Jump to content

Recommended Posts

I hadn't installed the mod yet, that's why. xD Much thanks! I didn't see his name in the front page, so I didn't know he had one. <3 Downloading.

 

:dodgy:

next time....use a mod before making suggestions.....please.

i don't have time to track down missing files that are not missing in the first place.

Link to comment
  • 5 weeks later...

I'm having a bit of confusion on how to actually install this with mod organizer

 

do i go with default at first? is there any way to register the other ones as variations somehow?

 

I'm guessing there's no framework yet on actually making the dragons get aroused but start as unchanged?

Link to comment

I'm having a bit of confusion on how to actually install this with mod organizer

 

do i go with default at first? is there any way to register the other ones as variations somehow?

 

I'm guessing there's no framework yet on actually making the dragons get aroused but start as unchanged?

 

the mod is not setup to be used with mod installers.

 

DEFAULT will make the dragons permanently aroused, but with unique dicks for different dragons.

 

EXTRA STUFF AND ALTERNATIVES is stuff you can add to DEFAULT to change some dicks.

 

SLMNC is for the framework you are looking for ( http://www.loverslab.com/files/file/1140-more-nasty-critters/ ), but the dragons will all use the same dick.

DON'T install DEFAULT if you want to use this.

Link to comment

So if I want this to work with MNC, I should install everything from the SLMNC folder and *not* use anything from the Default folder? And add the alternatives I want to the SLMNC folder? 

 

Do I need to do anything with the subfolders in the SLMNC folder? 

 

you use ONE of the 3 files in the SLMNC folder.

eg: you drag and drop the contents of "DogDrag" (meshes & textures) into skyrim's data folder and it will replace the MNC dick with a dog style dick.

 

"EXTRA STUFF AND ALTERNATIVES" is for "DEFAULT" only.

Link to comment
  • 2 weeks later...

Hey there,

 

Question I do not see any schlongs, dicks, penises (or whatever term you prefer) appear on the dragons. Meaning any dragon. I have no idea what might cause this issue and I would appreciate if you could help me figure out what I might be missing or forgetting etc. 

 

The animation works fine it's just the mesh of the penis I can't seem to find any mod associated in Creature Framework as well. Any leads?

 

Thanks in advance and sorry if I'm being vague I'm quite new to troubleshooting with mods and I really like to get your mod working because from what I saw it looks amazing. 

Greetz

Link to comment

Hey there,

 

Question I do not see any schlongs, dicks, penises (or whatever term you prefer) appear on the dragons. Meaning any dragon. I have no idea what might cause this issue and I would appreciate if you could help me figure out what I might be missing or forgetting etc. 

 

The animation works fine it's just the mesh of the penis I can't seem to find any mod associated in Creature Framework as well. Any leads?

 

Thanks in advance and sorry if I'm being vague I'm quite new to troubleshooting with mods and I really like to get your mod working because from what I saw it looks amazing. 

Greetz

 

first thing, what file are you trying to use?

DEFAULT or SLMNC

 

and please tell me that you are NOT using a mod installer/manager, they have never worked right with my mods.

Link to comment

using nexus mod manager wont install it .

i have try it manualy , it work but the original dragon penis is here too , double dragon penis lol

 

the creature framework has a MCM setting to turn off the original one.

 

 

i am beginning to think that i need to upload a tutorial with pictures.....

Link to comment

I downloaded the mod, placed it in the right places, but the dragons just walk on top of each other... I did download the source for the animations but I honestly got NO idea where to put that. Please help.

 

did you run "GenerateFNISforUsers.exe"? and register the animations in SLAL?

 

the source files are the original 3dsMax files before they got converted by Havok into Skyrim compatible HKX files.

unless you are planing to make your own animations and have 3dsMax 2010, they are useless to you.

Link to comment

This is the strangest thing. Before adding this mod I had FNIS installed. I'm pretty sure I ran the generation tool as well, searching FNIS in my Skyrim folder pulls up several text files that include generated in them. I've even registered the animations I want to see with MCM ingame but it doesn't seem to change it.

EDIT: I went through and ran the FNIS generation tool just to make absolutely sure of it and for whatever reason it just doesn't play the animations even after. They just walk on each other and that's it. Also I don't know if it's this mod or what but there's one that includes animations for other creatures, sabrecats for instance, going at it as well but it doesn't even play those.

Link to comment

 

 

have you tried using sexlab tools?, its needed to make some animations work:

http://www.loverslab.com/files/file/2018-sexlab-tools-v30/

 

how to use it:

1. start the animation with MatchMaker: http://www.loverslab.com/files/file/163-sexlab-matchmaker-updated-09172014/

2. have one of the dragons in the crosshairs

3. press N on the keyboard, and select "Control Animation"

4. Press H on the keyboard, and select the animation you want.

 

and make sure you have the needed/recommended mods:

Skyrim Script Extender (SKSE)

http://skse.silverlock.org/

Fores New Idles

http://www.nexusmods.com/skyrim/mods/11811/

SkyUI

http://www.nexusmods.com/skyrim/mods/3863/

SexLab

http://www.loverslab.com/files/file/150-skyrim-sexlab-sex-animation-framework-v161b-updated-jan-7th-2016/

More Nasty Critters (recommended)

http://www.loverslab.com/files/file/1140-more-nasty-critters/

Creature Framework (the one with MNC is outdated)

http://www.loverslab.com/files/file/1622-creature-framework/

JContainers (the one with MNC is outdated)

http://www.nexusmods.com/skyrim/mods/49743/?

SexLab Animation Loader

http://www.loverslab.com/files/file/2488-sexlab-animation-loader/

MatchMaker

http://www.loverslab.com/files/file/163-sexlab-matchmaker-updated-09172014/

UIExtensions

http://www.nexusmods.com/skyrim/mods/57046/

SexLab Tools

http://www.loverslab.com/files/file/2018-sexlab-tools-v30/

Link to comment

I'm pretty sure I have all of that installed. Some before I even found out about this mod.
Sex Lab, Tools, AL, Creature Framework, UIExtensions, MatchMaker, SkyUI, FNIS, MNC... all of them as far as I know. I'll try it again but I just wish I knew what was going on.

Edit: Just as a heads up, I do the begin scene with the match maker interface since the spell doesn't work on the dragons. I open it with C, select them both and set them accordingly... I'll try what you suggested.

Edit 2: Tried with the Hentai Dragons and they either walk on each other, sink into the ground or float into the sky, and if I end it and banish one of them the other floats into the sky and starts spinning. I tried to use the control animation key but it didn't change anything.

Link to comment

I'm pretty sure I have all of that installed. Some before I even found out about this mod.

Sex Lab, Tools, AL, Creature Framework, UIExtensions, MatchMaker, SkyUI, FNIS, MNC... all of them as far as I know. I'll try it again but I just wish I knew what was going on.

 

Edit: Just as a heads up, I do the begin scene with the match maker interface since the spell doesn't work on the dragons. I open it with C, select them both and set them accordingly... I'll try what you suggested.

 

Edit 2: Tried with the Hentai Dragons and they either walk on each other, sink into the ground or float into the sky, and if I end it and banish one of them the other floats into the sky and starts spinning. I tried to use the control animation key but it didn't change anything.

 

have you tried resetting the animation registry and re-adding the SLAL animations to the registry?

note: make sure you hit the add to registry button.

 

do you have "Allow Creature Animation" checked in SexLab's animation settings?

 

have you tried unchecking "Disable Starting Teleport" in SexLab's animation settings?

 

Link to comment

I can't upload the screenshots I have taken recently but I turned off the teleport option in the settings. Tested it with three different animations.

Dragon on Dragon animation the dragons either walk on top of each other and head in different directions or stand inside each other not doing anything. Dragon Masturbation, nothing happens, the scene doesn't even start.

Horse on Horse, the horses stand inside each other, and don't do anything. Console says animation has started and that stages are changing, but nothing happens visibly.

Deer/Elk on Deer/Elk the two grow in size for whatever reason but it doesn't seem to do anything visibly either despite the console confirming that the animation has started.

I have attempted to control the animation and have been using the match maker set receiver/actor option. Doing this to try and make it work, the console confirms the animation starting and the stages changing, but visibly I'm getting nothing. Rebuilt the SLAL animation list, updated the dragon animations and the other animations, minus things involving the player, in the loader and it was confirmed to have worked, but it didn't seem to fix it.

Link to comment

.

 

if none of this helps fix your problems, then i don't know how to fix your problems.

 

1. in my opinion, Mod Managers should be avoided like the plague, they never overwrite files in the right order,

or they install files to the wrong location, and often fail to remove all parts of a mod or remove parts from another mod when you hit the uninstall button.

 

2. when you start the game with the skse loader the list of installed mods wont get refreshed, so if you install a mod and just start the game with the loader any new mods you installed wont be fully activated.

to fix this problem go to the skyrim launcher and click on "DATA FILES" and it will refresh the list of installed mods, you can now close the launcher and start the game with the skse loader.

 

3. rerun the GenerateFNISforUsers.exe

 

4. go to SexLab's or Animation Loader's MCM menu and click on rebuild animation registry, unpause the game and Wait a Minute for the registry to reset, then re-enable the animations in the Animation Loader and make sure you click on the add to registry button.

 

5. make sure you have "Allow Creature Animation" checked in SexLab's animation settings.

 

6. if you are having nonstop walking problems with the dragons try unchecking "Disable Starting Teleport" in SexLab's animation settings.

 

7. with some creature only animations you will need to use SexLab Tools for them to run correctly: http://www.loverslab.com/files/file/2018-sexlab-tools-v30/

 

8. try loading a older save file from before sexlab was installed.

 

9. "if you leave the match creature gender option enabled the animations don't load either.....don't know why excatly but it's always a good idea to see if that option is causing problems too." - Dravus

its because most creatures don't have female counterparts in skyrim by default.

Link to comment
  • 2 weeks later...

I think I did use NMM however I tried installing it manually and I tried to install both files. (note not at the same time ofc) Neither the default nor the SLMNC is working as it should.

 

It just looks as if the mod isn't installed at all.

What could cause this issue?

 

 

Hey there,

 

Question I do not see any schlongs, dicks, penises (or whatever term you prefer) appear on the dragons. Meaning any dragon. I have no idea what might cause this issue and I would appreciate if you could help me figure out what I might be missing or forgetting etc. 

 

The animation works fine it's just the mesh of the penis I can't seem to find any mod associated in Creature Framework as well. Any leads?

 

Thanks in advance and sorry if I'm being vague I'm quite new to troubleshooting with mods and I really like to get your mod working because from what I saw it looks amazing. 

Greetz

 

first thing, what file are you trying to use?

DEFAULT or SLMNC

 

and please tell me that you are NOT using a mod installer/manager, they have never worked right with my mods.

 

 

Link to comment

 

I think I did use NMM however I tried installing it manually and I tried to install both files. (note not at the same time ofc) Neither the default nor the SLMNC is working as it should.

 

It just looks as if the mod isn't installed at all.

What could cause this issue?

 

 

i would assume you installed it wrong, if using default try entering "dragonohdaviing.nif" into your computer's search bar,

the file path should look like this:

C:\Games\Steam\SteamApps\Common\Skyrim\Data\meshes\actors\dragon\dragonohdaviing.nif

or this:

C:\Program Files (x86)\Steam\SteamApps\Common\Skyrim\Data\meshes\actors\dragon\dragonohdaviing.nif

 

and you should only see one dragonohdaviing.nif

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. For more information, see our Privacy Policy & Terms of Use