Error with mods on AMD driver higher than 22.5.1

[julian470]

Today I updated to the new version of AMD drivers from WHQL, and well I enter the game and when I click to enter it starts to load it flashes and continues to load and then hangs and takes me to the desktop.
In the dump it tells me the following:
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%p referenced memory at 0x%p. The memory could not be %s.

 

And:  

FAILURE_BUCKET_ID:  NULL_CLASS_PTR_WRITE_c0000005_DOAX_VV.exe!Unknown

 

This only happens when I install the Costume Costumizer mod.

 

[julian470]

8 hours ago, julian470 said:

Today I updated to the new version of AMD drivers from WHQL, and well I enter the game and when I click to enter it starts to load it flashes and continues to load and then hangs and takes me to the desktop.
In the dump it tells me the following:
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%p referenced memory at 0x%p. The memory could not be %s.

 

And:  

FAILURE_BUCKET_ID:  NULL_CLASS_PTR_WRITE_c0000005_DOAX_VV.exe!Unknown

 

This only happens when I install the Costume Costumizer mod.

 

 

 

 

I have already tried different things and without results, is to put the mods and have a version higher than 22.5.1 of AMD and go all to hell, the current solution is not to update the AMD graphics driver, if someone has an AMD graphics with a driver higher than 22.5.1 and the game with mods and goes fine to tell me how to fix it.

[Fahrenheit 451]

I have a question.

Do you mean,  when you put the mods with an AMD graphic driver which is a version lower than 22.5.1, the game and mods normally work, right?

If it's so,  I'll try to replace the driver.

 

I guess my case is similar.

After I moved the mods into the PC with AMD graphic board from Intel's one, the game automatically close after clicking on the Title Page on DMM version.

If I remove "Mods" folder from "DOAX-VenusVacation" folder, the game starts normally and I can play it.

Then, I put  "Mods" folder back into "DOAX-VenusVacation" folder, I can use them, but they always return to be the default.

 

Then, I tried different things. After that, my mods totally don't work in the title page with many red error warnings, right now.

 

 

 

 

 

 

[blueblue555]

I don't know your hardware configuration at all, so I can't give you much advice.

 

Just for reference, I am using an RX6800 and have installed various mods and reshade with no problems.

I have been installing new device drivers every time for at least the last 2 years with no problems.

 

I recommend uninstalling the driver using DDU (DisplayDriverUninstaller) and installing the driver again.

 

Also, the error may be caused by a resident program you are using, so try to stop the resident program as well.

Install and check the mods one by one.

 

Check your environment carefully, including memory test and OS status. (e.g. MEMTEST86)

 

 

 

[Fahrenheit 451]

On 1/5/2023 at 11:20 AM, Fahrenheit 451 said:

I have a question.

Do you mean,  when you put the mods with an AMD graphic driver which is a version lower than 22.5.1, the game and mods normally work, right?

If it's so,  I'll try to replace the driver.

 

I guess my case is similar.

After I moved the mods into the PC with AMD graphic board from Intel's one, the game automatically close after clicking on the Title Page on DMM version.

If I remove "Mods" folder from "DOAX-VenusVacation" folder, the game starts normally and I can play it.

Then, I put  "Mods" folder back into "DOAX-VenusVacation" folder, I can use them, but they always return to be the default.

 

Then, I tried different things. After that, my mods totally don't work in the title page with many red error warnings, right now.

 

 

Thank you for your advice, blueblue555.

I replaced an AMD graphic driver to Version 22.5.1 in 3  days ago, and the mods are working limitedly.

 

I summarize my analysis for my case in below, in any case.

I'll continue to watch this condition.

 

 

Environment

・Graphic Board: Radeon RX 6750 XT

・CPU: Ryzen 7 5700X

・Mother Board:  B550 Phantom Gaming 4

 

These are bland new ones.

 

Application I installed: Windows, Virus Security, Google Chrome, DMM Game Player, and AMD Software꞉ Adrenalin Edition

                                    Therefore, the resident programs are only Windows, AMD and Virus Security.

 

I tried following things after I installed DMM Game Player, moved the mods folder, then finding they don't work.

・reinstalling Virus Security Soft which I used to use

・Downgrading Windows 11 to 10

・Running the game in the previous PC for confirming 

 

 

After I replaced the graphic board, I can only use them when I run the game in the first time.

Then, I try to rebooting the game, then the game automatically close after clicking on the Title Page on DMM version as same as before.

 

After that I try clearing all cashes, rebooting the application or even rebooting my PC, the above phenomenon is still remain. 

Edited January 8, 2023 by Fahrenheit 451

[hentaierooyaji]

Environment

・Graphic Board: Radeon RX 6800  ←　Geforece　3060ti

・CPU: Ryzen 9 5800X

・Mother Board:  B550 steel regend

 

お役に立てば　ややこしいので日本語で書きます

 

　RADEONに変えてＡＭＤ　Adrenalin　ドライバーインストール（たぶん最新）

　かなり不安定でたまに起動もしないので（エラーなし　ＤＭＭから進まない、落ちるなどなど）　doaxvv　ダイレクトX再インストール　→　エラーなし。MOD使える

　コスチュームカスタマイザーだけはだめ。タイトルまで問題なくいくも、ゲーム直前のほのかぴょんぴょん画面で強制落ち

　コスチュームカスタマイザーのいろいろヴァージョン試しましたが解決せず

 

　あきらめていましたが直りました。

　mod　manager1.4でやっちゃだめと言われている、一番上の3Dfix-DOAX　アップデート

　これで今のところ問題なく動いています。

 

　RADEONのみなさんと同じ原因かわかりませんが、ＡＭＤ信者に幸あれ。

[julian470]

My solution in the latest version of drivers has been this:
Before running the game, rename the Mods folder like this: DISABLED_Mods.
Then, to avoid deleting the mods settings, right click on the dxd3d file and check the read-only checkbox.

The second part of the story, with that done, I enter the game and click on main screen and once on startup I alt-tab and go to the game directory and rename the mods folder again, deleting the disabled part, go back to the game and press F10, and I already have the mods and I have not suffered any crash.

In case you want to change something of the mods configuration you have to uncheck the box of the dxd3d file and make the changes and press f10 and check again.

PS: I once did the DDU and AMDcleanup and verify the ram, for nothing.

Translated with www.DeepL.com/Translator (free version)

[Fahrenheit 451]

15 hours ago, julian470 said:

My solution in the latest version of drivers has been this:
Before running the game, rename the Mods folder like this: DISABLED_Mods.
Then, to avoid deleting the mods settings, right click on the dxd3d file and check the read-only checkbox.

The second part of the story, with that done, I enter the game and click on main screen and once on startup I alt-tab and go to the game directory and rename the mods folder again, deleting the disabled part, go back to the game and press F10, and I already have the mods and I have not suffered any crash.

In case you want to change something of the mods configuration you have to uncheck the box of the dxd3d file and make the changes and press f10 and check again.

PS: I once did the DDU and AMDcleanup and verify the ram, for nothing.

Translated with www.DeepL.com/Translator (free version)

 

Thank you for sharing your solution.

By the way, where can I find "dxd3d" file?  Is it in "DOAX-VenusVacation" folder?