The folder containing the necessary xml should be pasted into the path
skyrim\data\skse\plugins\hdtSkinnedMeshConfigs

NifSkope_2_0_2016-04-20.7z

BHUNP.rar

First download Nifscope and install it, then open it.

Once the programme has started, go to File and then Open

Follow this path  skyrim\data\meshes\actors\character assets and import our femalbody_1

At this point, we need to import our SMP select Block List right-click on 0NiNode to open the menu, then Block and then Insert, confirm and a drop-down menu will appear

in the new menu select Nis... and then NiStringExtraData

we will then find ourselves on a new page. At this point, we need to modify the two strings. 

Right-click on the first string and edit the content

We copy this text into the string

HDT Skinned Mesh Physics Object

We confirm and do the same on the second string, in which we will insert this text

SKSE\Plugins\hdtSkinnedMeshConfigs\BHUNP\BaseShape.xml

This is what we have to achieve

Select Block Detail and click on 0NiNode to extend the menu.

Double click on Num Extra Data List and change the value from 0 to 1

Then double click on Extra Data List to open the string in which we will edit the value from 0 to 1.

Save the work and test it in game. 

That's all, if there are any points that are not quite clear please write, I will answer as soon as possible.

If we have body parts in our Shape, presets are not necessary.

As shown in the screen, the body is already present, what we have to do now is to modify the parts that interest us, I have chosen to act on the breast by enlarging it by acting on a few parameters. Once you have made your settings, take note of the modified parameters, as they will be needed later on.

When we are satisfied, we can create the body by clicking on Build

Having created the body, let's act on the hands and feet. In these two steps we will not touch the parameters, they will be perfectly adapted to the body.

In the example video, I show the results obtained. As you can see, the body, hands and feet are perfectly aligned and without cuts.

Having reached this point and made sure that everything is perfect, we can act on the dress or armour. I chose this one

As we can see, the part affected is not the same as the body we have created, so, as mentioned above, we are going to act on the breast parameters. Finally, click on build

As we have seen, the change is considerable, the alteration of the parameters remain permanent.  If we also have gloves and boots or leggings in our suit or armour, we import them into Bodyslide as we did for our hands and feet. Again, we will NOT act on the parameters

A screen and a video show the results obtained.

That is all. I would like to remind you that the same steps can also be carried out in reverse, i.e. by altering the parameters to the suit or armour if we are using a standard body. The parameters must be the same. 

Perhaps not everyone knows that you can create your own animations, i.e. combine them with others. What matters is that they are placed in the right place and, of course, that you use FNIS every time. Let's face it, Skyrim's stealth animations are terrible, the initial pose alone is unwatchable.
So, I decided to replace it and match it with a sexy movement for women. In the demo video I used these two mods

UNDERDOG - Animations     GSPoses & SLA
 

It happened to me and I didn't understand what it was. Searching on the internet, I found the solution. This is called a draugher bug, it strikes indiscriminately and at any time. It doesn't damage the game but is just annoying. So how do you fix it? Well, with an item to equip. You can easily download it from here

https://www.nexusmods.com/skyrim/mods/62798?tab=description

How does it work? As mentioned, it is an item of equipment. When you happen to be a victim of this bug, you simply equip the item and then remove it. The bug will disappear.
It works, tried and tested.

https://www.nexusmods.com/skyrim/mods/105547?tab=description

In this topic, I will explain how you can change the textures of the cards with the help of a photo retouching programme such as Photoshop or Gimp.

The first thing we need is the program and the DDS File plug-in. Second, the mod and program to open BSA folder.

The texture creations, will work on any version of the mod. Using the contents of the BSA file that you will find within the minigame, you can replace the cards without damaging the mod.

(under spoilers, an example of the textures)

First, download the BSA Browser programme downloadable from here

https://www.nexusmods.com/skyrim/mods/1395

Once the programme has been installed, we open our BSA

We will get this page. Select all textures (DDS) and PNG which are the textures of the minigame rule book
and we will have the folder on a path of our choice

The routes we will have obtained will be as follows:
folder\texture\clutter\triple_triad_skyrim in which, we will also find the previously extracted PNG

Once the content of the textures has been extracted, close BSA Browser, open your photo editing programme (Photoshop in my case) and load a texture.

Our first card is ready for the changes we want to make. 

However, there are several things to take into account.
Firstly, always duplicate the base layer, this is necessary to avoid mistakes on the original texture. 
Second, DDSs should NEVER be modified in their total size (e.g. 1024x1024px). Within that, you can do what you like. Third, when you have created one, keep a copy of the PSD file that the program will ask you to save, this step is important in case you want to modify them again.

Another detail, cards should NEVER be changed to their original name, if you do this, the mod will not recognise the new textures. So create (if you want) a new folder where you will put your new cards. As for the NPCs for the book, you can make them from the DDS, just make a copy of them saved as NPCs which you will then adjust on the book.

Once all the work is done (which is quite long), the folder called triple_triad_skyrim containing the new textures will be placed in this path
Skyrim\data\textures\clutter 

(If you don't have the clutter folder, create it.)

That's it as far as card textures are concerned.
But, after these, you will need to create another one, namely card_n_dds.
How do you do this?

What kind of texture is it? The one that gives depth to all your cards. Let's see how it's created

To create this texture is not complicated, all we need is the background of any DDS of our cards. Saving will be done as a D3D/DDS to which we will then make our modifications.

One last thing before closing, when you create your cards, it is not necessary to create a new PSD each time, you only need one in which you can insert the one you like best.

That's all, if there are any points that are unclear or that you have not understood, please write to us. Until next time

I think several times and what do we do? Obviously, we look for textures. But, as in this case, the textures are not there. And that's where Racemenu and Showracemenu Alternative come in.
Honestly, I prefer the latter to the former because I can get into it whenever I want without using the keyboard.

Let's see together how it works

First of all, we strip our character and enter racemenu, zoom out a little if you like

At this point, let's move to the body dye slider, as shown in the image below

Some might ask, what are we doing here? Simple, we act on the colours of the body. How?

At this point, all that's left to do is to go back to colouring the skin evenly over the whole body simply click on the colour and change it as you wish

In the screen below, the final result

That is all. Simple, isn't it? For any explanations or passages that are not understood, please leave your comments within this tutorial.

Thank you for your vision