PsychoMachina Posted June 15, 2013 Author Share Posted June 15, 2013 I uploaded the main Monli race pack to the OP. This does not contain the female body (meshes/textures). You will need to install one of the loli bodies and textures. Installation is the same as with the adult Monli with the exception of the PreCache Killer and CME corrections, both I have included. Don't forget that when using Cute Designs, you only need the BSA file. Only use the plugin if you have the Ashen race installed. ADDITIONAL: I'll see about making some presets and post them sometime this weekend. Link to comment
little_sephy Posted June 15, 2013 Share Posted June 15, 2013 Thanks, I finally got it to work now. Just curious though about the texture packs you uploaded. I'm definitely going towards what you got going in your signature pic, and i think you said you used Pretty Body for the body, and Sophia for the face? I found Sophia's face option in the pretty girls texture pack, but what about the body itself? I don't see any "pretty body" options in either, unless it was also sophia for that one? I'm a little slow obviously EDIT: Scratch that, i found the file. I feel stupid for not looking at the bottom of part 1, my mistake. Thanks for uploading the main file tho! Link to comment
babisata Posted June 15, 2013 Share Posted June 15, 2013 HMm im haveing some trouble fixing the first person cam to fit the height of my character any suggestions on what to do? Been trying to change 1st person skele.nif to an other for child races did not work. Allso tried to modify cam in skyrim ini. Did not work and i even went as far to modify cam in SKSE Monli ini still nothing so im a bit lost atm. Link to comment
little_sephy Posted June 15, 2013 Share Posted June 15, 2013 I'm having a minor issue with the models i think. Whenever I try to take off my characters armor, the game immediately crashes. Is there an issue with the character model? I installed the Pretty Body, and Sophia face and did everything correctly, but anytime i take off clothing it crashes. I have CBBE slim installed with the proper body and everything. Link to comment
PsychoMachina Posted June 15, 2013 Author Share Posted June 15, 2013 HMm im haveing some trouble fixing the first person cam to fit the height of my character any suggestions on what to do? Been trying to change 1st person skele.nif to an other for child races did not work. Allso tried to modify cam in skyrim ini. Did not work and i even went as far to modify cam in SKSE Monli ini still nothing so im a bit lost atm. I've done the same with no success. I'm working on a solution. I'm having a minor issue with the models i think. Whenever I try to take off my characters armor, the game immediately crashes. Is there an issue with the character model? I installed the Pretty Body, and Sophia face and did everything correctly, but anytime i take off clothing it crashes. I have CBBE slim installed with the proper body and everything. Did you install the CBBE Petite body and either the non-TBBP or TBBP skeleton? The crashing when removing the clothes is caused by having the wrong skeleton. The one that is included with the main race pack is an adult scale skeleton. You will need to replace it with the skeleton that comes with the Petite body. The Pretty Girl body textures are for higher-end systems. If you don't have enough memory or powerful enough graphics card and you want to copy my Monli, I suggest changing the body/head textures to Sophia which is included in the texture pack that includes the screenshots. Link to comment
little_sephy Posted June 15, 2013 Share Posted June 15, 2013 Yeah, I installed the main pack first for the basic adult textures. Then I installed the CBBE body you listed below the newer textures you put up for the smaller skeleton. After that, I used the Body textures you used from the 3rd pack, the Pretty Body Main files, and then the Sophia Face files. I have a pretty high end video card, it's a Nvidia GeForce 550Ti so I definitely have enough power there for sure, i don't know why my skeleton would be messing up when i obviously put the loli one in there, not the adult. My character is definitely small, if my skeleton was adult size then i'd be taller off the bat right? Link to comment
PsychoMachina Posted June 15, 2013 Author Share Posted June 15, 2013 I have a 560TI and the Pretty Girl textures will work fine for awhile then I get the black body. Once I replace them with something else, the problem goes away. What armor were you using that caused the CTD? Link to comment
little_sephy Posted June 15, 2013 Share Posted June 15, 2013 Since it was only the beginning of the game, it was first the rags your given right off the bat. I ended up switching to the Empire armor you get after that, and it still crashed after trying to take that off too. I'm really not sure why it's happening to me. I might consider scrapping my whole directory and starting over again. Link to comment
PsychoMachina Posted June 15, 2013 Author Share Posted June 15, 2013 Give me a moment and I'll put together a body/texture set for you to try out. Link to comment
PsychoMachina Posted June 15, 2013 Author Share Posted June 15, 2013 Give this a try. It's what I have installed: CBBE Petite + TBBP skeleton + Sophia texture set. Sophia_CBBE Petite-TBBP.7z I suggest installing this manually. Link to comment
little_sephy Posted June 15, 2013 Share Posted June 15, 2013 It worked perfectly! Thanks for the fix, it totally helped ^^ Link to comment
PsychoMachina Posted June 15, 2013 Author Share Posted June 15, 2013 Great! The problem was something didn't get installed the first time. Link to comment
little_sephy Posted June 15, 2013 Share Posted June 15, 2013 Could be my fault, I'm terrible at this stuff I suppose. It's all so...technical haha. I can't even edit characters faces properly to look as gorgeous as other's, i just don't know how people do that either :3 Link to comment
PsychoMachina Posted June 15, 2013 Author Share Posted June 15, 2013 UPDATE I made some adjustments to the Monli in an attempt to fix the 1st-person camera. As a result, she is smaller (can still peak over a table) and the 1st-person camera is lower than an adult. It's not perfect, though. It would seem the game just won't allow camera heights to be too low or at least not when you want it to be. I'm sure if you do not want the height too low, the game will make it lower. @Little_Sephy Experiment, try new bodies and textures, and tinker with the ECE sliders. Eventually you'll make something you really like. Link to comment
Koko.Hekmatyar Posted June 15, 2013 Share Posted June 15, 2013 Have you considered making Monli followers both normal and young? I like the race but there are times I think I'd rather have one as a follower then playing one/ Link to comment
babisata Posted June 15, 2013 Share Posted June 15, 2013 UPDATE I made some adjustments to the Monli in an attempt to fix the 1st-person camera. As a result, she is smaller (can still peak over a table) and the 1st-person camera is lower than an adult. It's not perfect, though. It would seem the game just won't allow camera heights to be too low or at least not when you want it to be. I'm sure if you do not want the height too low, the game will make it lower. Great job there! It feels way more realistic now :3 Link to comment
PsychoMachina Posted June 16, 2013 Author Share Posted June 16, 2013 Have you considered making Monli followers both normal and young? I like the race but there are times I think I'd rather have one as a follower then playing one/ I'm working on some skeletons for Dual Sheath Redux then I'll start on followers and npc replacers. I thought the Monli's were always young and some are just...more developed than others. Link to comment
Koko.Hekmatyar Posted June 16, 2013 Share Posted June 16, 2013 NPC Replacers could be fun I'd love to see Lydia as a Monli that would be hilarious. Link to comment
PsychoMachina Posted June 16, 2013 Author Share Posted June 16, 2013 Housecarls are definitely included. I'm not that far into the game and haven't been to Solitude and Riften, yet. So much to do. Link to comment
PsychoMachina Posted June 16, 2013 Author Share Posted June 16, 2013 Added a copy of the 1st-person skeleton for vanilla races and adult-size playable races. Install this skeleton only if the modified (lower camer height) skeleton for the loli Monli is causing the 1st-person camera to be lower for your adult playable characters. Added link to the DOWNLOAD - Miscellaneous section on the OP. Link to comment
PsychoMachina Posted June 17, 2013 Author Share Posted June 17, 2013 A word of caution about installing the vanilla 1st-person skeleton. If you have the Elin race, they will be affected by the vanilla skeleton and their 1st-person view will be changed to adult height. This is because the Elins share the same "_1stperson" folder as the vanilla races. I'll be fixing this when doing a major update. Link to comment
PsychoMachina Posted June 18, 2013 Author Share Posted June 18, 2013 Update News Technically, I'm done with a new skeleton that will replace the two that are currently available. This one is not TBBP, but it does unlock the extra sliders in ECE. The only ones not working are WEIGHT and BUTT. I can make a different skeleton to make those work, but since this is a loli, flatchest race, those sliders may not be that important. The latest skeleton also works with Dual Sheath Redux, but there are some minor clipping that needs to be fixed. Also the unsheathed weapons scaling more or less matches the scaling when sheathed with the exception of the shield and bow. The shield will look smaller when on her back to help minimize clipping and the bow, when drawn, is larger to allow for the bowstring and arrow to be in the correct position. Dual Swords Dual Maces or Axes Shield and Shield with Sword Bow Link to comment
Koko.Hekmatyar Posted June 19, 2013 Share Posted June 19, 2013 Could I make a suggestion with the Skeleton? I notice in the pics the blade looks like it it pretty low on the hip almost where it is by default in the Vanilla game could you adjust that so it is higher on the hip? I don't know why Bes set that position it looks like the sword is hanging off the characters hip by the handle. Link to comment
PsychoMachina Posted June 19, 2013 Author Share Posted June 19, 2013 When I reposition the side weapon nodes to do something about the clipping, I'll also move the swords so that the hilt is at or just forward to the hips, but only just enough so that the unsheathing animation matches. Link to comment
winny257 Posted June 20, 2013 Share Posted June 20, 2013 hi PsychoMachina ! how does that work with the camera work. so if I use such a small breed (child drow) for example, I have a problem with the close-up view you can see only the upside, I have a long way to zoom out to see all my caracter. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now