TBD - LadyHorus Tera Armor Bodyslide

[Gameplayer]

View File

TBD - LadyHorus Tera Armor Bodyslide

---

Touched by Dibella Bodyslides for LadyHorus Tera Armors.

SkyrimSE and SkyrimAE versions

 

 

Requirements 

-Original Mod, 2.9 https://www.loverslab.com/files/file/3281-ladyhorus-tera-armor-for-uunp-females-and-vanilla-males-ver-29-4-9-2021/

-Convert Original mod to SSE with Nifconverter or similar program https://www.nexusmods.com/skyrimspecialedition/mods/4089

-Option, download preconverted meshes in downloads section.

-Option, download better textures here, https://www.nexusmods.com/skyrimspecialedition/mods/29398

-NOTE, I have not included textures here and you must have them, either download the original mod or go to high res download like above.

-SMP physics and CBPC physics installed

SMP Faster (I am using 1.3.8), https://www.nexusmods.com/skyrimspecialedition/mods/57339

CBPC (I am using 1.5.0), https://www.nexusmods.com/skyrimspecialedition/mods/21224

-HighHeeled Sounds Mod, https://www.nexusmods.com/skyrimspecialedition/mods/62502

-Aroused or similar such as Baka Aroused Mod, found on Loverslab or Patreon https://drive.google.com/file/d/1SlvS2KRY6UscQisro8GEskwCCKg4Wa3G/view

-Run Bodyslides

 

Description of Original Mod File,

 

There are over 40 armor outfits for both male and female characters containing a great selection of Heavy, Light, and Robe Outfits for adventuring characters that fit many themes.  Although many of the armors lean towards sexualized adventurer's, the outfits look really cool and epic in some cases.  At least half if not two thirds of the armors have actual skirt, cape, or cloth physics that are enabled by SMP physics systems which make the armors have flowing cloth much like what can be seen in modern games.  No more stiff capes or skirts that dont move properly in regards to gravity, in fact this may be the largest singular place to get a whole lot of armors for both sexes of characters in one place on the internet for Skyrim SE.  Caveet I am aware that on Korean sites this file has been provided for CBA however this files physics actually work properly where the other one did not.

 

The file makes use of both CBPC and SMP physics systems, I provided links above.  The CBPC controls the breast, butt, and belly physics, while SMP controls the skirts, capes, and other flair on the outfits to give them reaction to movement, collision with bodies, and gravity.  On SkyrimSE I have found that running both systems at the same time works really well much better than on SkyrimLE and this is on an old machine with several companions making use of many items besides such as SMP Hair for male and female character companions.  That said I suppose I should put a disclaimer that your results could vary compared to mine, if that is the case perhaps use less items or maybe refine your load order so your game runs better.

 

The ESP I have included has been altered too my taste, it is not required but it provides additional new features.

1) all high heels now have high heel sounds, (unfortunately this means male companions using male version of the items have heel sounds since male/female shares same ArmorAA record, can only segregate by race not sex with armorAA's unfortunately).

2) all the female armor now has 1st person arms,

3) all the armor (both male and female version) has "erotic armor" "pretty" keyword.  This means that male and female characters aroused values will increase a tad bit faster around characters wearing such armor and that other sexlab mods can react to characters wearing said armor appropriately to said mods conditions.

-I previously used "erotic" keyword but found that ordinarily sexually inactive characters were having extreme aroused values and thought that was not appropriate for general use.

4) Added some enchanted versions of the armor which can be made at a smithy with alchemy ingredients such as Frost, Fire, or Void salts.

5) Added a skirtless Vulnus armor which can be crafted at a smithy with the original Vulnus armor in the players inventory, this can also be backwards made to the original.

6) Added Frostfall Keywords (players dont need frostfall installed), players with Frostfall installed will have preset warmth and coverage values, this was done for sake of gameplay progression over realism and all values were eyeball balanced according to similar vanilla armor values so that players could just play the game rather than manage Frostfall, end result better tier armor equals better Frostfall resistance.

 

 

Suggested Download, Want Better Textures?

https://www.nexusmods.com/skyrimspecialedition/mods/29398

 

Short Description on how to install the original mod properly

 

 

Tool needed, you will need 7zip or WinRar or a similar program but the two I mentioned are completely free and possible to find on the internet without annoying extra's.

You also need to have at the ready a nifconverter I provided a link back up at top of this page its a simple exe program with easy prompt to follow so it should not actually require pictures I hope.

Simply put unpack the original mod to a folder on the desktop, if you are not going to use UUNP Bodyslide now is a good time to simply delete the Bodyslide in this folder since it contains stuff you will not use.  Place the nifconverter in the Data folder or in the folder next to meshes folder.  Activate the nifconverter a window pops open there will be some settings but luckily its already set for converting nif files so just hit go or activate the big button.  There will be a window a bunch of scrolling words then that window will ikely close.  So now there will be some logs in TXT files in your folder as well these tell you what nifs converted and did not....No worries, now clean up the stuff you dont need in there like the converter and the txt files.

Now pack the mod folder up with your 7zip/winrar tool and then install it like a normal mod into your mod manager.

After that install the Bodyslide files for TBD Tera Armor Bodyslide mod and then open bodyslide and make your armors.
_________________________________________________________________________________________________________________________________

For former Skyrim LE users, the idea of installing both HDT and SMP alongside each other in the same game is pretty crazy, but with the CBP and SMP both work really good in my game with SkyrimSE so no worries to top it off its actually only 2 file installations and no extra work either like it was with SkyrimLE!

 
I use FasterSMP file over on Nexus and also a CBP file provided by Touched by Dibella Mod by Milkdrinker, its the mod with the outfits look in the misc or optional files for it.  Just install them and there really should not be any other thinking needed for these, by far the easiest physics files to install ever really for a Bethsada game so far.

---------------------------------------------------------------------------------------------------------

High Heels Sounds and Aroused are both loverslab files its very easy to find these using a search engine with the "loverslab name of mod" should be your first hit result.  These files are easy to install so I figure you dont need my description.
 

---------------------------------------------------------------------------------------------------------

 

Trouble Shooting,

-IF on new Modern High End Hardware, you may notice that SMP will completely spaz out.

Solution, your FPS is crazy high and bounces by crazy high amounts reports show that on high end hardware players experience 90FPS jumping upwards of 210 FPS during gameplay, too correct the issue you will have to cap how high the FPS can actually go using your Graphics Card Control Panel find, "Maximum FPS" and then capping that way below the top possible FPS and experiment with values.   You may find capping the FPS at 120 FPS may resolve the issue if not select a lower number, using monitoring tools such as MSI Afterburner will be useful helping you determine a proper FPS value cap point.  When your FPS does not vary widely, you should find that physics and gravity in the game start behaving properly again.

 

The specific downloads I use for SkyrimSE pre-AE version that I got using a downloader tool for STEAM that is presently available on Nexus.

These pics are downloads of SMP,

Picture of CBPC,

 

 

 

 

Notes on Permissions,

I did look over LadyHorus permissions, and I did note that there was nothing that stated that bodyslide conversions could not be made, so here is a bodyslide conversion.

Also note that according to the terms, I did not upload this on Steam or Nexus.

Also this is a great place to store a backup of my Bodyslides were I can get to them later if needed.

And I am not claiming the original work as my own only the effort that I put into the making of the Bodyslides and the 1st person arms.

 

 

---

• Submitter
  Gameplayer
• Submitted
  04/24/2022
• Category
  Regular Mods
• Requires
• Regular Edition Compatible
  No

 

Edited July 13, 2022 by Gameplayer

[KillinCuzICan]

Files can't be opened, unfortunately.

[DARKPL4YERY]

Infelizmente o arguivo 001 está corrompido ?

[Gameplayer]

Just repacked the file into two parts by hand rather than have the zip software do it for me, should resolve the packing issue.

[KillinCuzICan]

6 hours ago, Gameplayer said:

Just repacked the file into two parts by hand rather than have the zip software do it for me, should resolve the packing issue.

Yep, that fixed it, thanks for this, they look great!

[Gameplayer]

So while playing some last night thought, I might just do all the armors in the pack in the CBP, because the SMP version has this breast gravity thing going on...Probably not anytime soon and likely just be a seperate download that comes later.

[Gameplayer]

Just uploaded a new version of the files,

 

Corrected a bunch of ZAPs.

Added some enchantment item versions of some of the gear I was using in the game and method to get them at the smithy station with some alchemy ingredients,

Added a Skirtless version of Vulnus Heavy Armor its made at the smithy with the skirted version....Of course you have to run bodyslide first so that the new armor is there.

 

Still have not tackled the high heels from Castanic Swimwear might not for some time,

Mostly just correcting stuff as I come across it in my game, getting the body zaps just right requires seeing them in the animations in the game so,

Right now Robes are in a good place.

Most Light Armor is doing fine looks good.

Have not played with the late game heavy armor stuff just yet but will get there on my Paladin character.

 

Was not sure if I was going to release these cause its not all the way played through and seen all of it in the animations but then well who knows, so here they are.

The Robes and Light armors are vastly improved and look great in the game now.

IF you see some clipping on Robes well at this point after 2 playthroughs and my constantly working them over I dont know what to say its probably unavoidable for some body types, they look great though.

[XarisZ]

Any plans for a 3BA version?

[Gameplayer]

5 hours ago, XarisZ said:

Any plans for a 3BA version?

 

No sorry, I dont play with 3BA installed.

As it is I have been making the sliders better simply by playing with the outfits in the game as I come to them in the progression.

 

I do have plans for the ESP file though, 

Going to change the way the keyword for Aroused is used, break that dependancy and it wont matter if the player has the mod or not Aroused will know its pretty armor.

Also I am considering adding the keywords for Frostfall in similar manner if the player has the mod they wont need to input values for warmth/coverage if I have read over the instructions correctly and understood them.

 

There is something that CBA user should bear in mind....Its not like UUNP where the use of TBD would break your CBBE textures completely its just a different slider in the CBBE group, uses same mapping.  So you can have both CBA and TBD in the same game right now and nothing breaks.

Edited May 23, 2022 by Gameplayer

[Gameplayer]

So what exactly am I doing at the moment, mod content wise?

 

Well I am currently playtesting a lot of the mods I had released last month, looking for things that I can tweak to make them even better.

Here is an example of my altering weight paints on the Boots in LadyHorus Tera Armors.

Now see how the boots worn on the right the kneepad does not bend back?  Well the kneepad of the boots always bending back sort of bugged me, its not natural and maybe its not something that a lot of players notice in their own games but I sure see stuff like this a lot.  Well after around having built the Book of UUNP a few years back and then playing un-modded games I sure see a lot of weight painting issues, of course some of it is likely not noticable by other players but when you have done thousands of bodyslides you start seeing these little irksome things about weight painting well everywhere and professional games are not immune to this "skill" of seeing errors.

 

I get that the back side of the boot does not morph in the animation on right, but that is not nearly as noticable as that kneepad which is a solid piece responding to the animation presented here, so its a good trade off because with this extreme bend of the knee we dont see the backside of the boots anyway.  Likely players will be using all sorts of sneak animations some not with as extreme kneebends but I assure you it will look a lot better after I get all these boots properly weight painted the way I like them.

 

I'm also considering creating a list of keywords for the armors without dependancy on other mods...I figured out that in the case of keywords that other mods respond too that the keyword just has to be named the same so there is no need of a dependancy.  So how does that matter, well for one I can remove aroused.esm dependancy and two I can just make a bunch of keywords for Frostfall and then tag everything without making Frostfall a master.  So if you have Frostfall you have no need to try to mess with the warmth rating on the armor because it will have the keyword for its warmth rating, if you dont have Frostfall your not effected.

 

 

 

[Gameplayer]

Updated the Files,

 

Altered a lot of boots so that the knee guard does not bend, noticed that LadyHorus herself had already done some of these so the original Tera pack was on its way to a high level of weight painting but not all the boots were covered and I got the rest.

 

Made corrections to Dreadwraith Chest piece, now the boobs dont clip and it supports 100% huge breast slider.

 

Removed ESP from the Bodyslide file part 1,

 

Now the ESP is in LadyHorus Tera SkyrimSE, along with the original meshes that have been converted to SkyrimSE formats.

 

Added "PrettyArmor" keyword to the ESP, but have not gotten around to adding this new keyword to all the chest pieces not to be mistaken with "PrettyArmor" keyword cause that is PrettyArmor Keyword from Aroused.  Once I have properly replaced the Keyword breaking dependancy on Aroused should be possible and players that do not use Aroused can use the file and players that have appropriate files that recognize "PrettyArmor" keyword will have appropriate reactions from their mods without a dependancy.

 

Plans,

I still plan on correcting some footwear but its quite tedious altering the foot to fit heels so I have not done some of the footwear.

 

I intend to add keywords for Frostfall compatibility without creating a dependancy on the file, this way whenever I or anyone else plays with the file there is no having to open the Frostfall MCM to change warmth/coverage values to make the mod playable....I will treat the armor near the same as the Vanilla game versions that the Tera Armor represents rather than follow realism given that the male and female outfits have different coverage and honestly I would rather just play the game rather than freezing when wearing armor that is equal to dwarf gear which in Frostfall has good warmth value.

 

Ultimately I intend to do what I can to really tweak out the file to make it a great addition to anyones game that happens to use TBD and I think the file really deserves that love due to all the nifty effects it has already and how it adds so much armor to the game for players to use and use on their followers.

 

Future Update,

Will have fixed up,

Manafire pregnancy belly will not have clipping at 100%

Cast H 20 Valor will have minimized clipping with its backskirt, only so much that could be done some animated standing idles will have some slight clipping other than that looks much better.

 

EDIT, 

I ended up figuring out that Aroused keywords cannot be injected into the ESP without causing a dependancy....Although Frostfall does have a method for injecting keywords without a Master/Dependant situation.  

Edited May 28, 2022 by Gameplayer

[Gameplayer]

So if you have been following along with my reports on what I am up to with this file,

 

Here is what to expect so far in the next update,

 

Manafire Heavy Chest peice, I went ahead and completely re-did this from scratch, opted to make it full CBPC, I prefer the gravity defying nature of the boobs for this physics type.  Also the pregnancy slider will not have clipping.

 

Event item Angel Shoes will now work properly,

Event item Castanic Swimwear Shoes will now work properly,

 

Will be working on some more shoes today, the issue was that these items have actual feet involved with their mesh so it was going to be a lot of work just for these items so I put them off and well I actually play the game while I do stuff for modding so I released the LadyHorus Tera stuff before the whole thing was finalized, did not know if I would be able to come back too it or how far along I would get it.

 

Anyway I'm knocking out some more of the footwear that has foot models in it.

 

_______________________________________________________________________________

 

Frostfall Keywords added to all items, went for tier progression rather than realism in regards to warmth and coverage.

Players do not require Frostfall to use this mods esp.

 

These changes were uploaded in file 1.0.4

Edited May 28, 2022 by Gameplayer

[Battle64]

Very happy to see LadyHorus's Terra Armor being converted over, even if it's only for TBD.  Been wanting a good conversion of this on SSE for a while now.  Hopefully this will inspire someone to then convert it to 3BA too.  

 

Anyways great job and cheers on the conversion!

[lol954]

YESSSSSSSSS THANKS IVE BEEN LOOKING FOR THIS!!!!!!!!!!

Edited July 6, 2022 by lol954

[lol954]

Hey i encounter an issues with the mod idk if its on my side but the breasts physic from some armors stay still. Ive installed all requirements, downloaded all 3 of your file and downloaded the textures from original mod version. Ive only installed the textures from original no esp or meshes. Then ive run trough bodyslide using batch files and making sure i select ALL armors. I think the lastest CBPC/ SMP or TBD update might have broken those armors?

Edited July 7, 2022 by lol954

[Gameplayer]

On 7/7/2022 at 5:44 AM, lol954 said:

Hey i encounter an issues with the mod idk if its on my side but the breasts physic from some armors stay still. Ive installed all requirements, downloaded all 3 of your file and downloaded the textures from original mod version. Ive only installed the textures from original no esp or meshes. Then ive run trough bodyslide using batch files and making sure i select ALL armors. I think the lastest CBPC/ SMP or TBD update might have broken those armors?

 

hmm, I will have to look at exactly the version numbers that I am using and get back to you.

 

I know I am on SkyrimSE preAE versions.

 

specific SMP faster, I am using

 

specific CBPC,

 

So both of these are available today!

 

Bear in mind that I am using SkyrimSE not the AE version....I downgraded my version using a downloader I got off of Nexus.

 

Not sure if its helpful at all...However I included them as pictures in the Trouble Shooting Section on the Downloads page and noted in the description the version numbers I use.

Again note that I am using a Pre-AE version of the game which is not at all uncommon for players wanting to use such mods as SkySA and Nemesis really awesome modern combat style mods for the game

Edited July 13, 2022 by Gameplayer

[lol954]

On 7/13/2022 at 5:46 AM, Gameplayer said:

 

hmm, I will have to look at exactly the version numbers that I am using and get back to you.

 

I know I am on SkyrimSE preAE versions.

 

specific SMP faster, I am using

 

specific CBPC,

 

So both of these are available today!

 

Bear in mind that I am using SkyrimSE not the AE version....I downgraded my version using a downloader I got off of Nexus.

 

Not sure if its helpful at all...However I included them as pictures in the Trouble Shooting Section on the Downloads page and noted in the description the version numbers I use.

Again note that I am using a Pre-AE version of the game which is not at all uncommon for players wanting to use such mods as SkySA and Nemesis really awesome modern combat style mods for the game

I have fixed it when i installed TBD - SMP and letting CBPC overwrite TBD - SMP files  

[GrndZero]

Found a weird issue. I was playing with the armors just fine. I decided I wanted to try something new and installed the Beyond Skyrim Burma and once I go to continue my save it states that the Lady Horus Tera is no longer available. I was like wtf. Closed game, looked at plugins, still there. So I reinstalled just in case, still the game is saying the esp is not there. I can see the files in bodyslide just fine but for some reason the game isnt loading the mod any longer. I saw no conflicts when I loaded Burma so I honestly do not know what would have cause the game to make the Tera Mod and only the Tera mod not be seen any longer especially considering i see it  in my load order.

Edit- I went so far as to disable the Burma and it still no longer shows the mod is loading.

Edited July 20, 2022 by GrndZero

[Gameplayer]

49 minutes ago, GrndZero said:

Found a weird issue. I was playing with the armors just fine. I decided I wanted to try something new and installed the Beyond Skyrim Burma and once I go to continue my save it states that the Lady Horus Tera is no longer available. I was like wtf. Closed game, looked at plugins, still there. So I reinstalled just in case, still the game is saying the esp is not there. I can see the files in bodyslide just fine but for some reason the game isnt loading the mod any longer. I saw no conflicts when I loaded Burma so I honestly do not know what would have cause the game to make the Tera Mod and only the Tera mod not be seen any longer especially considering i see it  in my load order.

Edit- I went so far as to disable the Burma and it still no longer shows the mod is loading.

 

This armor pack requires HeelSounds, if it is not activated in your load order the game wont load the armor pack.

 

There is no conflict with Bruma, not even possible so not worth thinking about.

 

Your inquiry is best suited in Technical Support thread.

 

They will want your Mod Manager name,

Your Load Order and your Mods List as these are two seperate things and not the same.

Some may want to look at your Papyrus Logs, although this is only useful for some people that are looking to see if you have baked in mods data for mods no longer in your game save....AKA the slow death of saves.

 

IF I had to take a stab in the dark here...I would say your game save is likely already Toast.

OR

You have gone over the ESM/ESP limit, surefire way for mods to just up and stop working, also will destroy your save game with file corruption.

 

But again this is not technical support and you did declare that the mod was in fact working before you installed Bruma....Meaning as far as I or anyone else who reads this the mod I have provided here is in working condition.

 

Now over in technical support, you will find people that have expertise that I do not have in identifying the issues you are facing and although I have often provide help in Technical Support I mostly stay in my lane of Meshes, Bodyslide/Outfit Studio, and ESP work...I steer well clear of scripting, which here on Lovers Lab we have an unusually high amount of people that understand scripting and coding.  I think your running into a scripting issue or hit your limit of EPS/ESM long before Bruma was installed not uncommon for modders to hit it eventually.

 

Wish you the best of luck, kind regards.

 

 

[Gameplayer]

So last year lost all my stuff to a flood,

Finally got all that in real life stuff sorted well mostly, one thing I ended up doing was building a better PC than I had.

Been playing around with SkyrimSE

Of course downloaded this file and early found that Vulnus did not have the skirtless version, so I built that version again or rather added the zap and entries again.

Added some more enchanted versions of robes, cause I was playing a mage.  You can get those with additem menu.

 

Finally updated the files.

 

Now uh if your wondering if I will update my Fallout 4 bodyslide stuff well that is going to be quite a ways off since I dont have much beyond Fallout 4 game installed on my PC.

Will take me a long while just downloading and installing the mods for it.

Just returning SkyrimSE how I like it took about 2 weeks.

 

Also uh I have new PC so I play a lot of games but building bodyslide stuff or fixing stuff up for a game I dont even have fully installed >< that takes a lot of time that I dont consider to be play time.

[RowdyD1313]

Just a heads up Manafire uses default TBD body. All others look good though.

[Gameplayer]

45 minutes ago, RowdyD1313 said:

Just a heads up Manafire uses default TBD body. All others look good though.

Manafire just redid that Monday and a catstanic light armor.

Prob upload them when get home

[Gameplayer]

Alright so, Im on a new PC since when I originally uploaded these.

 

High Elf heavy armor, Manafire should now have working sliders.

 

Castanic Light Armor, Twisted should now have working sliders.