Constant jiggling.

[Church the Cat]

Fairly recently, I've noticed all the female and male bodies have a constant jiggle, even when standing or sitting still. I'm using the Fusion Girl body for females and BodyTalk 3 for males, as I have for a couple years or so now. Any ideas, y'all?
I'll share a video of the issue, and my current load order.

LoadOrder_Fallout4_2024-05-11T23-14-53.txt

Edited May 12 by Church the Cat
Further investigation.

[Erebea]

It's happening as your frame rate is too high, lock it at 60 and the issue should stop.

[Church the Cat]

6 hours ago, Erebea said:

It's happening as your frame rate is too high, lock it at 60 and the issue should stop.

Thanks, for the reply. I just tried limiting the game to 60FPS, but the jiggle remains. Also, I'm using "High FPS Physics Fix".

Edited May 12 by Church the Cat

[Erebea]

So when you say "fairly recently" suggests that it worked in the past? So, when did it stop working?

 

At that time, did you change anything?

 

Have you looked over the high fps physics fix mod page, and confirmed that you've configured it correctly and that it is active?

[Church the Cat]

14 minutes ago, Erebea said:

So when you say "fairly recently" suggests that it worked in the past? So, when did it stop working?

 

At that time, did you change anything?

 

Have you looked over the high fps physics fix mod page, and confirmed that you've configured it correctly and that it is active?

I never altered any of the default settings in High FPS Fix, but I reinstalled it to be sure. Sadly, I still have the jiggles.

Edited May 12 by Church the Cat

[Erebea]

Well, what does your HighFPSPhysicsFix.log say?

[Church the Cat]

2 hours ago, Erebea said:

Well, what does your HighFPSPhysicsFix.log say?

Where do I find it?

[Erebea]

HighFPSPhysicsFix.log file will be in C:\Users\<username>\Documents\My Games\Fallout4\F4SE folder.

[Church the Cat]

5 hours ago, Erebea said:

HighFPSPhysicsFix.log file will be in C:\Users\<username>\Documents\My Games\Fallout4\F4SE folder.

Thanks, here it is...HighFPSPhysicsFix.log

[Erebea]

Okay, I'm not seeing a line for [Limiter] Framerate limit (game): ##. Check the ini file and that you've set the framerate cap for the game.

[Church the Cat]

20 hours ago, Erebea said:

Okay, I'm not seeing a line for [Limiter] Framerate limit (game): ##. Check the ini file and that you've set the framerate cap for the game.

Are you talking about the .ini file I attached to this post?

HighFPSPhysicsFix.ini

[Erebea]

Yes, but that may have been a misunderstanding on my part, you've set the fps to disabled I take it?

 

You have installed all the requirements? If that isn't working still, while a long shot, maybe it is the body physics preset you are using?

[Church the Cat]

17 hours ago, Erebea said:

Yes, but that may have been a misunderstanding on my part, you've set the fps to disabled I take it?

 

You have installed all the requirements? If that isn't working still, while a long shot, maybe it is the body physics preset you are using?

 

May 14, 2024

1. I had a chat with another user on Discord, and they gave me a workaround that seems to have fixed the issue. I've still no idea what caused my issue to begin with, but I'm happy to just get back to playing. Thanks, for your assistance. I'll share the transcript of my conversation with the other user on Discord below, so it might help out whomever might stumble on this thread with a similar issue. Thanks again. 😸

   Tormante — 05/13/2024 1:10 PM

   personnaly, i set breastgravity to 15 or 20 (50 originaly) and it stop the ultra-jiggling thing

    

    

    

    
2. [1:11 PM]

   in the ocpb config

    

    

    

    
3. Tormante

   personnaly, i set breastgravity to 15 or 20 (50 originaly) and it stop the ultra-jiggling thing

    

   Church — 05/13/2024 1:15 PM

   Thanks for the reply, how would I set that?

    

    

    

    
4.  

   Tormante — 05/13/2024 1:22 PM

   data/f4se/plugins/ocpb.ini

    

    

    

    
5. [1:22 PM]

   under the section [breast]

    

    

    

    
6. [1:23 PM]

   the line name: gravitybias

    

    

    

    
7. [1:23 PM]

   set to 30 in my game actually
8.  

    

    

    
9. Tormante

   under the section [breast]

    

   Church — Yesterday at 12:14 AM

   Sorry for the slow response, I've been at work all day. I found it, this is what mine looks like. I also noticed there's a number of the [Breast] sections, up to four, as well as four [Breast.A] sections. Do I need to change anything with them as well? [Breast] stiffness=7.5 stiffness2=15.0 damping=1.8 timetick=4.0 timeStep=0.020 maxoffsetX=20 maxoffsetY=20 maxoffsetZ=20 linearX=0.2 linearY=0.2 linearZ=0.3 rotationalX=0.15 rotationalY=-0.15 rotationalZ=0.025 cogOffsetX=15.0 cogOffsetY=15.0 cogOffsetZ=-15.0 gravityBias=50.0 gravityCorrection=8.0 rotateLinearX=0.0 rotateLinearY=0.0 rotateLinearZ=0.0 rotateRotationX=0.0 rotateRotationY=0.0 rotateRotationZ=0.0 absRotX=0

    

    

    

    
10. [12:16 AM]

    Actually, I would like to copy whatever yours shows, since you're happy with it. Would you share your ocbp.ini here for me to copy? (edited)
11.  

    Tormante — Yesterday at 12:26 AM

    I touch nothing except "gravityBias=50.0", and make it "gravityBias=30.0"^^
12. @Church

    Actually, I would like to copy whatever yours shows, since you're happy with it. Would you share your ocbp.ini here for me to copy? (edited)

     

    Tormante — Yesterday at 12:28 AM

    I know for sure that sometime when i re-re-reinstal all my mods, i have to put it to 15.0, and now it on 30.0, and it works fine for me
13. @Church

    Sorry for the slow response, I've been at work all day.  I found it, this is what mine looks like. I also noticed there's a number of the [Breast] sections, up to four, as well as four [Breast.A] sections. Do I need to change anything with them as well? [Breast] stiffness=7.5 stiffness2=15.0 damping=1.8 timetick=4.0 timeStep=0.020 maxoffsetX=20 maxoffsetY=20 maxoffsetZ=20 linearX=0.2 linearY=0.2 linearZ=0.3 rotationalX=0.15 rotationalY=-0.15 rotationalZ=0.025 cogOffsetX=15.0 cogOffsetY=15.0 cogOffsetZ=-15.0 gravityBias=50.0 gravityCorrection=8.0 rotateLinearX=0.0 rotateLinearY=0.0 rotateLinearZ=0.0 rotateRotationX=0.0 rotateRotationY=0.0 rotateRotationZ=0.0 absRotX=0

     

    Tormante — Yesterday at 12:29 AM

    [Breast] stiffness=7.5 stiffness2=15.0 damping=1.8 timetick=4.0 timeStep=0.020 maxoffsetX=20 maxoffsetY=20 maxoffsetZ=20 linearX=0.15 linearY=0.015 linearZ=0.25 rotationalX=0.125 rotationalY=0.275 rotationalZ=-0.0475 cogOffsetX=15.0 cogOffsetY=15.0 cogOffsetZ=-15.0 gravityBias=30.0 gravityCorrection=8.0 rotateLinearX=0.0 rotateLinearY=0.0 rotateLinearZ=0.0 rotateRotationX=0.0 rotateRotationY=0.0 rotateRotationZ=0.0 absRotX=0

     

     

     

     
14. [12:30 AM]

    Generaly i test with 50.0, then return to make it 40.0, etc, until i'm satisfied
15. [12:31 AM]

    With 30.0 sometime the wind make the thing move, but i usualy play in diamond city soooo it's not a big deal. When i'm on a playthrough where i actualy play the original game with more "option", i go for 20.0.
16. Tormante

    I touch nothing except "gravityBias=50.0", and make it "gravityBias=30.0"^^

     

    Church — Yesterday at 12:34 AM

    Okay, so I shouldn't mess with [Breast2], [Breast3], [Breast4], [Breast.A], [Breast2.A], [Breast3.A] or [Breast4.A]?
17. Tormante

    With 30.0 sometime the wind make the thing move, but i usualy play in diamond city soooo it's not a big deal. When i'm on a playthrough where i actualy play the original game with more "option", i go for 20.0.

     

    Church — Yesterday at 12:39 AM

    Ah, okay. I normally play through the questlines, so I wander the world. Assuming I'm understanding correctly, since I don't want her tits to be blowing in the wind, I should increase the gravityBias?

     

     

     

     
18. @Church

    Ah, okay. I normally play through the questlines, so I wander the world. Assuming I'm understanding correctly, since I don't want her tits to be blowing in the wind, I should increase the gravityBias?

     

    Tormante — Yesterday at 12:41 AM

    decrease, for less jiggling for nothing^^

     

     

     

     

19. Church — Yesterday at 12:41 AM

    Oh, lower numbers jiggle less?

     

     

     

     
20. @Church

    Okay, so I shouldn't mess with [Breast2], [Breast3], [Breast4], [Breast.A], [Breast2.A], [Breast3.A] or [Breast4.A]?

     

    Tormante — Yesterday at 12:41 AM

    one time i do that, and see no change
21. @Church

    Oh, lower numbers jiggle less?
    
    Tormante — Yesterday at 12:42 AM

     

    Yes, less effect of gravity on the boobs so they don't want to go down for nothing, and stop jumping because of wind or because your character breath

     

     

     
22. Tormante

    one time i do that, and see no change

     

    Church — Yesterday at 12:43 AM

    Ah, okay. I'll stick to only editing [Breast], then.
23.  

    Tormante — Yesterday at 12:44 AM

    hope it work for you, it's my magic trick since 3 years
24. Tormante

    hope it work for you, it's my magic trick since 3 years

     

    Church — Yesterday at 12:45 AM

    I'll experiment and see how it goes, thanks for your help. 

     

     

     

     
25.  

    Church — Yesterday at 2:46 AM

    Looks like my magic number was 25. Now, they no longer quiver like a cold chihuahua. 

[Erebea]

You're welcome, and glad the discord user was able to help you in the end. Thanks for the update on how you resolved the issue.