Luxury Collection - UUNP HDT(2016.01.18) - SE

[nehaberlan]

Luxury Collection - UUNP HDT(2016.01.18) - SE

View File

---

This is a basic conversion with some modification of Luxury Collection for UUNP HDT + Bodyslide (2016.1.19/last update) .

The Credits:

darknsky

ApoKrytia

 

You can download it from this MEGA link:

Luxury Collection - UUNP HDT(2016.01.18) - SE.7z

https://mega.nz/file/C4NAHJaI#O4jR3mLILvxrpgcZrJYaIhxIeI45EeGlRkI7EV09iYo

 

What I did about it?

 

I used Cathedral Assets Optimizer for converting from LE to SE.

There were High Heels, boots, sandals that have needed HDT High Heels.

I removed all spells belonging to HDT High Heels, then I removed them.

There were some settings for NiOverride High Heels.

I replaced them by RaceMenu High Heels (Height Fixes).

Of coarse, I kept the correct height settings on the heels.

So, you just need RaceMenu, RaceMenu High Heels (Height Fixes).

 

I added another "Luxury Collection.esp", that doesn't require "Heels Sound".

 

Did I checked?

 

I created a Carlotta outfit by using BodySlide.

Then, I selected the model that I want by using NifSkope.

I used it on my follower.

Before, I directly copied/pasted the Carlotta default _0.nif and _1.nif files. These files caused big problem while I was using HDT-SMP.

This time I created the Carlotta via BodySlide, I didn't get any problem.

Instead of HDT-SMP/Faster SMP, you can try with CBP/CBPC too.

 

Requirements:

BodySlide and Outfit Studio

Legacy UUNP (for SE) (not required, but it's very helpful, imo)...

RaceMenu

RaceMenu High Heels (Height Fixes)

SkyUI

SKSE64 Current Special Edition build 2.0.20 (game version 1.5.97)

XP32 Maximum Skeleton Special Extended - XPMSSE

 

As Physics, you would like to use/try:

HDT-SMP (Skinned Mesh Physics)

FSMP - Faster HDT-SMP

CBPC

CBP Physics with SINful CBP, or with Immersive CBP Config.

 

Heels Sound 1.6 SSE

 

And, an UUNP compatible female body. If you don't have any in your mind, you can try these ones:

BHUNP (UUNP Next Generation) SSE

UNP Female Body Renewal

UNP Blessed Body SE

COCO Body (3BBB) SE

 

About "Heels Sound" requirement:

I prepared a "Luxury Collection.esp".

You can find a file named "Luxury Collection.esp - Heels Sound Not Required.7z" in the Download List.

That .esp file doesn't require  Heels Sound. I just removed the "Heels Sound.esm" from its master files.

I didn't change any settings on the heels/boots that use Heels Sound.

 

Please, do not hesitate to tell me if you have any suggestions, or bugs, missing textures/meshes, or somethings like those that you would've noticed,

 

I'm a rookie about using BodySlide/Outfit Studio, SE. So, I can do mistake.

 

Cheers...

 

 

---

• Submitter
  nehaberlan
• Submitted
  12/16/2023
• Category
  Adult Mods
• Requires
  BodySlide and Outfit Studio, Legacy UUNP (for SE), RaceMenu, RaceMenu High Heels (Height Fixes), SkyUI, SKSE64 Current Special Edition build 2.0.20 (game version 1.5.97), XP32 Maximum Skeleton Special Extended - XPMSSE, Heels Sound 1.6 SSE
• Regular Edition Compatible
  No

 

[RevanCathal]

Thank you. I've been trying to find this for a few days. Apparently your edit has a cyclic error in the two plugins, making them both each others master file.

Edited December 17, 2023 by Jgoftl

[nehaberlan]

12 hours ago, Jgoftl said:

Thank you. I've been trying to find this for a few days. Apparently your edit has a cyclic error in the two plugins, making them both each others master file.

 

Hi,

 

I don't understand about "cyclic error". I don't even know what does it mean.

 

If it's something about the setup in BodySlide's .xml files, I can't do anything, because I don't understand either BodySlide, Outfit Studio.

If there are something that I forgot in the meshes, and I can correct them easily, I can try them.

 

 

[RevanCathal]

4 hours ago, nehaberlan said:

 

Hi,

 

I don't understand about "cyclic error". I don't even know what does it mean.

 

If it's something about the setup in BodySlide's .xml files, I can't do anything, because I don't understand either BodySlide, Outfit Studio.

If there are something that I forgot in the meshes, and I can correct them easily, I can try them.

 

 

No, the cyclic error is caused by the fact that you somehow caused both Luxury Collection.esp and Luxury Collection Vendor.esp plugins to be each other's master plugin, confusing LOOT and Vortex on the order in which to load the plugins. And because of this error, I can't load them in xEdit to fix it myself. I had to grab the LE file Luxury Collection.esp plugin just to fix the problem.

[nehaberlan]

1 hour ago, Jgoftl said:

No, the cyclic error is caused by the fact that you somehow caused both Luxury Collection.esp and Luxury Collection Vendor.esp plugins to be each other's master plugin, confusing LOOT and Vortex on the order in which to load the plugins. And because of this error, I can't load them in xEdit to fix it myself. I had to grab the LE file Luxury Collection.esp plugin just to fix the problem.

 

Can you show me how you did it? And/or can you send me the corrected files?

So, I can share with people.

 

Edit:

I think, I understand what you meant.

 

In my files,

Luxury Collection.esp has only Skyrim.esm as master file.

Luxury Collection Vendor.esp has Skyrim.esm and Luxury Collection.esp.

Maybe, I have the correct version.

 

I added a new package named "Luxury Collection esp Files - SE.7z"

Maybe, they are the correct files.

 

 

Luxury Collection esp Files - SE.7z

 

 

 

Edited December 17, 2023 by nehaberlan

[RevanCathal]

49 minutes ago, nehaberlan said:

 

Can you show me how you did it? And/or can you send me the corrected files?

So, I can share with people.

 

All I did was extract just the Luxury Collection.esp plugin from the original LE file you converted from directly to my games data folder and let it replace the plugin already in the folder. Here's the plugin from the LE mod:

Luxury Collection.esp

[nehaberlan]

14 minutes ago, Jgoftl said:

All I did was extract just the Luxury Collection.esp plugin from the original LE file you converted from directly to my games data folder and let it replace the plugin already in the folder. Here's the plugin from the LE mod:

Luxury Collection.esp 448.53 kB · 1 download

 

Thank You...

 

[RevanCathal]

So the bodyslide files need proper converting. The problem with outfit studio is that at some point it updated to where you have to have a properly pathed osp file for each item for it to properly adjust each item to a new preset.

Edited December 18, 2023 by Jgoftl

[nehaberlan]

On 12/18/2023 at 10:43 PM, Jgoftl said:

So the bodyslide files need proper converting. The problem with outfit studio is that at some point it updated to where you have to have a properly pathed osp file for each item for it to properly adjust each item to a new preset.

 

I understand nothing about these BodySlide's/Outfit Studio's osp, xml, sliders, presets, blah, blah, blah, etc...

Someone experienced about this kind of these stuff might be very helpful.

 

Someone, Volunteer(s)!!! Please Help!!!

Make this mod survive, not sink!!!

 

 

 

[brussh]

On 12/17/2023 at 9:06 PM, Jgoftl said:

No, the cyclic error is caused by the fact that you somehow caused both Luxury Collection.esp and Luxury Collection Vendor.esp plugins to be each other's master plugin, confusing LOOT and Vortex on the order in which to load the plugins. And because of this error, I can't load them in xEdit to fix it myself. I had to grab the LE file Luxury Collection.esp plugin just to fix the problem.

Thank you I thought. it was something I had done on my end.

[DeathApproaches]

On 6/17/2024 at 9:34 AM, brussh said:

Thank you I thought. it was something I had done on my end.

It *is* something you did on your end... you made Luxury require Vendor (incorrect), as well as made Vendor require Luxury. That's the "loop" part.

 

It's an easy fix, anyone can, takes literally a second... fire up CK, click Data, pick Luxury, and on the right side of the load window, you'll see the list of the required master files, just click on Vendor then Ctrl-Delete it from the masters list. That's it. So next time you update it, remember this... I suppose there are a Skyrim gamers that never have used CK etc, but in the loversllab adult Skyrim world, most know how to do basic CK/xEdit, BodySlide/OutfitStudio, Fores rebuilding, mod manager stuff like load ordering/LOOT, etc. So them doing it themselves isn't that big a deal, either.

[nehaberlan]

12 hours ago, DeathApproaches said:

It *is* something you did on your end... you made Luxury require Vendor (incorrect), as well as made Vendor require Luxury. That's the "loop" part.

 

It's an easy fix, anyone can, takes literally a second... fire up CK, click Data, pick Luxury, and on the right side of the load window, you'll see the list of the required master files, just click on Vendor then Ctrl-Delete it from the masters list. That's it. So next time you update it, remember this... I suppose there are a Skyrim gamers that never have used CK etc, but in the loversllab adult Skyrim world, most know how to do basic CK/xEdit, BodySlide/OutfitStudio, Fores rebuilding, mod manager stuff like load ordering/LOOT, etc. So them doing it themselves isn't that big a deal, either.

 

I just converted the mod from LE to SE. I didn't know that Vendor had to be removed from the master files list.

 

I noticed when I opened LOOT, I got error message for the both files.

Then, I deleted Vendor .esp from Luxury .esp in the Creation Kit as you said, and I saved it.

It worked. I had no problem, and got no error message at all.

I replaced the old Luxury .esp by this new .esp one, and made a new package.

The name of the package is "Luxury Collection - UUNP HDT(2016.01.18) - SE - 1.01.7z".

When I upload it in MEGA/MediaFire, I'll send the links.

 

 

Thank you...

Edited August 2, 2024 by nehaberlan

[DeathApproaches]

Ahh, well done. And that's cool, I learned something new too, so record editing mods for LE->SE conversion doesn't always break masters or require full rebuilding; seems if the oldrim original had this loop, the converted will have it too! :-)

 

I gave it a shot, seems to work great... all re-slotting is proper. bodyslide reshaping for different body presets works fine, but the prices though are a bit "mid/late-game", I wonder what the intent was? I guess based on their armor values. you'd need a hundred thousand coins to buy complete set in one color, probably over a half a million to buy one of everything. maybe darknsky just assumed everyone would use console, who knows?

[nehaberlan]

9 hours ago, DeathApproaches said:

Ahh, well done. And that's cool, I learned something new too, so record editing mods for LE->SE conversion doesn't always break masters or require full rebuilding; seems if the oldrim original had this loop, the converted will have it too! 🙂

 

I gave it a shot, seems to work great... all re-slotting is proper. bodyslide reshaping for different body presets works fine, but the prices though are a bit "mid/late-game", I wonder what the intent was? I guess based on their armor values. you'd need a hundred thousand coins to buy complete set in one color, probably over a half a million to buy one of everything. maybe darknsky just assumed everyone would use console, who knows?

 

Hi,

 

I didn't change anything about the costs/prizes of the armor values.

If they cost 500 grand, the only thing to do is to use console.

 

If you want to add gold:
player.additem 0000000f 1000000
player.additem f 1000000
So, you'll have 1 million extra gold.

I don't know if "tgm" command works for it also.

 

Cheers...

 

[nehaberlan]

I want to share something with you.

HDT-SMP (Skinned Mesh Physics) caused stretching problem after I made an editing on Apathie Boots.

When I uninstalled it, then I started to use CBPC - Physics with Collisions for SSE and VR

HDT-SMP Physics, the stretching bug has been gone.

 

I asked to the Technical Support. I couldn't get any answer.

 

If you want to check on it, here is the link:

https://www.loverslab.com/topic/239232-alpha-channel-causes-stretches-in-se/#comment-6846945

 

There are screenshots and more details like what I did on the Apathie Boots' .nif & .dds files, etc...

 

Cheers...

 

[lordregnis]

wtb bhunp

[nehaberlan]

4 hours ago, lordregnis said:

wtb bhunp

 

What is "wtb"?

"Want/willing/waiting to buy" BHUNP?

 

Instead of letters, can you use words/sentences?

 

 

[lordregnis]

4 hours ago, nehaberlan said:

 

What is "wtb"?

"Want/willing/waiting to buy" BHUNP?

 

Instead of letters, can you use words/sentences?

 

 

you nailed it yes

[nehaberlan]

9 hours ago, lordregnis said:

you nailed it yes

Good luck...

[lordregnis]

On 7/17/2025 at 3:26 AM, nehaberlan said:

Good luck...

with what? it was basically a joke since i know most people are too lazy to port to bhunp unless theyve done so already