.nexusmods.com%2Fskyrim%2Fajax%2Fcomments%2F%3Fmod_id%3D19%26page%3D1%26sort%3DDESC%26pid%3D0%26thread_id%3D456679&pUp=1

- those patches fixing bugs in DCLs. Since you already have USKP for main game, you have to install all 3 others.

 

2 - Your load order is a mess. Install LOOT, and remove BOSS. LOOT is replacer for BOSSS and it's updated. https://loot.github.io/

Now after installing every single DCL run LOOT.

 

3. Pay attention to check for error that LOOT will report and do accordingly.

 

4. Make sure that you also have latest SKYUI 5.1, SKSE 1.7.3, FNIS 5.5

 

When you do all of this, come again and let us know what is happening.

hello, I'm sorry I'm trying to do some 'testing by following your instructions )

 

But 'I was thinking of starting all over from scratch to do a clean job using only NMM and LOOT, there is a guide or a list to help you install the mod basic and and the most known and used?

 

 

You can visit my thread in my signature and find tips, suggestions and alerts what to do.

If you install Skyrim from scratch and use NMM for mods installation, you'll be fine. I did it recently and all went well.

 

hello,

I installed everything using only NMM and LOOT but at the moment I have the following problems.

do not start animations, sex between humans and those with animals.

I can not understand what is wrong.

if you can take a look in my files of mod you do me a favor.

loadorder.txt

 

plugins.txt

 

I also have this problem with sexlab 1.60 and I can not solve it.

 

 

you can advise me how to solve?

thanks a lot

[Guest]

You have "PC Exclusive Animation Path" (PCEA) mod that overwrote Sexlab animations. Did you tick the PCEA patch when running FNIS? That will generate whatever PCEA needs and what is not part of the PCEA upload.

If you didn't tick it when running FNIS, do it and you'll see if you will get any errors. If you get errors, copy all those animations from your sexlab mods  and put them into the the pcea animation folder. Nt sure if that is still working.

 

or

 

Uninstall PCEA, reinstall FNIS and SL and try again.

 

 

[Kahn81]

You have "PC Exclusive Animation Path" (PCEA) mod that overwrote Sexlab animations. Did you tick the PCEA patch when running FNIS? That will generate whatever PCEA needs and what is not part of the PCEA upload.

If you didn't tick it when running FNIS, do it and you'll see if you will get any errors. If you get errors, copy all those animations from your sexlab mods  and put them into the the pcea animation folder. Nt sure if that is still working.

 

or

 

Uninstall PCEA, reinstall FNIS and SL and try again.

hello,

I installed PC Exclusive Animation Path" (PCEA) and I got these messages

 

All Anim Lists scanned. Generating Behavior Files....

 16 GENDER modifications for Animations\male

 46 GENDER modifications for Animations\female

 374 GENDER modifications forAnimations\ PCEA\male

>>Warning:  3 unmatched PCEA\male Animation(s) (see GenerateFNIS_LogFile.txt)<<

 377 GENDER modifications forAnimations\ PCEA\female

>>Warning:  2 unmatched PCEA\female Animation(s) (see GenerateFNIS_LogFile.txt)<<

Generating animationsetdatasinglefile.txt ...

 

okay or is there something wrong?

[Guest]

No, it's not OK. FNIS reported animations unmatched errors. You better de-install them. After you do that, Do not check PCEA.

[Kahn81]

No, it's not OK. FNIS reported animations unmatched errors. You better de-install them. After you do that, Do not check PCEA.

tried uninstalling and reinstalling but nothing. most do not know what to do.

[Guest]

OK, lets do ike this:

1. Start NMM manager and De-install all "PC Exclusive Animation Path" (PCEA) animations.

2. Run FNIS.

3. Uninstall main FNIS file (behave...) and other two if you have them (Creature support and FNIS spells). If they are correctly uninstalled, they will be greyed.

4. Close NMM

5. Open NMM and install FNIS

6. GO to your My Games/Skyrim/Data/Tools/GenerateFNIS_for_Users/ and click on GenerateFNISforUsers

7. Enable firs two boxes in FNIS - Gender specific animations and Skeleton Arm fix

8. press Update FNIS Behaviour

9. Check if there'll be a Warning at the end of the list

 

If not, that's good. If they are, post them here.

[fore]

 

You have "PC Exclusive Animation Path" (PCEA) mod that overwrote Sexlab animations. Did you tick the PCEA patch when running FNIS? That will generate whatever PCEA needs and what is not part of the PCEA upload.

If you didn't tick it when running FNIS, do it and you'll see if you will get any errors. If you get errors, copy all those animations from your sexlab mods  and put them into the the pcea animation folder. Nt sure if that is still working.

 

or

 

Uninstall PCEA, reinstall FNIS and SL and try again.

hello,

I installed PC Exclusive Animation Path" (PCEA) and I got these messages

 

All Anim Lists scanned. Generating Behavior Files....

 16 GENDER modifications for Animations\male

 46 GENDER modifications for Animations\female

 374 GENDER modifications forAnimations\ PCEA\male

>>Warning:  3 unmatched PCEA\male Animation(s) (see GenerateFNIS_LogFile.txt)<<

 377 GENDER modifications forAnimations\ PCEA\female

>>Warning:  2 unmatched PCEA\female Animation(s) (see GenerateFNIS_LogFile.txt)<<

Generating animationsetdatasinglefile.txt ...

 

okay or is there something wrong?

 

These messages can be ignored.

 

Unfortunately I couldn't convince xp32 to remove those files before she left the scene for good.

[Guest]

Thanks for help Fore. I recommended for deletion of this animations since many other users on LL had problems with them and FNIS didn't work well. I checked many posts. I personally do not use them and therefore, I'm no and expert. I tried to help with my limited knowledge.

[Kahn81]

OK, lets do ike this:

1. Start NMM manager and De-install all "PC Exclusive Animation Path" (PCEA) animations.

2. Run FNIS.

3. Uninstall main FNIS file (behave...) and other two if you have them (Creature support and FNIS spells). If they are correctly uninstalled, they will be greyed.

4. Close NMM

5. Open NMM and install FNIS

6. GO to your My Games/Skyrim/Data/Tools/GenerateFNIS_for_Users/ and click on GenerateFNISforUsers

7. Enable firs two boxes in FNIS - Gender specific animations and Skeleton Arm fix

8. press Update FNIS Behaviour

9. Check if there'll be a Warning at the end of the list

 

If not, that's good. If they are, post them here.

thk,

'll try to do this, if I can not try to re-install all the mods again.

My mistake was to reinstall all the mods together at one time.

thanks a lot, I'll know you

[Kahn81]

Thanks for help Fore. I recommended for deletion of this animations since many other users on LL had problems with them and FNIS didn't work well. I checked many posts. I personally do not use them and therefore, I'm no and expert. I tried to help with my limited knowledge.

 

Hello Elf Prince,

I started again and install only the mods to start lab sex and sex mod lab and started the game.

everything perfect ) finally.

I ask you something, please, you have a list of mods to make the female character really sexy and also for armor ?? )

thanks a lot

[Guest]

I'm glad you solved your problem

It is hard to recommend body type since we all have different tastes. I prefer UNP skinny athletic or muscular body with revelling or skimpy type of armour.

   

 

If you are still interested for it, after seeing the pictures, I will post you my mod names.

 

Can you mark your thread as solved so the others might see what was the solution to your problem and find it helpful for them too?

You can either write what did you do, and mark it solved, or you can click on the post that suggested you what to do.